Filter Your Results

• Keyword
• coupling

---

• Product Type

  

  • 1 1/2 Inch Ground Bushing Alu (1)
  • 1 1/2" to 1" Reducer Steel (1)
  • 1 1/2" to 1/2" Reducer Steel (1)
  • 1 1/2" to 3/4" Reducer Steel (1)
  • 1 1/4 LT 45 Degree Conn Insulated (1)
  • 1 1/4" PVC Coupling Push Fit Grey Kwikon (1)
  • 1 1/4" to 1" Reducer Steel (1)
  • 1 1/4" to 1/2" Reducer Steel (1)
  • 1 CND Exp JNT Int GRD Max CND MVT 4 (1)
  • 1 Cond CPLG Alum (1)
  • 1 Cond CPLGS Galv (1)
  • 1 In Combination Coupling (1)
  • 1 LT Conn Ground Lug (1)
  • 1 SS316 Emt Comp CPLG (1)
  • 1 THD Ent Adapt M CT (1)
  • 1 to 1/2IN Female Reducer Iron (1)
  • 1 Ul Exp CPLG Two Piece (1)
  • 1 Ul Mast Head (1)
  • 1 X 3/4 SS316 Face BSH (1)
  • 1" 3PIECE CPLNGS STL (1)
  • 1" Emt STL Comp CPLNGS Raintgt (1)
  • 1" Hub WTR TGT STL (1)
  • 1" Rig Comp Connstl (1)
  • 1" Rig Comp CPLNGS STL (1)
  • 1" Set Screw Comb. CPLG. (1)
  • 1" SS Split Cuplg Steel (1)
  • 1" to 3/4" Reducer Steel (1)
  • 1/2 3PC Conduit Coupling (1)
  • 1/2 Cond CPLGS Galv (1)
  • 1/2 In Combination Coupling (2)
  • 1/2 LT 45 Deg Conn Ground Lug Insulated (1)
  • 1/2 LT 45 Degree Conn Insulated (1)
  • 1/2 LT 90 Deg Conn Ground Lug Insulated (1)
  • 1/2 RGD SS CPL (1)
  • 1/2 SS316 Emt Comp CPLG (1)
  • 1/2 SS316 FLX Conn Male 90 (1)
  • 1/2 X 12 Div 1 Flex CPLG Male-Female (1)
  • 1/2" 3PIECE CPLNGS STL (1)
  • 1/2" Emt STL Comp CPLNGS Raintgt (1)
  • 1/2" Emt to 1/2" Flex CP (1)
  • 1/2" Rig Comp Connstl (1)
  • 1/2" Rig Comp CPLNGS STL (1)
  • 1/2" Rig Set Screw STL Conn (1)
  • 1/2" Screw-In CPLG. (1)
  • 1/2" Set Screw Comb. CPLG. (1)
  • 1/4-20(3/4LNG) Hexrod CPLNG Nut ZC 30030 (1)
  • 1-1/2 Cond CPLGS Galv (1)
  • 1-1/2 or 2-1/8INBOX SPRT PLSTC (1)
  • 1-1/2 SS316 Emt Comp CPLG (1)
  • 1-1/2 X 1 SS316 Face BSH (1)
  • 1-1/2" 3PIECE CPLNGS STL (1)
  • 1-1/2" Hub WTR TGT STL (1)
  • 1-1/2" Rig Comp Connstl (1)
  • 1-1/2" Rig Comp CPLNGS STL (1)
  • 1-1/4 Cond CPLG Alum (1)
  • 1-1/4 Cond CPLGS Galv (1)
  • 1-1/4 SS316 Emt Comp CPLG (1)
  • 1-1/4" 3PIECE CPLNGS STL (1)
  • 1-1/4" Emt STL Comp CPLNGS Raintgt (1)
  • 1-1/4" Hub WTR TGT STL (1)
  • 1-1/4" Rig Comp Connstl (1)
  • 1-1/4" Rig Comp CPLNGS STL (1)
  • 1-1/4'" Snap In Blank (1)
  • 12.00 X 12.00IN Galvanized Steel Lay-In Wireway Connector (1)
  • 18 X 1-1/2 Nail Plate PG (1)
  • 2 1/2 2 PC Fab Exp CPLG (1)
  • 2 1/2 3PC Conduit Coupling (1)
  • 2 1/2 In Threadless Coupling (1)
  • 2 1/2 LT 90 Degree Conn (1)
  • 2 1/2 RGD CMP Conn (1)
  • 2 1/2 RGD CMP CPL (1)
  • 2 1/2 TC40 L/Long CPLG NS (1)
  • 2 1/2 TC40 LNG LN CS Fab CPLG (1)
  • 2 1/2 Ul Exp CPLG Two Piece (1)
  • 2 1/2 Ul Two Hole Strap (1)
  • 2 CND Exp JNT Int GRD Max CND MVT 4 HDG (1)
  • 2 Cond CPLG Alum (1)
  • 2 Cond CPLGS Galv (1)
  • 2 In T&B Zinc Grounding Conduit Hub (1)
  • 2 In Threadless Coupling (1)
  • 2 Inch Ground Bushing Alu (1)
  • 2 Inch SCH 40 Male Adapter (1)
  • 2 LT Conn Ground Lug (1)
  • 2 SS316 Emt Comp CPLG (1)
  • 2" Beam Clamp (1)
  • 2" Emt STL Comp CPLNGS Raintgt (1)
  • 2" Hub WTR TGT STL (1)
  • 2" Rig Comp Connstl (1)
  • 2" Rig Comp CPLNGS STL (1)
  • 2" to 1 1/2" Reducer Steel (1)
  • 2" to 1" Reducer Steel (1)
  • 2" to 1/2" Reducer Steel (1)
  • 2-1/2 Cond CPLGS Galv (1)
  • 2-1/2" Beam Clamp (1)
  • 3 1/2 Emt CMP CPL (1)
  • 3 1/2 Emt RGD SS CPL (1)
  • 3 1/2 RGD CMP Conn (1)
  • 3 1/2 RGD CMP CPL (1)
  • 3 1/2 Sealing Locknut (1)
  • 3 1/2 TC40 L/Long CPLG NS (1)
  • 3 1/2" Comp. CPLG. (1)
  • 3 Cond CPLGS Galv (1)
  • 3 Gang Deep Box, 1IN & 3/4IN Ko'S (1)
  • 3 Inch Zinc GR Conduit Hub (1)
  • 3 RGD CMP CPL (1)
  • 3 X 2 1/2 B-S Red Swedged (1)
  • 3" 3 Piece Knockout Seal 91007 (1)
  • 3" Emt Rig Dual RTD Comp CPLNGS STL (1)
  • 3" Emt Rig Dual RTD CPLNGS Raintgt STL (1)
  • 3" Hub WTR TGT STL (1)
  • 3" Non-Metallic Split Bush (1)
  • 3/4 Cond CPLG Alum (1)
  • 3/4 Inch Erickson Coupling (2)
  • 3/4 LT Conn Ground Lug (1)
  • 3/4 RGD SS CPL (1)
  • 3/4 SS316 CNTR Sunk HX PLG (1)
  • 3/4 SS316 Emt Comp CPLG (1)
  • 3/4 X 12 Div 1 Flex CPLG Male-Female (1)
  • 3/4 X 12 Div 1 Flex CPLG Male-Male SS (1)
  • 3/4" 3PIECE CPLNGS STL (1)
  • 3/4" Emt to 3/4" Flex CP (1)
  • 3/4" Ermc-SS 304 Elbow - 90 Deg (1)
  • 3/4" Rig Comp Connstl (1)
  • 3/4" Rig Comp CPLNGS STL (1)
  • 3/4" Screw-In CPLG. (1)
  • 3/4" Set Screw Comb. CPLG. (1)
  • 3/4" SS Slip Culpg Steel (1)
  • 3/4-1/2-1/2 Iron Div 1 Tee (1)
  • 3/4IN GRND Bush 14-2/0WIRE Range Al (1)
  • 3/8 LT 90 Degree Conn (1)
  • 3-1/2 Cond CPLGS Galv (1)
  • 3-1/2" Set Screw CPLG. Zinc (1)
  • 3-1/2"Emt Rig DLRTD Set SCRW CPLNGS STL (1)
  • 3-1/2"Emt Rig Dual RTD Comp CPLNGS STL (1)
  • 3-1/2"GR.Bush.Lay-Inlg (1)
  • 4 3PC Conduit Coupling (1)
  • 4 Cond CPLGS Alum (1)
  • 4 Cond CPLGS Galv (1)
  • 4 RGD CMP Conn (1)
  • 4 RGD CMP CPL (1)
  • 4" Non-Metallic Split Bush (1)
  • 5 TC40 Long Line CPLG NS (1)
  • 6 Cond CPLGS Galv (1)
  • 6 TC40 Long Line Rep CPLG NS (1)
  • 6 TC6 Fab 5DEG CPLG B/B (1)
  • 6 X 1-1/2 Nail Plate PG (1)
  • 6.3V .15A T3-1/4 Miniature Bayonet Base (1)
  • Adapter (12)
  • Adapter SQ 1/2 In. (1)
  • Adapter SQ 3/8 In. (1)
  • Bolt (5)
  • Box Adapter (6)
  • Box Support (1)
  • Cast Device Box Cover (2)
  • CH Myers 1 1/2 Alum Hub (1)
  • CH Myers 1 1/2 Alum Through Bulkhead (1)
  • CH Myers 1 Alum Through Bulkhead (1)
  • CH Myers 2 Alum Through Bulkhead (1)
  • CH Myers 3 1/2 Zinc Conduit Hub (1)
  • CH Myers 3 Alum Hub (1)
  • CH Myers 3/4 Alum Through Bulkhead (1)
  • Channel Bar (1)
  • Clamp (8)
  • Coated Conduit (1)
  • Coaxial Adapter, GC Waldom Electronics, Splice, "F" Fem to Fem (1)
  • Combination Coupling (4)
  • Commercial Fittings (8)
  • Commercial Hub (10)
  • Compression Coupling (10)
  • Cond 1" 304 (1)
  • Cond 1-1/2" 304 (1)
  • Cond 2" 304 (1)
  • Cond 3/4" 304 (1)
  • Conduit Body (90)
  • Conduit Body and Cover (5)
  • Conduit Body Cover (1)
  • Conduit Coupling (30)
  • Conduit Hanger (1)
  • Conduit Hub Swing 1/2" (1)
  • Conduit Nipple (120)
  • Conduit Outlet Box (8)
  • Conduit Strap (1)
  • Conduit Support (7)
  • Conduit Union (18)
  • Connector (40)
  • Coupler (14)
  • Coupling (61)
  • Coupling Nut (3)
  • Cover (4)
  • Device Box (17)
  • Device Box Cover (2)
  • Elbow (50)
  • Emt Compression Coupling (52)
  • Emt Set Screw Coupling (28)
  • EMT Standard Radius Elbow (6)
  • EMT/FMC Combination Coupling (2)
  • End Ball (4)
  • End Cap (6)
  • Ent Adptr 1IN Blue PC (1)
  • ENT Flexible Raceway (2)
  • Expansion Coupling (5)
  • Female Adapter (1)
  • Flexible Conduit (1)
  • Flexible Coupling (2)
  • Gfci Plugmold 3FT White (1)
  • Ground Hub (8)
  • Grounding Bushing (5)
  • Hub (11)
  • Hub Connector (10)
  • Knockout Hub (21)
  • Liquid Tight 45° Connector (6)
  • Liquid Tight 45°Connector (6)
  • Liquid Tight 90° Connector (7)
  • Liquid Tight 90°Connector (7)
  • Liquid Tight Straight Connector (3)
  • Liquidtight Conduit Connector (1)
  • Liquidtight Connector (1)
  • Meter Offset (2)
  • Mini-Com® F-Type Coupler Module, 3 GHZ, White (1)
  • Myers Hub (2)
  • N1 Wireway Connector Galvanized (4)
  • No-1 Anti-Short Bushing (1)
  • No-3 Anti-Short Bushing (1)
  • Plastic Bushing (10)
  • Plastic Stud Bushing 1000 (1)
  • Plug (1)
  • Primer PVC Low Voc PT #10 (1)
  • Pull Elbow (3)
  • PVC Coated Steel Rigid Conduit Standard Radius Elbow (2)
  • PVC Long Line Coupling 4 (1)
  • Raintight Compression Coupling (5)
  • Reducer Bushing (16)
  • Rigid Conduit Compression Connector (3)
  • Rigid Conduit Coupling (13)
  • Rigid Conduit Nipple (9)
  • Rigid Pipe Cap (2)
  • Sealing Fitting (18)
  • Sealing Locknut (9)
  • Set Screw Coupling (9)
  • Snap-in Terminal Adapter (2)
  • Standard Radius Elbow (6)
  • Surface Raceway, LD10 / LDPH10 Coupler, Power Rated, White (1)
  • Surface Raceway, LD5 / LDPH5 Coupler, Power Rated, White (1)
  • Surface Raceway, T-70 Base Coupler, White (1)
  • Terminal Adapter (10)
  • Threaded Hub (5)
  • Threadless Coupling (6)
  • U-Bolt (5)
  • Union (8)
  • Watertight Hub (10)
  • Show More...

• Brand

  

  • Allied Tube & Conduit (1)
  • Allied Tube and Conduit (16)
  • American Fittings Corp (16)
  • Amfico (44)
  • Appleton (68)
  • Appleton/Oz Gedney (4)
  • APPOZGCOMM (4)
  • ARLINGTON (4)
  • Arlington Industries (22)
  • Blackclaw (1)
  • Brad (1)
  • Bridgeport (99)
  • Bridgeport Fittings (81)
  • CALBRITE (38)
  • Calpipe Industries, Inc (2)
  • Carlon (16)
  • Carlon(R) (2)
  • Conduit Pipe Products (15)
  • Crouse Hinds (1)
  • CULLY (2)
  • DURA-LINE CORPORATION (1)
  • Eaton (169)
  • EATON CROUSE-HINDS SERIES (71)
  • EC-KORNS (69)
  • Ecn/Korns (2)
  • ECN-KORNS (155)
  • Eiko (1)
  • GC/Waldom Electronics (1)
  • Hubbell--Killark (2)
  • HUGH CUNNINGHAM COMPANY (1)
  • Ipex Usa LLC-233406 (1)
  • KICHLER (1)
  • KILLARK (13)
  • Klein Tools (1)
  • Kraloy (5)
  • KWIKON (2)
  • LEGRAND-ON-Q (1)
  • LH DOTTIE (8)
  • Lithonia Lighting (1)
  • Milwaukee® (3)
  • Multi Fittings/Kraloy (2)
  • NSi (2)
  • nVent CADDY (4)
  • nVent ERICO (2)
  • OCAL (4)
  • O-Z/GEDNEY (23)
  • PANDUIT (6)
  • Panduit® (1)
  • Pass & Seymour (2)
  • Pass and Seymour (3)
  • Patriot Aluminum (4)
  • Patriot Industries (2)
  • Peco Fasteners (3)
  • Peco Fasteners, Inc. (5)
  • PLASTIBOND (202)
  • PVC & Accessories (153)
  • RACO (10)
  • Rectorseal (1)
  • ROBROY (80)
  • Robroy Stainless (4)
  • Robroy/Ecn Korns (9)
  • Robroy/Plasti-Bond (3)
  • Southwire (2)
  • Southwire Rough Electrical Com (16)
  • STANLEY SALES CO LLC (2)
  • Star Teck (1)
  • Steel City (31)
  • STEREN ELECTRONICS INTL (1)
  • T&B Ind Fitting (68)
  • T&B Rigid Fittings (1)
  • Thomas & Betts (2)
  • Thomas&Betts-Abb Ins Prod (6)
  • Topaz - Southwire CO LLC (1)
  • Topaz Electric - Southwire (1)
  • Unity (5)
  • Vericom (1)
  • Westgate MFG, Inc. (2)
  • Westinghouse Lighting (1)
  • WIREMOLD (13)
  • Show More...

• Finish

  

  • #4 Polished Finish (21)
  • 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (2)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior (2)
  • 2 Mil Red Urethane Coated Over Galvanized Threads Interior, 40 Mil Gray PVC Coated Exterior (16)
  • 2 MIL RED URETHANE INTERIOR, 40 MIL GRAY PVC EXTERIOR COATED (3)
  • 20 MIL GRAY PVC COATED (5)
  • 20 Mil Gray PVC Coated (Exterior) (1)
  • Aluminum (5)
  • Ball burnish (19)
  • Ball Burnished (3)
  • Ball Burnished;Mirror Smooth (25)
  • Black (2)
  • Bronze/Dark (1)
  • Brushed (4)
  • Caddy Armour (1)
  • Caddy?® Armour (1)
  • Electrogalvanized With Aluminum Acrylic Painted (1)
  • Enamel (8)
  • Galvanized (111)
  • Galvanized;Bright Polished (1)
  • Galvanized;PVC Coated (Exterior);Urethane Coated (Interior) (5)
  • Gloss (1)
  • Gray (1)
  • Hot Dip Galvanized (32)
  • Hot Dip Galvanized;PVC Coated (1)
  • HOT DIPPED GALVANIZED (3)
  • Hot-Dip Galvanized (3)
  • Molded plastic chemically etched with diamond core finish (1)
  • Natural (46)
  • NICKEL CHROME PLATED (8)
  • NO FINISH (22)
  • Plain (1)
  • POLISHED (7)
  • Polyurethane Coated (1)
  • Powder Coat (1)
  • Pre-Galvanized (1)
  • PVC (Exterior Coating);Urethane (Interior Coating) (3)
  • RED URETHANE COATED INTERIOR, GRAY PVC COATED EXTERIOR (7)
  • Silver (1)
  • STOOW (1)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (1)
  • Untreated (1)
  • Zinc (6)
  • Zinc Electroplate (3)
  • Zinc Electroplated (23)
  • Zinc Electro-Plated (21)
  • Zinc Plated (92)
  • Show More...

• Trade Size

  

  • 0 (1)
  • 0.5 (21)
  • 0.5 in (1)
  • 0.75 (24)
  • 0.75 in (1)
  • 0.975 x 0.975 x 2.22 (1)
  • 1 (48)
  • 1 1/2 (4)
  • 1 1/2 IN (1)
  • 1 1/2 in. (1)
  • 1 1/4 (5)
  • 1 1/4 in (4)
  • 1 1/4 in. (1)
  • 1 in (42)
  • 1 in. (2)
  • 1 INCH (57)
  • 1 PH (2)
  • 1 TO 1 1/4 INCH (1)
  • 1 to 1/2 in (1)
  • 1 x 3/4 in (1)
  • 1.25 (15)
  • 1.25 in (7)
  • 1.5 (20)
  • 1.5 in in (1)
  • 1/2 (15)
  • 1/2 in (53)
  • 1/2 INCH (53)
  • 1/2 to 3/4 in (1)
  • 1/2 to 3/8 in (1)
  • 1-1/2 (6)
  • 1-1/2 in (29)
  • 1-1/2 INCH (20)
  • 1-1/2 Inch, 2 Inch (1)
  • 1-1/4 (2)
  • 1-1/4 in (24)
  • 1-1/4 INCH (19)
  • 1-1/4 to 3 (1)
  • 2 (34)
  • 2 1/2 (5)
  • 2 1/2 in (5)
  • 2 1/2 x 2 (1)
  • 2 A (2)
  • 2 Conduit (1)
  • 2 in (47)
  • 2 in. (2)
  • 2 INCH (52)
  • 2 x 1-1/2 in (1)
  • 2 x 4 Stud Size (1)
  • 2.5 (15)
  • 2-1/2 (1)
  • 2-1/2 IN (16)
  • 2-1/2 in. (3)
  • 2-1/2 INCH (6)
  • 2-1/2 Inch, 3 Inch (2)
  • 2-1/2 Inch-8 TPI (1)
  • 2-1/2 x 2 in (1)
  • 3 (28)
  • 3 1/2 (3)
  • 3 in (27)
  • 3 in. (3)
  • 3 INCH (34)
  • 3 pipe (1)
  • 3 x 2 (1)
  • 3 x 2 in (1)
  • 3 x 2 in. (1)
  • 3 x 2-1/2 in (1)
  • 3 x 2-1/2 in. (1)
  • 3.5 (8)
  • 3.5 in (1)
  • 3/4 (17)
  • 3/4 in (61)
  • 3/4 IN EMT (1)
  • 3/4 in EMT to 3/4 in Flex (1)
  • 3/4 in. (1)
  • 3/4 INCH (54)
  • 3/4 to 1/2 in (1)
  • 3/4 to 3/4 in (1)
  • 3/4 x 1/2 in (1)
  • 3/4-1/2 (1)
  • 3/8 in (1)
  • 3/8/2015 (1)
  • 3-1/2 in (7)
  • 3-1/2 in. (1)
  • 3-1/2 INCH (6)
  • 3-1/2 Inch, 4 Inch (1)
  • 3-1/2 Inch-8 TPI (1)
  • 31531 (1)
  • 4 (21)
  • 4 in (23)
  • 4 in. (2)
  • 4 INCH (33)
  • 4 x 3 (1)
  • 4 x 3 in (1)
  • 5 (6)
  • 5 in. (1)
  • 5 INCH (4)
  • 5 pipe (1)
  • 6 (4)
  • 6 in (2)
  • 6 INCH (4)
  • 798 (1)
  • Show More...

• Color

  

  • Black (27)
  • Blue (7)
  • Bronze (1)
  • Colorless (4)
  • Dark Gray (1)
  • Glossy gray (11)
  • Gray (97)
  • Gray (Exterior Coating);Red (Interior Coating) (3)
  • Gray (Exterior);Red (Interior) (5)
  • Grey (3)
  • Grey with Black Insulator (4)
  • Ivory (2)
  • K (1)
  • MALLEABLE IRON (43)
  • Metallic (34)
  • Metallic Body/Green Nut (3)
  • Natural (1)
  • Polished Silver (22)
  • Red (5)
  • Silver (41)
  • White (5)
  • Yellow (2)
  • Show More...

• Model

  

  • 5000S (2)
  • 6000S (7)
  • ALUCPLG (1)
  • ALUELB (6)
  • ALUNIP (32)
  • BG (3)
  • CHB (10)
  • CPR (13)
  • ECLK (2)
  • EMTELB (20)
  • EYD (1)
  • EYS (17)
  • FB812M (1)
  • FD (2)
  • FDC (2)
  • FS (5)
  • FSC (6)
  • GALCPLG (1)
  • GALELB (30)
  • GALNIP (89)
  • GUA (4)
  • GUAB (1)
  • GUAC (1)
  • GUAL (2)
  • GUAT (3)
  • GUAX (2)
  • HUB (6)
  • KNET (1)
  • KNPAR (3)
  • KNRA (3)
  • LBY (2)
  • Mini-Com® (1)
  • NTC (3)
  • NTCC (1)
  • PBGLL (4)
  • PBPS (1)
  • PR5 (15)
  • PRC (3)
  • PRHLL (1)
  • PRLB (2)
  • PRLL (3)
  • PRLR (4)
  • PRST (2)
  • PRTB (1)
  • PRUNF (3)
  • PRUNY (6)
  • PV (2)
  • RE (8)
  • REC (1)
  • Series PRC (2)
  • Series PRCPLG (2)
  • ST (13)
  • STG (8)
  • TC-500 (1)
  • TPC (2)
  • UNF (2)
  • UNY (4)
  • Show More...

• Material

  

  • 0.002 Inch Red Urethane Ferrous Metal Interior, 0.04 Inch Gray PVC Coated Ferrous Metal Exterior (1)
  • 18-8 STAINLESS STEEL (2)
  • 2 MIL Red Urethane Aluminum (Interior), 40 MIL Gray PVC Aluminum (Exterior) (2)
  • 2 Mil Red Urethane Coated Aluminum Body Interior, 40 Mil Gray PVC Coated Aluminum Body Exterior (4)
  • 2 Mil Red Urethane Coated Aluminum Body Interior, 40 Mil Gray PVC Coated Ferrous Metal Body Exterior (3)
  • 2 MIL RED URETHANE COATED ALUMINUM INSIDE, 40 MIL GRAY PVC COATED ALUMINUM OUTSIDE (2)
  • 2 Mil Red Urethane Coated Ferrous Metal Body Interior, 40 Mil Gray PVC Coated Ferrous Metal Body Exterior (40)
  • 2 Mil Red Urethane Coated Ferrous Metal Body Interior/Exterior (4)
  • 2 Mil Red Urethane Coated Ferrous Metal Interior, 40 Mil Gray PVC Coated Ferrous Metal Exterior (15)
  • 2 MIL RED URETHANE COATED INTERIOR, 40 MIL GRAY PVC COATED EXTERIOR FERROUS (1)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Aluminum (1)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Aluminum (Body), Stainless Steel (Screw) (5)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (37)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (Body), Stainless Steel (Screw) (61)
  • 2 Mil Red Urethane Coated Interior/Exterior Ferrous Metal (2)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (13)
  • 2 MIL Red Urethane Ferrous Metal Interior, 40 MIL Gray PVC Ferrous Metal Exterior (26)
  • 20 Mil Gray PVC Coated Malleable Iron (1)
  • 304 Stainless Steel (3)
  • 316 Stainless Steel (14)
  • 360 Aluminum (4)
  • 40 Mil Gray PVC Coated Ferrous Metal (2)
  • 40 Mil Gray PVC Coated Ferrous Metal Body Interior/Exterior (2)
  • 40 MIL GRAY PVC EXTERIOR, 2 MIL RED URETHANE INTERIOR COATED ALUMINUM (5)
  • ABS (2)
  • Aluminum (101)
  • Aluminum/Stainless Steel (3)
  • Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene (3)
  • Carbon Steel (3)
  • Copper (1)
  • Copper Free Aluminum (6)
  • Die-Cast Zinc (3)
  • ELECTROGALVANIZED STEEL (2)
  • FERROUS (6)
  • Ferrous Metal (4)
  • Galvanized Steel (32)
  • GRAY PVC 40 MIL EXTERIOR, RED URETHANE 2 MIL INTERIOR COATED FERROUS (1)
  • HDPE;PVC Conduit;Stainless Steel (Clamp) (1)
  • High Carbon Steel/Spring Tempered (1)
  • HIGH IMPACT THERMOPLASTIC (2)
  • IRON (3)
  • Iron;Malleable (1)
  • Malleable Iron (58)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (16)
  • Malleable Iron And Steel (2)
  • Malleable Iron Body, Plastic Throat Liner (5)
  • Non-Metallic (3)
  • Nylon Plastic (7)
  • Phenolic (18)
  • Plastic (21)
  • Plated Steel (4)
  • Polycarbonate (2)
  • Polyurethane (1)
  • POLYURETHANE COATED FERROUS (4)
  • Porcelain, Steel (1)
  • PVC (34)
  • PVC Coated Zinc (1)
  • RED URETHANE (INSIDE) GRAY PVC (OUTSIDE) COATED ALUMINUM BODY, PVC SEALING GASKET (4)
  • RED URETHANE 2 MIL COATED INTERIOR, GRAY PVC 40 MIL COATED EXTERIOR ALUMINUM (BODY), STAINLESS STEEL SCREW (1)
  • Schedule 40 PVC (1)
  • Spring Steel (1)
  • Stainless Steel (4)
  • Stainless Steel - 304L (5)
  • Stainless Steel - 316 (6)
  • Steel (207)
  • Zamek-2, Zamek-3 Type Zinc Body and Nut, Neoprene Gasket, Lexan 920A Insuliner (10)
  • Zinc (42)
  • Zinc Alloy (1)
  • Zinc Die Cast (56)
  • ZINC PLATED STEEL (9)
  • Show More...

• Shape

  

  • Angle (2)
  • Deep (6)
  • LB (1)
  • Rectangular (1)
  • Round (13)
  • Shallow (11)
  • Square (1)
  • Straight (65)
  • T (2)
  • T3-1/4 (1)
  • Show More...

• Bend Radius

  

  • 13 in (2)
  • 13 INCH (6)
  • 16 in (1)
  • 16 INCH (7)
  • 24 INCH (4)
  • 30 INCH (1)
  • 36 INCH (6)
  • 4 INCH (1)
  • 4.25 in (2)
  • 4.25 INCH (2)
  • 4.5 in (2)
  • 4.5 INCH (4)
  • 48 INCH (1)
  • 5.75 in (2)
  • 5.75 INCH (7)
  • 8.25 INCH (1)
  • 9.5 in (3)
  • 9.5 INCH (6)
  • Show More...

• Number Of Gangs

  

  • 1 (18)
  • 2 (6)
  • Show More...

• For Use With

  

  • 1/2 in EMT;14/2 and 12/2 Romex Non-Metallic Cable (1)
  • Aluminum or Steel Electrical Metallic Tubing (10)
  • Box;Enclosure (2)
  • Coaxial Network (1)
  • Connect Rigid and IMC Conduit to a Threadless Opening in an Enclosure (6)
  • Couple Threaded Rod (1)
  • Electric Metallic Tubing (4)
  • EMT Conduit (71)
  • EMT Conduit;Boxes and Enclosures (8)
  • EMT Conduit;Combination Head Receptacle;Switch and Panel Screws (1)
  • EMT Conduit;IMC Conduit;Rigid Conduit (3)
  • EMT to Flexible Metal Conduit (1)
  • ENT Box (2)
  • Entering The Conduit into the Building (6)
  • Flexible Metal Conduit;EMT (2)
  • HVAC Equipment (1)
  • IMC/Rigid Conduit (5)
  • Joining Lengths of Steel EMT to Rigid Metal/IMC Conduit (1)
  • Liquidtight Flexible Metallic Conduit (16)
  • Locknut;Box or Connector (10)
  • Metallic Rigid and IMC Conduit (13)
  • Rigid and IMC Conduit (33)
  • Rigid and IMC Conduit;Box or Enclosure (4)
  • Rigid and Intermediate Conduit (6)
  • Rigid Conduit (46)
  • Rigid Conduit;IMC Conduit (9)
  • Rigid Metal Conduit (3)
  • Schedule 40 & 80 Conduit (3)
  • Schedule 40 and 80 Conduit (57)
  • Secure and Terminate Steel EMT to Knockouts and Concrete Tight Box (2)
  • Steel and Aluminum EMT (6)
  • Steel and Aluminum EMT;Steel and Aluminum Rigid Conduit (3)
  • Threaded Conduit (1)
  • Threadless Rigid Metal Conduit/IMC (4)
  • Two Lengths of EMT Conduit;Rigid and IMC Conduit (4)
  • Type EB and DB Utility Duct (2)
  • Wire Installation (1)
  • Show More...

• Knockout Size

  

  • 0.88 in (1)
  • 1.13 in (1)
  • 1.38 in (1)
  • 2.50 in (1)
  • 3.63 in (1)
  • 4.63 in (1)
  • Show More...

• Length

  

  • .875 in. (2)
  • 0.5337 in (1)
  • 0.5457 in (1)
  • 0.6828 in (1)
  • 0.7068 in (1)
  • 0.7235 in (1)
  • 0.7565 in (1)
  • 0.7935 in (1)
  • 0.84 in (2)
  • 0.94 in (1)
  • 0.99 (1)
  • 1 (5)
  • 1 in (1)
  • 1.03 in (1)
  • 1.12 in (1)
  • 1.1375 in (1)
  • 1.17 in (1)
  • 1.2 in (1)
  • 1.24 (1)
  • 1.26 in (1)
  • 1.3 in (1)
  • 1.31 in (1)
  • 1.32 (1)
  • 1.375 in. (1)
  • 1.38 in;35.1 mm (1)
  • 1.406 in (1)
  • 1.42 Inch (1)
  • 1.470000000000000;37.3380 (1)
  • 1.5 (1)
  • 1.5 in (2)
  • 1.50 in;38.1 mm (1)
  • 1.510000000000000;38.3540 (1)
  • 1.541 in (1)
  • 1.554 (1)
  • 1.56 (1)
  • 1.56 in (2)
  • 1.563 INCH (1)
  • 1.625 in (5)
  • 1.625 INCH (1)
  • 1.63 in (2)
  • 1.63 in;41.4 mm (1)
  • 1.640625 (1)
  • 1.65 (1)
  • 1.66 in;42.2 mm (1)
  • 1.660 in (2)
  • 1.665 (1)
  • 1.70 in;43.2 mm (1)
  • 1.720000000000000;43.6880 (1)
  • 1.75 (3)
  • 1.75 in (1)
  • 1.75 INCH (2)
  • 1.761 (1)
  • 1.763 (1)
  • 1.797 (1)
  • 1.81 INCH (2)
  • 1.83 in (1)
  • 1.875 in (3)
  • 1.88 in (1)
  • 1.890 in;48.0 mm (1)
  • 1.934 in (1)
  • 1.938 in. (1)
  • 1.96875 in (1)
  • 1.988 (1)
  • 1/2 in (1)
  • 10 (3)
  • 10 INCH (16)
  • 101.6000;4.000000000000000 (1)
  • 103.1240;4.060000000000000 (1)
  • 10351 (1)
  • 1-1/2 (1)
  • 1-1/2 in (3)
  • 1-1/2 INCH (3)
  • 1-1/4 (2)
  • 1-1/4 in (1)
  • 1-1/8 (2)
  • 1-1/8 in (5)
  • 1-11/16 in (2)
  • 1-13/32 (2)
  • 1-15/16 in (2)
  • 118.92 (3)
  • 12 (4)
  • 12 INCH (16)
  • 120 (10)
  • 1-3/4 (1)
  • 1-3/4 in (2)
  • 1-3/8 (1)
  • 1-3/8 in (2)
  • 1-31/32 (1)
  • 1-39/64 in (1)
  • 1-5/8 (1)
  • 1-5/8 in (1)
  • 1-55/64 in (1)
  • 1-7/16 in (2)
  • 18 (6)
  • 18" (1)
  • 2 (2)
  • 2 in (8)
  • 2 INCH (13)
  • 2 Mil Red Urethane Coated Ferrous Metal Body Interior, 40 Mil Gray PVC Coated Ferrous Metal Body Exterior (3)
  • 2.000000000000000;50.8000 (1)
  • 2.03125 (2)
  • 2.06 in (2)
  • 2.0625 in (1)
  • 2.063 Inch (2)
  • 2.08 (1)
  • 2.1 (1)
  • 2.109 (1)
  • 2.125 (1)
  • 2.125 in (4)
  • 2.125 Inch (1)
  • 2.130000000000000;54.1020 (1)
  • 2.14 (1)
  • 2.15 (1)
  • 2.205 (1)
  • 2.25 in (1)
  • 2.31 in (1)
  • 2.35 (1)
  • 2.374 in (1)
  • 2.375 (1)
  • 2.375 in (1)
  • 2.375 in. (1)
  • 2.38 (4)
  • 2.38 Inch (2)
  • 2.384 (1)
  • 2.43 (1)
  • 2.44 in (1)
  • 2.44 INCH (1)
  • 2.5 (2)
  • 2.5 in (2)
  • 2.50 in;63.5 mm (3)
  • 2.500 in (2)
  • 2.54 (2)
  • 2.6 (2)
  • 2.63 INCH (1)
  • 2.734 (1)
  • 2.75 in (2)
  • 2.75 INCH (2)
  • 2.77 (1)
  • 2.776 (1)
  • 2.87 (1)
  • 2.875 in (1)
  • 2.875 in. (1)
  • 2.88 in (1)
  • 2.880000000000000;73.1520 (1)
  • 2.98 (1)
  • 2-1/16 in (2)
  • 2-1/2 in (1)
  • 2-1/32 in (1)
  • 2-1/4 in (1)
  • 2-1/8 (1)
  • 2-11/32 in (2)
  • 23.688 in. (1)
  • 24 (3)
  • 24 in;610 mm (1)
  • 2-41/64 in (3)
  • 25 in (1)
  • 2-5/8 in (2)
  • 2-5/8 INCH (2)
  • 26.625 in (1)
  • 2-7/16 (1)
  • 2-7/32 in (1)
  • 2-7/64 in (1)
  • 2-7/8 in (1)
  • 2-7/8 INCH (2)
  • 3 (1)
  • 3 in (3)
  • 3 INCH (11)
  • 3.060 in (1)
  • 3.125 Inch (1)
  • 3.187 in (1)
  • 3.19 INCH (2)
  • 3.25 (1)
  • 3.272 (1)
  • 3.28 (1)
  • 3.310000000000000;84.0740 (1)
  • 3.38 INCH (1)
  • 3.40625 in (1)
  • 3.44 in (1)
  • 3.515625 (1)
  • 3.53 (1)
  • 3.56 Inch (2)
  • 3.563 in. (1)
  • 3.63 (2)
  • 3.69 INCH (1)
  • 3.75 INCH (3)
  • 3.750000000000000;95.2500 (1)
  • 3.833 (1)
  • 3.875 (1)
  • 3.88 (1)
  • 3/4 in (1)
  • 3-1/2 in (2)
  • 3-1/4 in (3)
  • 3-3/4 in (2)
  • 3-9/32 in (2)
  • 4 (4)
  • 4 in (5)
  • 4 in. (1)
  • 4 INCH (17)
  • 4.008 (1)
  • 4.094 (1)
  • 4.188 (1)
  • 4.25 (1)
  • 4.281 in (1)
  • 4.32 (1)
  • 4.331 (1)
  • 4.5 (1)
  • 4.5 in (1)
  • 4.5 in. (1)
  • 4.500 in (1)
  • 4.652 (1)
  • 4.75 in. (1)
  • 4.75 in;120.7 mm (1)
  • 4.75 INCH (2)
  • 4.81 (1)
  • 4.938 in. (1)
  • 4.958 in (1)
  • 5 (1)
  • 5 INCH (8)
  • 5.375 in (1)
  • 5.395 in (1)
  • 5.6 in (1)
  • 5.783 (1)
  • 5.8 in (2)
  • 5-1/4 in (1)
  • 52062 (1)
  • 5-5/8 in (1)
  • 6 (2)
  • 6 in (1)
  • 6 INCH (13)
  • 6" (1)
  • 6.063 in (1)
  • 6.188 in. (1)
  • 6.28 in (1)
  • 6.282 (1)
  • 6.375 (2)
  • 6.375 in (1)
  • 6.5 (1)
  • 6.625 in. (1)
  • 6.75 (1)
  • 6.89 (1)
  • 6.95 (1)
  • 7.44 INCH (1)
  • 7.75 in (1)
  • 7/8 (3)
  • 8 in (1)
  • 8 INCH (12)
  • 9 in (1)
  • 9.63 INCH (1)
  • 9.94 ft;3.03 m (1)
  • Strip: 1-1/4 in;Body: 2.530 in (1)
  • Show More...

• Diameter

  

  • 0.25 in (1)
  • 0.375 in (1)
  • 0.5 in (1)
  • 0.813 in (2)
  • 0.84 in;21.3 mm (1)
  • 0.937 in (1)
  • 0.94 in (1)
  • 1.08 in (2)
  • 1.19 in (1)
  • 1.25 in (3)
  • 1.31 in (1)
  • 1.31 in;33.3 mm (1)
  • 1.38 in;35.1 mm (1)
  • 1.44 in (3)
  • 1.53 in (1)
  • 1.563 in (4)
  • 1.57 in;39.9 mm (1)
  • 1.58 INCH (1)
  • 1.63 in (2)
  • 1.630 in;41.40 mm (1)
  • 1.69 in (2)
  • 1.69 in;42.9 mm (1)
  • 1.875 in (1)
  • 1.88 in (2)
  • 1.89 INCH (1)
  • 1.94 in;49.3 mm (1)
  • 1.96 INCH (1)
  • 1-1/16 in (2)
  • 1-1/2 in (2)
  • 1-1/4 in (2)
  • 1-1/8 in (5)
  • 1-11/16 in (3)
  • 1-11/32 in (1)
  • 1-15/16 in (2)
  • 1-17/32 in (2)
  • 1-17/32 in;44.45 mm (1)
  • 1-29/32 in (1)
  • 1-29/32 in;48.42 mm (1)
  • 1-3/8 in (2)
  • 1-5/16 in (1)
  • 1-57/64 in (1)
  • 1-7/16 in (4)
  • 1-7/32 in (1)
  • 1-7/32 in;30.96 mm (1)
  • 1-7/8 in (1)
  • 1-9/16 in (1)
  • 1-9/32 in (2)
  • 2 in (2)
  • 2 in;50.80 mm (1)
  • 2 INCH (4)
  • 2.08 in (1)
  • 2.125 in (1)
  • 2.13 in;54.1 mm (1)
  • 2.18 in (1)
  • 2.25 in (3)
  • 2.25 INCH (3)
  • 2.38 in;60.5 mm (1)
  • 2.438 in (3)
  • 2.44 in (1)
  • 2.5 in (2)
  • 2.75 INCH (3)
  • 2.83 INCH (1)
  • 2.94 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (1)
  • 2-13/16 in (1)
  • 2-15/16 in (1)
  • 2-23/32 in (1)
  • 2-3/16 in (1)
  • 2-3/4 in (1)
  • 2-3/8 in (2)
  • 2-35/64 in (1)
  • 2-9/16 in (2)
  • 3 in (2)
  • 3 INCH (3)
  • 3.25 in (1)
  • 3.26 in (1)
  • 3.5 Inch (3)
  • 3.58 INCH (3)
  • 3.62 in (1)
  • 3.84 INCH (1)
  • 3.89 in (1)
  • 3/8 in (2)
  • 3-1/4 in (2)
  • 3-1/4 in;82.55 mm (1)
  • 3-1/8 in (1)
  • 3-13/16 in (1)
  • 3-3/4 in (1)
  • 3-3/64 in (1)
  • 3-3/8 in (1)
  • 3-9/16 in (1)
  • 4.188 in (2)
  • 4.25 in (1)
  • 4.25 in;108.0 mm (1)
  • 4.38 in (1)
  • 4.5 INCH (3)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-13/16 in (2)
  • 4-25/32 in (1)
  • 4-3/16 in (1)
  • 4-3/8 in (1)
  • 4-5/16 in (2)
  • 5 in (1)
  • 5.14 INCH (1)
  • 5.25 in (1)
  • 5.47 in (1)
  • 5.75 in (1)
  • 5.83 INCH (4)
  • 5-1/2 in (1)
  • 5-1/8 in (1)
  • 5-23/64 in (1)
  • 5-3/8 in (1)
  • 6.27 INCH (1)
  • 7/8 in (2)
  • 9/16 in (1)
  • Show More...

• Connection Size

  

  • 1 in (1)
  • 1/2 in (2)
  • 1-1/2 in (1)
  • 1-1/4 in (1)
  • 2 in (2)
  • 2-1/2 in (1)
  • 3 in (1)
  • 3/4 in (1)
  • 3-1/2 in (1)
  • 4 in (1)
  • End 1: 1.57 in;39.9 mm;End 2: 1.30 in;33.0 mm (1)
  • End 1: 2.13 in;54.1 mm;End 2: 1.88 in;47.8 mm (1)
  • Show More...

• Connection Type

  

  • Ball to Plain (1)
  • C x C (1)
  • Combination (7)
  • Compression (1)
  • External Threaded (7)
  • F (1)
  • Female (3)
  • Female to Male (3)
  • FEMALE, FEMALE (9)
  • Male (10)
  • MALE, FEMALE (9)
  • NPSM (6)
  • NPT (20)
  • Rigid (8)
  • Set Screw (4)
  • Snap-In (2)
  • Threaded (76)
  • Threaded Metal Conduit to PVC Conduit (1)
  • Show More...

• Thread Length

  

  • 0.64 in (2)
  • 0.78 in (2)
  • 1.06 in (2)
  • 1.5 INCH (3)
  • 1.75 INCH (2)
  • 3/8 in (1)
  • 5/8 in (3)
  • Show More...

• Thread Size

  

  • 1/2 in - 13 (1)
  • 1/2-13 (1)
  • 1/4 in - 20 (1)
  • 1/4-20 (1)
  • 3/8 in - 16 (2)
  • 3/8-16 (1)
  • Show More...

• Cable Size

  

  • .250 (1)
  • .375 (1)
  • 0.525 to 0.650 in (1)
  • 3/4 IN Rigid And EMT (1)
  • Show More...

• Width

  

  • .875 in. (2)
  • 0.61 (1)
  • 0.84 in (1)
  • 0.87 (1)
  • 1 in (1)
  • 1.05 (3)
  • 1.18 (1)
  • 1.19 in (1)
  • 1.25 (3)
  • 1.311 in (1)
  • 1.315 (1)
  • 1.32 (1)
  • 1.375 in. (1)
  • 1.44 in;36.6 mm (1)
  • 1.441 (1)
  • 1.55 (1)
  • 1.62 (1)
  • 1.64 in (1)
  • 1.67 in;42.4 mm (1)
  • 1.688 in. (1)
  • 1.788 in;45.4 mm (1)
  • 1.9 (1)
  • 1.938 in (1)
  • 1.938 in. (1)
  • 1.94 (1)
  • 1.94 in (1)
  • 1.99 in;50.5 mm (1)
  • 1.995 (1)
  • 1.997 (1)
  • 1/2 (2)
  • 1/4 (2)
  • 1-1/2" (2)
  • 1-1/4 in (1)
  • 1-15/16 in (1)
  • 1-5/8 in (2)
  • 1-9/16 in (1)
  • 2 (6)
  • 2.04 in (2)
  • 2.14 (1)
  • 2.17 in (1)
  • 2.2 (1)
  • 2.25 (1)
  • 2.375 (1)
  • 2.375 in (1)
  • 2.375 in. (1)
  • 2.38 (3)
  • 2.75 (1)
  • 2.8 (1)
  • 2.87 (1)
  • 2.875 in. (1)
  • 2-11/16 in (1)
  • 2-3/16 in (1)
  • 2-7/8 (1)
  • 3.063 in (1)
  • 3.21 (1)
  • 3.23 in;82.0 mm (1)
  • 3.5 in. (1)
  • 3.500 in (1)
  • 3.515 in (Dia.) (1)
  • 3.53 (1)
  • 3.563 in. (1)
  • 3/8 (2)
  • 3-1/32 in (1)
  • 3-1/8 in (1)
  • 3-13/16 in (1)
  • 4 (2)
  • 4 in. (1)
  • 4.5 in. (1)
  • 4.5000 in (1)
  • 4-13/16 in (1)
  • 4-5/16 in (1)
  • 5.25 (1)
  • 5.500 (1)
  • 6 (1)
  • 6.625 in. (1)
  • 8 (1)
  • Show More...

• Special Features

  

  • "F" female inline splice with washer and nuts; Package: Bulk Pack (1)
  • 1 1/4 To 3IN Mast Size, 2.25IN Lag Bolt (1)
  • 1 Hub Size - 10 SOL - 3/0 STR (1)
  • 1 IN Compression Coupling, Made in USA, Concretetight, Raintight (wet locations) Canada (1)
  • 1.75IN Width X 0.4IN Depth (1)
  • 1/2 Hub Size - 10 SOL - 2/0 STR (1)
  • 1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 10/4, 8/2, 8/3, 1/1 (1)
  • 1-1/2 IN Trade Size Hub, Hole Dia. Min 1.92 IN, Hole Dia. Max 2.02 IN, Panel Thickness Min. 0.06 IN, Panel Thickness Max. 0.25 IN, Insulated Throat (1)
  • 1-1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 1-1/4 IN Trade Size Hub, Hole Dia. Min 1.67 IN, Hole Dia. Max 1.77 IN, Panel Thickness Min. 0.03 IN, Panel Thickness Max. 0.25 IN, Insulated Throat (1)
  • 1-1/4 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 1-13/16 In Diameter X 2-7/16 In Length (1)
  • 12/4, 10/2, 10/3, 2/1 (1)
  • 14/4, 12/3, 6/1, 4/1 (1)
  • 1-7/8 In Diameter X 1-3/8 In Length, Weight 50 Lb per 100 (1)
  • 1-9/16 In Diameter X 1-1/8 In Length, Weight 25 Lb per 100 (1)
  • 2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 2-1/2 IN Trade Size Hub, Hole Dia. Min 2.86 IN, Hole Dia. Max 3.00 IN, Panel Thickness Min. 0.06 IN, Panel Thickness Max. 0.31 IN, Insulated Throat (1)
  • 2-1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 3 In Diameter X 1-11/16 In Length, Weight 10 Lb per 100 (1)
  • 3 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 3-1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 3-5/8" steel studs 1-1/2" or 2-1/8" Boxes (1)
  • 4 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 4 In Width X 1-1/4 In Depth X 2-5/8 In Height (1)
  • 4 Teeth (1)
  • 530-DC Also UL Listed for use with XRWFMC (1)
  • 581-DC UL also listed for use with XRWFMC (1)
  • 6 Holes (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces;Explosionproof, dust-ignitionproof;Smooth, rounded integral bushing in each hub protects conductor insulation;UNF unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Expansion unions compensate for expansion and contraction of conduit;Explosionproof, dust-ignitionproof;Internal phosphor bronze bonding jumper ring assures positive ground between telescoping cylinders;One-piece design eliminates need for disassembly during installation;Small external diameters excellent in restricted areas in wiring of pumps, motors and other equipment;Smooth, rounded integral bushing in each hub protects co (3)
  • Adapts non-metallic conduit to all electrical enclosures by inserting adapter through knockout and cementing into Carlon couplings (1)
  • An insulating coupling with a substantial center shoulder to prevent butting of conduit sections, ensuring a definite break in the metallic path;Dielectric strength of 220 V/MIL;Recommended for use where high strength or resistance to moisture or acid conditions is required;Temperature rating 150 DEG C;Will not melt, soften or burn (5)
  • Anti-Short;Redheads (1)
  • Available in 1/2" through 2" Trade Sizes. For larger trade sizes, use Bridgeport's 266-RT through 269-RT Raintight couplings. (1)
  • Ball Burnished, mirror smooth finish (11)
  • BRACKET,MOUNTING,PLATE 24 (1)
  • Bridgeport Fittings Products are safety listed to ensure code compliance. With our wide selection of fittings, Bridgeport has a connector, coupling or transition fitting to meet your needs. (2)
  • Bridgeport's Raintight Threadless Rigid couplings save time when installing Threadless Rigid conduit in a Wet Location. (1)
  • C-2R Filament (1)
  • Cat 5e Coupler, RJ45 Connector, Keystone Insert (1)
  • Center stop to help determine proper depth of connection (9)
  • Color-Coded Thread Protectors (3)
  • Combination Coupling 1/2 IN Flex Metal Conduit to EMT Conduit, Screw-In Compression (1)
  • Comes with Carriage Bolt and Nut (1)
  • Commercial Grade (1)
  • Compact design;Quick installations;Rain and concrete tight (1)
  • Concrete Tight (25)
  • Concrete tight when taped (2)
  • Concrete Tight, Raintight (2)
  • Concrete Tight, Weight 380 Lb per 100 (1)
  • Concrete Tight/Raintight (2)
  • Concrete Tight;Threadless (13)
  • Concrete Tight;Three Pieces (6)
  • Concretetight (10)
  • Concrete-Tight (54)
  • Concretetight When Taped (7)
  • Concrete-Tight When Taped;Construction: Tubular;Features: Steel Tubular Construction;Master Quantity: 125;Meets UL514B;Shelf Quantity: 25;UL And CUL Listed For EMT, IMC And Rigid Conduit (1)
  • Concrete-tight/Raintight (6)
  • Concrete-Tight;Raintight (61)
  • Corrosion Resistant;Thinner and Lighter Weight Construction (10)
  • dapts non-metallic conduit to all electrical enclosures by inserting adapter through knockout and cementing into Carlon couplings (1)
  • Dual rated CU-AL C-clamp grounding lug (7)
  • Durable Non-Conductive PVC Will Not Rust or Corrode (27)
  • Eliminate Conduit Threading (10)
  • Eliminates Conduit Rattling;Provides a Quick Means of Support for Horizontal Runs of Rigid, EMT, MC/AC or ENT Through Metal Stud;Installs with Screw Gun (1)
  • Excellent Pull Out Strength on HDPE, PVC, FRP and Steel (1)
  • Exclusive molded in mid-point indicator on the piston (3)
  • F type w/one coaxial connector, mar resistant wall plate, fits standard size single gang, nickel plate steel (1)
  • Fabricated (1)
  • Features: Bolts and Nuts Attached (1)
  • Features: Used to Couple Threaded Rod for Extended Lengths (5)
  • Features: Used to Seal Up Holes Punched in Panels or Knockouts from Outlet Boxes (2)
  • For use with Schedule 40 & 80 and EB & DB applications (2)
  • For use with Schedule 40 & 80 and EB & DB conduit (5)
  • For use with Schedule 40 and Schedule 80 conduit (8)
  • Free Fitting Thread Ensure (1)
  • Free Fitting Threads Ensure Easy Assembly (5)
  • Furnished with 2-way Phillips/Slotted Head Screw (8)
  • Galvanized (1)
  • Gangable. When used with conduit, it provides protection against damage and theft of themain ground., Main ground conductor is isolated from communications lines., Incorporates six (6) terminating points (2x the amount required by the NEC)., Eliminates creating holes in building that could allow ingress of water., Mounts to enclosures, conduit bodies, and inline with conduit. (1)
  • GRD ROD COUPLER,SIL BRZ,3/4IN (1)
  • GRD ROD COUPLER,SIL BRZ,5/8IN (1)
  • Grounding Bushings & Accessories (2)
  • Grounding Lug Wire Capacity #6 - #250 MCM (4)
  • HANGER,FIXTURE,FLORESCENTLIGHT 90 DEG (1)
  • Hcf/Hcfmci-A (2)
  • Heavy duty material and zinc plating thickness (2)
  • Heavy duty U-bolts, hex bolts, and hex nuts. Capable of supporting heavy loads. (1)
  • Hexagonal/Splined Body And Locknut Enables Fast And Easy Installation;Corrosion Resistant (1)
  • High impact black thermosetting phenolic bushings, with at 150 DEG C UL temperature rating, that will not soften, melt or burn;O-Z/Gedney also has a plug to be used with metallic or nonmetallic bushings to prevent the entry of dirt or dust;O-Z/Gedney nonmetallic insulating bushings are used to protect wires and cables at entry and exit of threaded rigid conduit and IMC (18)
  • Hole Diameter 3/16" (2)
  • Hubs & Accessories (8)
  • Includes a Terminal Adapter (2)
  • Includes Coupling (1)
  • Includes Lid, Gasket and Screws (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 0.88 In, Material Unpainted Stainless Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 1.06 In, Material Unpainted Stainless Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 1.38 In, Material Unpainted Stainless Steel (1)
  • Insulated throat form provides a more vibration resistant connection between threaded rigid conduit or IMC and enclosure; Provides threaded termination in sheet metal enclosures; Suitable for service entrance; General purpose fitting; Appleton's uni-seal rigid conduit hubs eliminate the need for welded hubs; efficiency of installation is built into the superior design; single wrench installation; Patented hex-hub wedge adapter fits nearly flush against the interior side walls of enclosures; Provides maximu (2)
  • Integral bushings in both ends which prevents damage to wires;Funnel shaped interior to guide the wires from large to small conduit, making it easy to pull wire (1)
  • Killark’s reducing bushings and adapters assist in reducing the trade size of tapped holes and its smooth internal bushing protects conductors. The wide variety of reducing ranges allow for almost any combination of size changes. It is available in copper-free aluminum and zinc plated steel. (10)
  • Large Capacity, Complete line of fittings, Wide range of Datacom connectivity options, UL5 and ADA compliant, UL and cUL Listed (1)
  • Large cross section area, provides ample space for largewiring requirements.Complete line of fittings, provides complete wiring solutionand allows for interconnection between raceway systems. Gray baked enamel and Ivory ScuffCoat finish makes a scratch resistant surface. (1)
  • Liquid Tight;Oil Tight;Rain Tight;Water Tight (9)
  • Liquidtight (13)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (1)
  • Load Capacity 30 Lb, Weight 37 Lb per 100 (1)
  • Low-profile, unobtrusive appearance. Blends with any dTcor or setting. ScuffCoat finish, tough, durable, scratch-resistant can be overpainted with latex paint. Fittings have removable covers which allow easy access to wiring for changes and additions. (1)
  • Made from 6063 alloy with a maximum Copper content of 0.1 PCT (4)
  • Malleable Iron (3)
  • Malleable Iron Body with Steel Ferrule (6)
  • Max load is 1000 lbs (3)
  • Meets NEMA TC-3 Standards (1)
  • Minimum enclosure plate thickness 14 Guage (0.074 inches) (1)
  • Minimum enclosure plate thickness 16 Gauge (0.062 inches) (1)
  • Molded of rugged, indestructible self extinguishing nylon (1)
  • Molded with Center Stop;Sunlight Resistant (12)
  • Molded without Center Stop;Sunlight Resistant (1)
  • Mounts easily on walls, modular furniture, under raisedfloors, or over ceiling, speeds installation: providesflexibility to bring wiring to points of use. Removable cover, provides access to wiring. (3)
  • MULTI-FUNCTION CLIP,WIRE ROD FLNG W/3/4 EMT (1)
  • One Female Threaded End and One Solvent Weld Bell End (2)
  • One Female Union and One Male Threaded End Fitting (2)
  • O-Ring Gasket;Grounding Lug (2)
  • Plain Finish (7)
  • Powergrip Grounding Ring;Built-in Sealing Device;Gland Nut Can be Tightened with Hammer and Screwdriver (1)
  • Press Fit Holds Firmly in Place when Pulling Cable (1)
  • Protects the Electrical Cable from Ground Movement (1)
  • Protects Wiring Which is Being Pulled Through Concrete Vault Walls;Easy Installation (3)
  • provides a concrete tight connection when taped;tri-head screws;zinc electro plated (5)
  • provides a concrete tight connection when taped;UL listed for use with Rigid/IMC conduit;zinc electro plated (2)
  • Provides an economical method of sleeving through (1)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (16)
  • Pulling Eye (1)
  • PUSH IN EMT RAINTIGHT COUPLING (1)
  • PVC repair fittings are listed in accordance with the NEC and Section 352.6 (2)
  • Quick Connect Couplings and Threaded Adapters are Concrete-Tight When Used with Carlon ENT (5)
  • reduces the diameter to the next smaller size (1)
  • Removable aluminum cover to facilitate wire pulling (2)
  • Right Angle (1)
  • Rod Couplings are Used to Couple Threaded Rod for Extended Lengths;Reducing Rod Couplings are Used When Working with Two Different Thread Diameters (1)
  • Rounded Surface of Bushing (10)
  • Rounded surface of bushing prevents damage to wire insulation (1)
  • Rugged metallic construction (1)
  • Rugged metallic construction ensures mechanical protection; May be used in wet or dry locations, indoors or outdoors; Insulated throat, rated up to 150 DEG C, prevents wire abrasion; Integral O-ring provides watertight seal; Unique profile permits easy wrenching; Smooth, accurately tapped threads facilitate installation; Watertight and corrosion resistant; Hole diameter: 1.92 - 2.02 IN; Panel thickness: 0.06 - 1/4 IN; Aluminum bodies and nuts, BUNA-N o-ring (1)
  • Rugged Metallic Construction;Watertight (4)
  • Sealing Ring and Groove with Innovative Profile Better Than Standard O-Ring (10)
  • Sealing Sleeves an All Conduit Openings;Cover Uses Retained Stainless Screw and Wedge Clip Design (1)
  • Sealing Sleeves on All Conduit Openings;Superior Corrosion Protection (2)
  • Sealing Sleeves on Both Ends;Molded External Ribs On 1/2" - 4" to Prevent Tool Damage During Assembly;Couplings are Straight Tapped (5)
  • Set Screw type transition fitting ideal for commercial and institutional facilities. (2)
  • Smooth rounded integral bushing protects conductor insulation (2)
  • Snap-In (3)
  • Snap-In Place Design Eliminates The Need For Solvent Cement (2)
  • Solid rivet through head (1)
  • Split to enable installation without cutting existing wire or cables (1)
  • Stackable for extra deep pours (1)
  • Standard NPT Threads for Easy Installation (1)
  • Standard size plastic smooth wall plate (1)
  • Steel Raceway, Compact low profile design, Full range of fittings, one and two - gang device boxes. (3)
  • Steel raceway, provides superior strength for any dry location. Tough durable ScuffCoat finish makes a scratch-resistant surface that can be painted. (1)
  • Straight Type (1)
  • suitable for EMT/Rigid/IMC (3)
  • Supports frequencies up to 1.5 GHz (1)
  • Tamper-resistant receptacles, Deadfront GFCI protection, Multiple colors available, Compact design, UL5 and ADA compliant, UL and cUL listed raceway (2)
  • Tapered for Easy Installation and Removal (1)
  • Tapered Threaded;Grounding Screw;Water Tight (1)
  • Tapered threads (NPT) and furnished plastic K.O. seal provide "raintight" resistance. (1)
  • Tapered Threads (NPT) and Furnished Plastic KO Seal Provide "Raintight" Resistance (1)
  • Thermoplastic Insulating Throat with Rating up to 105 Degree Celsius (7)
  • Thread Protector Cap (1)
  • Threaded for rigid conduit or IMC. Tapered threads (NPT). Strong and durable construction. (1)
  • Threaded;Grounding Screw;Water Tight (5)
  • Threaded;Grounding;Corrosion Resistant (2)
  • Threadless, Concrete Tight (1)
  • Threadless, Concretetight (5)
  • Three Piece (4)
  • transitions conduit from one trade size to another trade size. (1)
  • Two Device, Weight 42 Lb per 100 (1)
  • Two Female Ends with the Same Diameter (12)
  • Two-Piece Construction with a 8 Inch Maximum Expansion;Internal O-Ring Prevents Leakage (4)
  • Typical use in CATV applications (1)
  • UL Listed Raintight, No disassembly required, Concretetight (3)
  • UL Type 4 Water Tight (6)
  • Unique profile permits easy wrenching. Smooth, accurately tapped threads facilitate installation. Watertight and corrosion resistant. NEMA Types: 2,3,3R,4,4X,12, 13 (3)
  • Use to compensate plus or minus 2" lateral movement of conduit in dry locations (5)
  • Vibration Proof (1)
  • Vibration Proof, Ground Wire Size 4 AWG (CSA), 2/0 AWG (UL), Weight 150 Lb per 100 (1)
  • Vibration Proof, Ground Wire Size 6 AWG (CSA), 1/0 AWG (UL), Weight 125 Lb per 100 (1)
  • Vibration Proof, Ground Wire Size 6 AWG (CSA), 2 AWG (UL), Weight 190 Lb per 100 (1)
  • Vibration Proof, Ground Wire Size 8 AWG (CSA), 4 AWG (UL), Weight 45 Lb per 100 (1)
  • Vibration Proof, Ground Wire Size 8 AWG (UL/CSA), Weight 14 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 100 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 150 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 20 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 30 Lb per 100 (2)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 300 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 43 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 55 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 73 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 80 Lb per 100 (1)
  • Vibration Proof, Posi-Lok Insulated Throat, Weight 95 Lb per 100 (1)
  • Vibration Proof;Posi-Lok Insulated Throat;Grounding Screw (17)
  • Vibrationproof;Chemical Resistance;Water Tight;Dust Tight (5)
  • Weight 110 Lb per 100 (1)
  • Weight 160 Lb per 100 (1)
  • Weight 22 Lb per 100 (1)
  • Weight 30 Lb per 100 (2)
  • Weight 312 Lb per 100 (1)
  • Weight 35 Lb per 100 (1)
  • Weight 46 Lb per 100 (1)
  • Weight 5 Lb per 100 (1)
  • Weight 50 Lb per 100 (2)
  • Weight 6 Lb per 100 (1)
  • Weight 60 Lb per 100 (1)
  • Weight 70 Lb per 100 (1)
  • Weight 75 Lb per 100 (1)
  • Weight 85 Lb per 100 (1)
  • wet or dry locations, pregalvanized finish provides corrosion protection (2)
  • With 14 To 4 AWG Aluminum Grounding Lug (12)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 12 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 24 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 26 Lb per 100 (1)
  • With 14 To 4 AWG Aluminum Lug for Copper/Aluminum Grounding Conductor, Weight 5 Lb per 100 (1)
  • With 6 To 3/0 AWG Aluminum Grounding Lug (1)
  • With 8 To 1/0 AWG Aluminum Grounding Lug (2)
  • With Bolt (5)
  • With Bolt, Weight 6 Lb per 100 (2)
  • With Bridgeport’s newly redesigned Raintight Compression Couplings, 266-RT through 269-RT, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. (2)
  • With Cover, Cover Opening Diameter 3 In (1)
  • With dual rated CU-AL C-clamp grounding lug (1)
  • Without nipple (1)
  • Show More...

• Height

  

  • 0.1 (1)
  • 0.81 (2)
  • 0.83 (1)
  • 0.99 (1)
  • 1 in (1)
  • 1.03 (1)
  • 1.180 in (1)
  • 1.250 in (1)
  • 1.30 in;35.3 mm (1)
  • 1.438 in (1)
  • 1.460 in (1)
  • 1.563 in (1)
  • 1.6 in (1)
  • 1.66 in (1)
  • 1.67 in (1)
  • 1.688 in (2)
  • 1.750 in (1)
  • 1.81 in;45.97 mm (1)
  • 1.85 (1)
  • 1.9 in (1)
  • 1.938 in (1)
  • 1.95 (1)
  • 1/2 in (4)
  • 11 (1)
  • 1-13/16 in (1)
  • 1-15/16 in (1)
  • 1-19/32 in (1)
  • 1-7/8 in (2)
  • 1-9/16 in (1)
  • 2 (6)
  • 2.063 in (2)
  • 2.07 (1)
  • 2.08 (1)
  • 2.125 in (1)
  • 2.13 (1)
  • 2.16 (1)
  • 2.188 in (2)
  • 2.2 (1)
  • 2.25 in (1)
  • 2.35 in (1)
  • 2.375 in (2)
  • 2.44 in (1)
  • 2.600 in (1)
  • 2.67 in (1)
  • 2.875 in (1)
  • 2-23/32 in (1)
  • 23.6 (1)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3.000 (1)
  • 3.000 in (1)
  • 3.188 in (1)
  • 3.438 in (1)
  • 3.563 in (1)
  • 3.813 in (1)
  • 3/4 in (3)
  • 3/8 in (2)
  • 4 (1)
  • 4.5 (1)
  • 4.5 in (1)
  • 5/8 in (1)
  • 6 (1)
  • 8 (1)
  • Show More...

• Hub Size

  

  • 1 in (8)
  • 1 INCH (24)
  • 1" to 3/4" (1)
  • 1.56 in (1)
  • 1.81 in (1)
  • 1/2 in (7)
  • 1/2 INCH (19)
  • 1/2 to 3/4 in (1)
  • 1-1/2 in (4)
  • 1-1/2 INCH (16)
  • 1-1/2" (1)
  • 1-1/2" to 1" (1)
  • 1-1/2" to 1/2" (1)
  • 1-1/2" to 3/4" (1)
  • 1-1/4 in (5)
  • 1-1/4 INCH (9)
  • 1-1/4" to 1" (1)
  • 1-1/4" to 1/2" (1)
  • 2 in (6)
  • 2 INCH (19)
  • 2" to 1" (1)
  • 2" to 1/2" (1)
  • 2" to 1-1/2" (1)
  • 2.13 in (1)
  • 2/3 in (1)
  • 2-1/2 in (3)
  • 3 in (4)
  • 3 INCH (4)
  • 3.38 in (1)
  • 3/4 in (13)
  • 3/4 INCH (25)
  • 3/4" (1)
  • 3/4" to 1/2" (1)
  • 3-1/2 in (1)
  • 4 in (4)
  • 4 INCH (2)
  • 4.50 in (1)
  • 5.75 in (1)
  • Show More...

• Thickness

  

  • .35 (1)
  • .40 (1)
  • .875 (1)
  • .98 (1)
  • 0.89 in (1)
  • 1.125 in (1)
  • 1.13 in (2)
  • 1.26 in (1)
  • 1/16" (16 Gauge) (2)
  • Show More...

• Includes

  

  • Set Screw (10)
  • Terminal Adapter (1)
  • Show More...

• Package Quantity

  

  • 1 ct (19)
  • 1 CT;10 PK (3)
  • 1 CT;12 PK (2)
  • 1 CT;25 PK (2)
  • 1 CT;4 Pk (1)
  • 1 CT;40 PK (1)
  • 1 CT;50 Pk (2)
  • 1 CT;6 Pk (1)
  • 1 CT;8 PK (2)
  • 1 PK (5)
  • 1 PK;10 CT (1)
  • 1 PK;2 CT (1)
  • 1 PK;20 CT (2)
  • 1 PK;25 CT (1)
  • 1 PK;5 CT (3)
  • 10 CT (24)
  • 10 CT;100 PK (3)
  • 10 CT;1000 PK (1)
  • 10 CT;60 PK (2)
  • 10 PK (15)
  • 10 PK;1 CT (9)
  • 10 PK;12 CT (1)
  • 10 PK;2 CT (5)
  • 100 CT (3)
  • 100 JR (2)
  • 100 PK (7)
  • 100 PK;1 CT (5)
  • 100 PK;10 CT (3)
  • 100 PK;25 CT (4)
  • 1000 PK;100 CT (1)
  • 12 CT (6)
  • 12 PK;1 CT (2)
  • 125 CT (3)
  • 125 PK;25 CT (4)
  • 15 CT (1)
  • 15 CT;19 PK (1)
  • 15 PK (1)
  • 15 PK;1 CT (2)
  • 150 PK (1)
  • 150 PK;15 CT (1)
  • 16 CT (1)
  • 2 CT (4)
  • 2 PK (10)
  • 2 PK (Inner);20 PK (Outer) (1)
  • 2 PK;1 CT (1)
  • 20 CT (10)
  • 20 CT;100 PK (1)
  • 20 PK (3)
  • 20 PK;1 CT (3)
  • 200 CT (3)
  • 200 PK;1 CT (2)
  • 200 PK;20 CT (3)
  • 200 PK;25 CT (1)
  • 25 CT (37)
  • 25 CT;125 PK (1)
  • 25 CT;250 PK (4)
  • 25 PC/BG;1000 PC/CA (1)
  • 25 PK (16)
  • 25 PK (Inner);100 PK (Outer) (3)
  • 25 PK (Inner);50 PK (Outer) (2)
  • 25 PK;1 CT (12)
  • 25 PK;125 CT (2)
  • 25 PK;5 CT (2)
  • 250 PK;25 CT (3)
  • 250 PK;50 CT (3)
  • 30 CT (8)
  • 40 CT (10)
  • 40 PK;10 CT (1)
  • 5 CT (11)
  • 5 CT;25 PK (1)
  • 5 CT;30 PK (1)
  • 5 PK (12)
  • 5 PK (Inner);25 PK (Outer) (3)
  • 50 CT (17)
  • 50 CT;1 PK (1)
  • 50 CT;250 PK (1)
  • 50 CT;500 PK (2)
  • 50 JR (1)
  • 50 PK (2)
  • 50 PK;1 CT (4)
  • 50 PK;10 CT (3)
  • 50 PK;500 CT (1)
  • 500 PK;50 CT (3)
  • 6 CT (1)
  • 6 PK (3)
  • 6 PK;1 CT (3)
  • 70 CT (4)
  • 7000 PK;50 CT (1)
  • 8 CT (3)
  • 900 PK;10 CT (1)
  • Show More...

• Application

  

  • 2 X 4 in Metal Stud (1)
  • A Fitting for Connecting a Junction Box to a Conduit System (7)
  • Adapts Non-Metallic Conduit to All Electrical Enclosures by Inserting Adapter Through Knockout and Cementing into Carlon Couplings (1)
  • All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement (2)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (1)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (4)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (2)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (1)
  • Beam Clamp (3)
  • box adapter (2)
  • Bridgeport Fittings Mighty-Seal® product line is designed to provide quick and easy raintight connection to EMT raceways. Patented (2)
  • Bridgeport now offers a full line of EMT to FMC/Greenfield Transition Couplings. You no longer need to assemble multiple fittings, or mount a box, to transition between raceways. These couplings provide dimensional flexibility for a raceway system when dropping in to switchgear and transitioning into transformers. Patented (3)
  • Commercial (27)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (112)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherData Intensive Industries and Information Technologies - Communications and Telecom (2)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsInd Facilities & Factories - Facility: Critical PowerInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Mfg. Process Electrification and ControlInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Facility: Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsCommercial / Institutio (1)
  • Commercial;Industrial;Dry Location (2)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (16)
  • Commercial;Non-Hazardous Location (8)
  • Commercial;Video, Data and Telephony Applications (1)
  • Compensate for Length Changes Due to Temperature Variations in Exposed Conduit Runs (4)
  • Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Patented (1)
  • Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Patented (5)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (3)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (2)
  • Compression type steel couplings used to join two lengths of EMT. Concrete Tight. (1)
  • Concretetight or Dry Location (1)
  • Conduit Body Used for Change of Direction of Conduit Run (1)
  • Connects Two Different Sizes of Conduit Together or is Used to Replace a Coupling and Reducer in an Installation (1)
  • Connects two lengths of EMT conduit (1)
  • Corrosion Protection for Electrical Systems (4)
  • Damp Location (3)
  • Designed to compensate for length changes due to temperature variations in exposed conduit runs (3)
  • Designed to secure rigid metal conduit, IMC or EMT across, parallel or perpendicular to channel, beam, and angle supports. (1)
  • Education,Hospitality,Offices & Banks (1)
  • Electrical (10)
  • Electrical Box (1)
  • Electrical Fixing and Fastening; Acoustical, Ceiling and Partitioning (1)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (3)
  • Electrical Service Entrance (1)
  • Electrical Service Entrance where Underground Service Emerges to Connect to the Meter (2)
  • EMT Raceway;Wet Locations (7)
  • End Cap (5)
  • Entry Point for Overhead Power and Communication Wires into a Building;Indoor/Outdoor Use (6)
  • Female Reducer to Connect Two Different Sizes of Rigid/IMC Conduit (1)
  • For AC - MCI-A - HCF steel and aluminum cable (3)
  • For Connecting Conduit To Conduit (1)
  • For Connecting Conduit To Enclosure (3)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1" Rigid Conduit (GRC & IMC) and 1" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1/2" Rigid Conduit (GRC & IMC) and 1/2" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1-1/2" Rigid Conduit (GRC & IMC) and 1-1/2" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1-1/4" Rigid Conduit (GRC & IMC) and 1-1/4" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 2" Rigid Conduit (GRC & IMC) and 2" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 3/4" Rigid Conduit (GRC & IMC) and 3/4" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For EMT Conduit (1)
  • For EMT To Flexible Metal Conduit (2)
  • For Joining Lengths Of Steel EMT To Rigid Metal Conduit Or IMC (6)
  • For Joining Lengths Of Steel EMT To Various Raceway Systems (1)
  • For Lay-In Wireway (3)
  • For Reducing Conduit Entries To A Smaller Size In Threaded Rigid And IMC Conduit Systems (2)
  • For repairing broken PVC conduit a.k.a stub-ups in concrete slabs (2)
  • For Rigid And EMT Conduit (1)
  • For Rigid Conduit And IMC (5)
  • For Threaded Rigid Conduit And IMC (18)
  • For two or three parts 613 or 617 porcelain wire holders (1)
  • For use in wet or dry locations to support runs of rigid/IMC and EMT conduit from ceilings and walls (2)
  • For Use To Connect Rigid Metal Conduit Or IMC To A Threadless Opening In An Enclosure (3)
  • For Use To Secure And Terminate Steel EMT To Knockouts And Concrete Tight Box (5)
  • For use with conduit (1)
  • For use with EMT conduit (20)
  • For use with Rigid Conduit (1)
  • For use with rigid/IMC conduit (18)
  • For Use with Rigid/IMC Conduits (10)
  • For Used To Couple Threaded Rod For Extended Lengths (3)
  • For Used To Seal Up Holes Punched In Panels Or Knockouts From Outlet Boxes (2)
  • Grounding and Bonding (2)
  • Grounding Wire (2)
  • Hazardous Location (6)
  • Hazardous Locations (3)
  • In Hazardous Areas Where a Flexible Member is Required in a Conduit System (2)
  • Ind Facilities & Factories - Facility: Automation and MonitoringCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility: Lighting and Lighting ControlsInd Facilities & Factories - Industrial Facilities/Factories - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsUtility - Substations, Utility Trans (1)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (19)
  • INSTALLED INDOORS OR OUTDOORS, EXPOSED OR CONSEALED (3)
  • Join EMT to flexible metal conduit. 282-DC is squeezetype for flexible metal conduit. Set screw type for EMT end (1)
  • Join EZ Flex Electrical Nonmetallic Tubing to ENT box or fitting (2)
  • Join Lengths of Conduit Pipe Together with two Solvent Weld Socket End (13)
  • Join Two Lengths of Threaded Conduit;Couples Conduit when Conduit Cannot be Turned (6)
  • Knockout (4)
  • Male Terminal Adapter (2)
  • Mast Support (1)
  • Mechanical Damage and Corrosive Attack;Electrical Continuity is Maintained Across Assemble (1)
  • meter riser w/attached terminal adapter (1)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupl (1)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Tighten all set screws. Patented (1)
  • Miniature Lamp (1)
  • New work and Retrofit (1)
  • New Work in Poured Concrete;Maintenance, Repairs and Alterations;Connections at Panels and Boxes;New Altered or Damaged Stub-Ups;Applicable Locations Where Field Threading is Impractical or Undesirable (13)
  • Offered in Numerous Configurations for 90 Degree Bends;Taps or Splices or Mounting Outlets (3)
  • One hole strap for steel or Aluminum Tubing or Coaxial cable. (2)
  • Passing Jacketed Metal Clad Cables Through a Bulkhead or enclosure in Industrial Hazardous Location (1)
  • Permits removal of equipment without turning or removal of conduit. (1)
  • Petrochemical Refining and Processing (1)
  • Pharmaceutical;Chemical;Food Processing;Pulp/Paper and Nuclear Industries (17)
  • Physical Protection of Conductors and Long Service Life of the Installation (10)
  • Poly Plug w/ Pulling Eye (1)
  • Polyethylene "Redheads" prevent damage to wire installation when placed between the wire and armored sheath. Rated 90 degree C. (3)
  • Polyethylene Redheads Prevent Damage to Wire Installation when Placed Between the Wire and Armored Sheath. Rated 90 Degree C (1)
  • Protects Wiring Which is Being Pulled Through Concrete Vault Wall (3)
  • Provides a dependable method for grounding and bonding for electrical systems (1)
  • Provides a streamlined connection point (1)
  • Provides a transition from EMT to flexible metal conduit (1)
  • Provides a Well Rounded Insulating Surface Over Which Conductors May Be Pulled or on Which Conductors May Bear While In Service (3)
  • Provides threaded coupling between lengths of conduit and IMC elbows, where neither can be rotated (8)
  • Provides Threaded Coupling Between Lengths of Rigid Conduit and IMC Conduit Elbows, Where Neither Can Be Rotated (2)
  • Recommended cable types 14/2 to 10/2 with cable range O.D. Steel or Aluminum .38 to .59 AC/MC/MCIA and Steel or Aluminum 3/8" FMC. Simply snap cables into connector and snap assembly into electrical box. No tools required! Integral internal spring steel locking tabs fasten cable or conduit. External spring steel locking tabs secures connector to electrical box. Suitable for maintaining grounding continuity when installed in accordance with the NEC. (1)
  • Recommended cable types used to secure Steel or Aluminum Flexible Metal Conduit or Armored, Metal Clad Cable to box or enclosure. Diameter for .70 - .855. 8/3 - 6/3 AC/MC/MCI-A (1)
  • Reduce strain and sagging of overhead type ACSR Service Entrance Cable. Max load is 1000 lbs. (3)
  • Reducer Bushing (1)
  • Reduces from One Diameter to the Next Small Conduit Diameter (1)
  • Residential (1)
  • Residential/Commercial (3)
  • Schedule 40 Bell to Bell Swedged Reducer (1)
  • Schedule 40 Long Line Coupling with no Center Stop (6)
  • Schedule 40 Long Line Center Stop Coupling (2)
  • Schedule 40 Longline Swedged Coupling with Center Stop (1)
  • Schedule 40 Split Sleeve Coupling (1)
  • Schedule 40 Standard Center Stop Coupling (9)
  • Serves as a short raceway between enclosures when used with a locknut. (1)
  • Set screw type couplings used to join EMT to flexible metal conduit. (2)
  • Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. (3)
  • Suitable for damp locations (3)
  • Support FS Box and Outdoor Lighting Fixture or Similar Devices, per NEC Article 370-23 (1)
  • Surface Raceway Products Provide Maximum Flexibility for Routing, Protecting, and Concealing High-Performance Copper, Voice, Video, Fiber Optic, and Electrical Wiring within any Enterprise Environment to Provide an Innovative and Satisfying Office Environ (1)
  • Terminate Conduit Runs Through The Wall of a Sheet Metal Electrical Enclosure (2)
  • The 260-MB is used to couple two properly deburred lengths of 1/2" EMT raceway. Simply push the fitting on to the raceway with a slight twist. Remove the fitting by unthreading it from the conduit end. No tools are required. Dry Locations Only. Concrete Tight. Patented (1)
  • The 261-MB is used to couple two properly deburred lengths of 3/4" EMT raceway. Simply push the fitting on a raceway with a slight twist. Remove the fitting by unthreading it from the conduit end. No tools are required. Dry Locations Only. Concrete Tight. Patented (1)
  • The 3000-RT Series are compression type connectors used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (2)
  • The 3100-RT Series are compression type couplings used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (1)
  • The 3100-RT Series are compression type couplings used to join unthreaded steel rigid conduit to box or enclosure in a wet location. Available in 1/2" through 2" Trade Sizes. For larger trade sizes, use Bridgeport's 266-RT through 269-RT Raintight couplings. (1)
  • The 4357-DC is used to securely join 1" EMT to three (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti short bushings (1)
  • The 4457-DC is used to securely join 1" EMT to four 14/2 to 10/3 (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti sh (1)
  • The Bell End of a Conduit to Reduces from One Diameter to The Next Small Conduit Diameter (6)
  • The holding of wires (1)
  • The Temporary Sealing of Conduit to Protect the Duct trom the Effects of Weather. Job Site Debris and Animal Damage (1)
  • These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. This marking helps the AHJ to precisely confirm the products intended use. Patented (1)
  • These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. This marking helps the AHJ to precisely confirm the products intended use. Patented (1)
  • Threaded Heavy Wall Conduit Systems (1)
  • Through a Hole in a Juction Box Wall to Accept a Female Fitting Outside the Box (5)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box or Enclosure, or to Couple Ends of Threadless Conduit (6)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box/Enclosure or to Couple Ends of Threadless Conduit (4)
  • To Connect Threaded Metal Conduit to a Threadless Opening in a Box or Enclosure (10)
  • To connect threaded stainless conduit to a threadless opening in a box or enclosure in an outdoor or indoor location. To positively bond conduit to a box or enclosure. (3)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Roated (13)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Rotated (2)
  • To Couple and Effectively Bond Threaded Ends of Rigid MetalConduit/Intermediate Conduit Where Neither Length of Conduit Can Be Roated (1)
  • To ground and secure EMT raceway sections together in wet locations (7)
  • To ground and secure EMT Raceways sections together (7)
  • TO JOIN AND CONNCET THREADED ENDS OF STAINLESS CONDUIT WHERE NEITHER LENGTH OF CONDUIT CAN BE TURNED (1)
  • To join lengths of steel EMT for concretetight, dry or damp locations (1)
  • To positively bond conduit to box or enclosure (1)
  • To reduce the trade size of a taped hole or hub. (10)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertight. Suitable for Aluminum and Steel Rigid Conduit (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertightnants from entering enclosure. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed. Suitable for Aluminium and Steel Rigid Conduit (1)
  • Transition from a Spigot End PVC Conduit to a Threaded Metal or PVC Plastic Female Bell End (10)
  • Transition Threaded Metal or PVC Conduit with One End Threaded and the other End Socket Solvent Weld (12)
  • Under-Ground Electrical (1)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (1)
  • Use With PVC Conduit and Utility Duct (1)
  • use with stainless steel rigid conduit, and to connect threaded stainless conduit, nipples, and other threaded fittings (2)
  • Used as a short raceway between two boxes. (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed. Patented (4)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed (3)
  • Used inside bushing to prevent foreign matter from entering conduit Galvanized steel. (2)
  • Used inside bushing to prevent foreign matter from entering conduit. Galvanized steel. (1)
  • Used to bond one continuous length of grounding conductor to an enclosure thru a 1/2" trade size knockout, inside or outside of an enclosure or panel board and provides 3-equipment bonding terminations. Meets the requirement for Intersystem Bonding. Patented (1)
  • Used to bond one continuous length of grounding conductor to an enclosure thru a 3/4" trade size knockout, inside or outside of an enclosure or panel board and provides 3-equipment bonding terminations. Meets the requirement for Intersystem Bonding. Patented (1)
  • Used to Compensate for Centerline Differences (2)
  • Used to connect rigid metal conduit or IMC to a threqadless opening in an enclosure. (3)
  • Used to Connect Rigid or IMC Conduit to a Threadless Opening in an Enclosure (9)
  • Used to connect two lengths of EMT to form a 90degree bend. Removable Aluminum cover to facilitate wire pulling. (2)
  • Used to fasten threaded Rigid or IMC Conduit to box or enclosure. (2)
  • Used to join 1/2" EMT and up to two 14/2 and 12/2 Romex, Non-Metallic Cables. Two screw strap type for cable and a set screw type for EMT. (1)
  • Used to join 2 lengths of EMT. Concrete/Raintight. Patented (1)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT, Raintight. Concrete-Tight. Patented (4)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT. Raintight. Concrete-Tight. (2)
  • Used to join EMT to flexible metal conduit. 281-DC is squeeze type for flexible metal conduit. Set screw type for EMT end. (1)
  • Used to Join Emt to Flexible Metal Conduit. Screw-In Type For Flex. Compression Type For EMT (3)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete/Raintight. Patented (3)
  • Used to join two lengths of EMT. 1/2" through 1 1/4" Concrete-tight, 1 1/2" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with aluminum or steel EMT. (10)
  • Used to join two lengths of EMT. Concrete tight when taped. (6)
  • Used to join two lengths of EMT. Concrete-tight. (10)
  • Used to join two lengths of EMT. Concrete-tight/Raintight. Patented (6)
  • Used to join two lengths of flexible metal conduit. (3)
  • Used to join two lengths of Steel EMT. Concrete-tight 2" thru 4" suitable for steel and aluminum EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (1)
  • Used to join two lengths of threaded conduit. (7)
  • Used to secure and hang conduit (1)
  • Used to secure conduit perpendicular to beam or channel. (1)
  • Used to secure two lengths of steel EMT. (6)
  • Used to support FS box, outdoor lighting fixture, or similar devices, per NEC article 370-23. (1)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. Grounding lug; aluminum alloy 6061-T6. Plastic metaliner prevents damage to wire insulation. Rated 150 degree C. (4)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (11)
  • Wet Location (9)
  • Wet/Dry Locations;Indoor/Out;Hazardous Locations (1)
  • When one-piece quick connect snap-in terminator adapters are installed in a concrete application, Carlons flat sealing washers must be used on the box connection ends (3)
  • Wire protection (2)
  • Show More...

• Weight

  

  • 0.0005 lb/EA (1)
  • 0.0007 lb/EA (2)
  • 0.001 lb/EA (1)
  • 0.004 lb/EA (1)
  • 0.005 lb/EA (1)
  • 0.0068 lb/EA (1)
  • 0.01 lb/EA (2)
  • 0.015 lb/EA (1)
  • 0.0167 lb/EA (1)
  • 0.0183 lb/EA (1)
  • 0.02 lb/EA (1)
  • 0.0204 lb/EA (1)
  • 0.0282 lb/EA (1)
  • 0.0290 lb/EA (1)
  • 0.04 lb/EA (1)
  • 0.0475 lb/EA (1)
  • 0.05 lb (1)
  • 0.05 lb/EA (1)
  • 0.0500 lb/EA (1)
  • 0.06 lb/EA (1)
  • 0.07 lb/EA (1)
  • 0.0700 lb/EA (1)
  • 0.075 lb/EA (2)
  • 0.078 lb/EA (1)
  • 0.08 lb/EA (4)
  • 0.0800 lb/EA (1)
  • 0.0839 lb/EA (1)
  • 0.084 (1)
  • 0.09 lb/EA (3)
  • 0.094 lb/EA (1)
  • 0.0980 lb/EA (2)
  • 0.1 lb/EA (2)
  • 0.1000 lb/EA (1)
  • 0.11 lb/EA (2)
  • 0.1110 lb/EA (1)
  • 0.12 lb/EA (4)
  • 0.1210 lb/EA (1)
  • 0.13 lb/EA (1)
  • 0.14 lb/EA (4)
  • 0.15 lb/EA (1)
  • 0.152 lb/EA (1)
  • 0.16 (1)
  • 0.16 lb/EA (2)
  • 0.17 lb/EA (1)
  • 0.1700 lb/EA (2)
  • 0.18 lb/EA (3)
  • 0.19 (1)
  • 0.19 lb/EA (1)
  • 0.193 lb/EA (1)
  • 0.2 (1)
  • 0.2 lb (1)
  • 0.2 lb/EA (1)
  • 0.21 lb/EA (2)
  • 0.22 lb/EA (1)
  • 0.229 lb/EA (1)
  • 0.25 lb/EA (3)
  • 0.26 (1)
  • 0.26 lb/EA (1)
  • 0.2689 lb/EA (1)
  • 0.27 lb/EA (1)
  • 0.2700 lb/EA (1)
  • 0.29 lb/EA (2)
  • 0.3 (1)
  • 0.3 lb/EA (2)
  • 0.30 lb/EA (1)
  • 0.30 lb;0.14 kg (1)
  • 0.304 lb/EA (1)
  • 0.31 (1)
  • 0.33 lb/100 (1)
  • 0.35 lb (1)
  • 0.35 lb/EA (2)
  • 0.355 lb/EA (1)
  • 0.36 lb/EA (1)
  • 0.38 lb (1)
  • 0.38 lb/EA (4)
  • 0.39 lb/EA (1)
  • 0.4 lb/EA (3)
  • 0.42 lb/EA (1)
  • 0.4217 lb/EA (1)
  • 0.43 lb/EA (2)
  • 0.44 lb/EA (1)
  • 0.4400 lb/EA (1)
  • 0.46 lb/EA (1)
  • 0.48 (1)
  • 0.48 lb/EA (1)
  • 0.49 lb/EA (1)
  • 0.4900 lb/EA (1)
  • 0.5 lb/EA (1)
  • 0.51 lb/EA (1)
  • 0.52 lb/EA (1)
  • 0.5270 lb/EA (1)
  • 0.53 lb/EA (1)
  • 0.55 lb/EA (3)
  • 0.5500 lb/EA (1)
  • 0.56 lb/EA (1)
  • 0.5717 lb/EA (2)
  • 0.6 (1)
  • 0.6 lb/EA (1)
  • 0.63 lb/100 (1)
  • 0.68 lb/EA (1)
  • 0.7 lb (1)
  • 0.7 lb/EA (1)
  • 0.71 lb/EA (1)
  • 0.73 lb/EA (1)
  • 0.78 (1)
  • 0.82 (1)
  • 0.86 (1)
  • 0.89 lb/EA (1)
  • 0.93 lb/EA (1)
  • 0.94 lb/EA (1)
  • 0.98 (1)
  • 1.02 lb/100 (1)
  • 1.05 lb/EA (1)
  • 1.06 lb/ft;0.48 kg/ft (1)
  • 1.09 lb/100 ft (1)
  • 1.15 (1)
  • 1.17 (1)
  • 1.25 lb/EA (1)
  • 1.4 lb/EA (1)
  • 1.5 (1)
  • 1.50 (1)
  • 1.61 (1)
  • 1.63 lb/EA (1)
  • 1.80 lb (1)
  • 1.86 lb/EA (1)
  • 1.87 lb/EA (1)
  • 1.88 lb/EA (2)
  • 1.9 lb/EA (1)
  • 1.92 lb/100 (1)
  • 10.08 (1)
  • 104.00 lb;47.17 kg (1)
  • 110.2 lb/100 (1)
  • 113 lb/100 (2)
  • 118 lb/100 (1)
  • 12 lb/100 (1)
  • 121.3 lb/100 (1)
  • 124 lb/100 (1)
  • 13/100 lb/EA (1)
  • 135 lb/100 (1)
  • 14 lb/100 (1)
  • 142.3 lb/EA (1)
  • 149.00 lb;67.59 kg (1)
  • 151 lb/100 (1)
  • 156 lb/100 (1)
  • 16 lb/100 (1)
  • 16.81 lb/100 (1)
  • 162 lb/100 (1)
  • 167 lb/100 (1)
  • 176.4 lb/100 (2)
  • 179 lb/100 (1)
  • 18 lb/100 (1)
  • 180 lb/100 (1)
  • 1801 lb/100 (1)
  • 189 lb/100 (1)
  • 19 lb/100 (1)
  • 19.00 lb;8.62 kg (1)
  • 19.5 lb/100 (1)
  • 193 lb/100 (1)
  • 2 lb (1)
  • 2.1 lb (1)
  • 2.11 lb (1)
  • 2.11 lb/EA (1)
  • 2.16 lb/EA (1)
  • 2.18 lb/EA (1)
  • 2.25 lb/EA (1)
  • 2.27 (1)
  • 2.35 (1)
  • 2.39 lb/100 (1)
  • 2.45 lb/EA (4)
  • 2.48 lb/EA (1)
  • 2.5 lb (1)
  • 2.5 lb/100 (1)
  • 2.5 lb/EA (1)
  • 2.6 lb/EA (1)
  • 2.65 lb/EA (1)
  • 2.77 (1)
  • 2.95 lb/EA (1)
  • 20 lb/100 (1)
  • 20.63 lb/100 (1)
  • 21 lb/EA (1)
  • 215 lb/100 (1)
  • 217 lb/100 (1)
  • 221 lb/100 (1)
  • 229 lb/100 (1)
  • 23 lb/100 (1)
  • 23.5 lb/100 (1)
  • 243 lb/100 (1)
  • 25 lb/100 (1)
  • 25.00 lb;11.34 kg (1)
  • 25.88 lb/100 (1)
  • 27.1 lb/100 (1)
  • 28.9 lb/100 (1)
  • 286 lb/100 (1)
  • 29.63 lb/100 (1)
  • 3.3 lb/EA (2)
  • 3.35 lb/EA (1)
  • 3.5 lb/EA (2)
  • 3.50 (1)
  • 3.65 lb/100 (1)
  • 3.73 (1)
  • 3.799 lb/EA (1)
  • 31 lb/100 (1)
  • 313 lb/100 (1)
  • 3166 lb/100 (1)
  • 35 lb/100 (1)
  • 350.00 lb;158.76 kg (1)
  • 38 lb/100 (1)
  • 39 lb;17.69 kg (1)
  • 39.00 lb;17.69 kg (1)
  • 39.7 lb/100 (1)
  • 391 lb/100 (1)
  • 4.04 lb/EA (1)
  • 40 lb/100 (2)
  • 411 lb/100 (1)
  • 42 lb/100 (1)
  • 44.1 lb/100 (2)
  • 456.4 lb/100 (1)
  • 46 lb/100 (1)
  • 463 lb/100 (1)
  • 48 lb/100 (1)
  • 5 lb/EA (1)
  • 50 lb/100 (2)
  • 56.5 lb/100 (1)
  • 59 lb/100 (1)
  • 6 (1)
  • 6 lb/100 (1)
  • 60 lb/100 (1)
  • 60/100 lb/EA (1)
  • 63.5 lb/100 (1)
  • 635 lb/100 (1)
  • 64 lb/100 (1)
  • 69 lb/100 (1)
  • 7.27 (1)
  • 70 lb/100 (1)
  • 70.5 lb/100 (1)
  • 71 lb/100 (1)
  • 720 lb/100 (1)
  • 74.5 lb/100 (1)
  • 75 lb/100 (1)
  • 8/100 lb/EA (1)
  • 85 lb/100 (3)
  • 859.8 lb/100 (1)
  • 86 lb/100 (1)
  • 87 lb/100 (1)
  • 88.00 lb;39.92 kg (1)
  • 9/100 lb/EA (1)
  • 91 lb/100 (1)
  • 93 lb/100 (1)
  • 96.1 lb/100 (1)
  • 97.3 lb/EA (1)
  • Show More...

• Sub Brand

  

  • CADDY (3)
  • Carlon (2)
  • Crouse-Hinds series (1)
  • Erickson(R) (1)
  • ERICO (2)
  • Korns(R) (4)
  • Liquidator(TM) (16)
  • Myers(TM) (8)
  • Myers(TM), Scru-tite(R) (9)
  • Neer(TM) (8)
  • Ocal (1)
  • Pentair (1)
  • Phoenix (13)
  • Star Teck(R) (1)
  • Steel City(R) (2)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 2 Group A B, Class II Div 1 Group E F G, Class II Div 2 Group F G, Class III (1)
  • Class I Div 1 Group A B C D, Class II Div I Group E F G, Class III (2)
  • Class I Div 2, Class II Div 1 and 2, Class III (2)
  • Class I Div 2, Class II Div 1 and 2, Class III Div 1 and 2 (10)
  • Class I Div 2;Class II Div 1 and 2;Class III Div 1 and 2;Class I Zone 1 Aex E II;Class I Zone 1 Ex E II;NEMA 2;NEMA 3;NEMA 3R;NEMA 4;NEMA 4X;NEMA 12 (3)
  • Group F G, Class III (1)
  • NEMA 2/3/3R/4/4X/12 (17)
  • NEMA 2/3/3R/4/4X/5/12/13;NEMA FB-1 (4)
  • NEMA 2;NEMA 3;NEMA 3R;NEMA 4;NEMA 4X;NEMA 12 (2)
  • NEMA FB-1 (1)
  • Stainless Steel (1)
  • Steel (3)
  • Show More...

• Manufacturer Status

  

  • Inactive (2)
  • Non-Stock (286)
  • Show More...

• Category Description

  

  • ADHESIVES (1)
  • ALL PLASTIBOND FITTINGS (168)
  • All Recessed Cans & Trims (1)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (15)
  • CABLE & PIPE TRANSITS (1)
  • COAX CABLE (1)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (407)
  • Datacom Wiring Devices and Accessories (3)
  • DIECAST EMT FITTINGS (63)
  • EMT ELBOWS (22)
  • EMT STRAPS (2)
  • FASTENERS (9)
  • FLEX & MC FITTINGS (21)
  • FORM 5 CONDULETS, COVERS, & GASKETS (8)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (2)
  • Fuses & Fuse Accessories (127)
  • HALOGEN (1)
  • HAND TOOLS (1)
  • HAZARDOUS LOCATION FITTINGS (23)
  • HVACR Copper Tubing & Copper Fittings (15)
  • HVACR Install Accessories: Screws, Duct Ties, Duct Sealer, Duct Tapes, PVC... (8)
  • HVACR Tools (1)
  • Industrial cord connectors (1)
  • INDUSTRIAL TUBING AND FITTINGS (2)
  • Job Site & Safety Apparel (1)
  • LED FLOODLIGHTS, WALLPACKS, BOLLARDS & LANDSCAPE LIGHTING (1)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (13)
  • METALLIC FITTINGS (46)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (14)
  • PVC ELBOWS (2)
  • PVC SPACERS (15)
  • Residential plates (3)
  • RIGID COUPLINGS (73)
  • RIGID ELBOWS (36)
  • RIGID NIPPLES (122)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (7)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (5)
  • Stainless Rigid Conduit (9)
  • Stainless Steel EMT Conduit (5)
  • STEEL EMT FITTINGS (179)
  • STEEL WIRE WAY JUNCTION BOXES (5)
  • TERMINALS (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (249)
  • Wire/Plug Strips, Surf Raceways, Power Pole, Walkerduct, & Plugmolds (2)
  • Show More...

• Used On

  

  • Conduit Hub (1)
  • EMT CONDUIT (1)
  • Liquid Tight Conduit (3)
  • Liquidtight Conduit (7)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (15)
  • RIGID CONDUIT (202)
  • RIGID METAL CONDUIT (7)
  • Threaded PVC Coated Rigid Conduit (4)
  • Show More...

• Installation

  

  • 90 Degree (1)
  • SCREW (83)
  • THREADED (4)
  • Show More...

• Form Type

  

  • FORM 7 (41)
  • FORM 8 (43)
  • MOGUL (4)
  • Show More...

• Number Of Hubs

  

  • 1 (9)
  • 2 (78)
  • 3 (1)
  • 3 IN (29)
  • 4 (3)
  • Show More...

• Cover Type

  

  • Coupler (1)
  • PVC Coated (89)
  • RED URETHANE 2 MIL COATED INTERIOR, GRAY PVC 40 MIL COATED EXTERIOR (ALUMINUM), SCREW ON (1)
  • SCREW (3)
  • Show More...

• Access Opening

  

  • 45 Degree Back (4)
  • BACK (34)
  • CROSS SIDE (1)
  • LEFT SIDE (12)
  • RIGHT SIDE (11)
  • SIDE (28)
  • Show More...

• Applicable Standard

  

  • ANSI C80.1 (40)
  • ANSI C80.1, Federal Specification WW-C-563 (3)
  • ANSI C80.1, NEMA (51)
  • ANSI C80.1, NEMA RN-1 (2)
  • ANSI C80.3 (20)
  • ANSI C80.5 (6)
  • ANSI C80.5, NEMA (2)
  • ISO 9001 (7)
  • NEMA TC-3 (1)
  • Show More...

• Configuration

  

  • C (11)
  • LB (23)
  • LBD (3)
  • LL (12)
  • LR (11)
  • T (17)
  • TB (8)
  • UB (5)
  • X (1)
  • Show More...

• Connector Type

  

  • Combination (17)
  • Compression (33)
  • Made in USA Compression (6)
  • PUSH FIT (3)
  • PUSH-EMT® (4)
  • Raintight Compression (10)
  • Screw-In (3)
  • SET SCREW (26)
  • SOCxSOC (3)
  • Threaded Coupling (10)
  • Three-piece Conduit (7)
  • TRANSITION (3)
  • U Shaped (1)
  • Show More...

• Standard Package

  

  • 1 (1)
  • 1 PER CASE (3)
  • 10 (17)
  • 10 PER CARTON (30)
  • 100 PER CASE (1)
  • 100 W (3)
  • 12 (11)
  • 12 PER CARTON (3)
  • 12 PER CASE (1)
  • 15 (5)
  • 15 PER CARTON (2)
  • 150 per Pack (1)
  • 2 PER CASE (1)
  • 20 (12)
  • 20 PER CARTON (4)
  • 20 PER CASE (1)
  • 25 (1)
  • 25 PER CARTON (95)
  • 25 PER CASE (3)
  • 3 in (2)
  • 3 PER CARTON (2)
  • 30 (6)
  • 30 PER CARTON (5)
  • 30 PER CASE (1)
  • 4 (4)
  • 4 PER CARTON (4)
  • 4 per Case (2)
  • 40 (5)
  • 5 in (6)
  • 5 PER CARTON (8)
  • 50 FT (28)
  • 50 PER CARTON (9)
  • 50 PER CASE (1)
  • 6 (1)
  • 6 PER CARTON (2)
  • 8 PER CASE (1)
  • 8 W (8)
  • 9 (2)
  • BULK (23)
  • Show More...

• Hub Location

  

  • (1) EACH END (6)
  • (1) Each Side (3)
  • (1) End (8)
  • (1) Side (1)
  • (2) Side (1)
  • (2) Side, (1) Top (4)
  • 45 Degree (4)
  • 90 DEG (1)
  • 90 Degree (48)
  • BOTTOM, SIDE (1)
  • Cross (1)
  • Side (6)
  • Straight (11)
  • TEE (17)
  • TEE BACK (8)
  • Show More...

• Type

  

  • 1-HOLE (1)
  • 2 piece expansion coupling (1)
  • 3/4" EMT SET SCREW COUPLINGS STEEL (1)
  • 45 DEG (2)
  • 45 Degree (7)
  • 45 Degree Liquidtight Non-Insulated Connector (1)
  • 90 DEG (2)
  • 90 Degree (9)
  • Acoustical Lighting Hangers (1)
  • Aluminum Die Cast, Watertight Hubs, Insulated and Gasketed (3)
  • Basic hub (19)
  • Between Stud Box Mounting Brackets (1)
  • BLANK (4)
  • Bolt on accessories (2)
  • Box & Threaded Adapters (3)
  • Box Adapter (7)
  • BOX CONNECTOR (1)
  • Box Support (1)
  • Box Supports (2)
  • Bulkhead Fitting (7)
  • BUSHING (29)
  • Cable and conduit hanger (7)
  • Channel Bar (1)
  • CLAMP (3)
  • Coaxial F Adapter (1)
  • Combination Coupling (3)
  • Combination Coupling EMT TO Flex (1)
  • Commercial hub (10)
  • Communication Device (1)
  • Compression Connector (16)
  • Compression coupling (20)
  • Compression Couplings & Connectors (14)
  • Compression, Flex to EMT (1)
  • Concrete Pipe Sleeve (1)
  • CONDUIT (4)
  • Conduit Clamps (1)
  • Conduit Coupling (18)
  • CONDUIT HANGER (1)
  • CONDUIT HANGER WITH BOLT (1)
  • Conduit Hangers (1)
  • Conduit hub (3)
  • Conduit Nipples (1)
  • Conduit outlet box with cover (1)
  • Conduit-PVC Coated (4)
  • CONNECTOR (5)
  • COUPLING (138)
  • Coupling;Rigid (3)
  • Couplings (3)
  • DEAD END (8)
  • Double Snap (1)
  • EDGE (5)
  • ELBOW (1)
  • EMT (6)
  • EMT Conduit Compression Coupling (15)
  • EMT Conduit Fittings (20)
  • EMT Conduit Set Screw Coupling (9)
  • EMT Conduit Straight Set Screw Coupling (1)
  • EMT Pull Elbows (2)
  • END CAP (11)
  • ENT Flexible Raceway (8)
  • Erickson Couplings (1)
  • Expansion coupling (13)
  • Expansion Fittings (3)
  • EXPANSION JOINT (2)
  • F-81 (1)
  • FEED THROUGH (8)
  • Feed-Through (1)
  • Female Reducer (1)
  • FEMALE/FEMALE (10)
  • FEMALE/MALE (13)
  • Flex (3)
  • F-Type Module (1)
  • Gang Boxes (1)
  • Ground Hub (20)
  • Ground Hub Swing Type (2)
  • Ground Rod to Ground Rod (2)
  • Grounding bushing (4)
  • Grounding Bushings & Accessories (10)
  • Grounding Hub (8)
  • HUB (24)
  • Hub Connector (11)
  • Hub, Drain (1)
  • INLINE INTERSYSTEM BONDING BRIDGE (1)
  • Insulated Bushing (3)
  • Insulated Hub (5)
  • Insulating Bushing (1)
  • Intersystem Bonding Bridge (2)
  • Knockout Seal (2)
  • Liquidtight connector (43)
  • Locknuts (2)
  • Male & Female Adapters (1)
  • Male Terminal Adapter (2)
  • Male to Female Union (1)
  • MALE/FEMALE (3)
  • meter riser w/attached terminal adapter (2)
  • Miniature Lamp (1)
  • NAIL PLATE (2)
  • Non Metallic Bushing (1)
  • Offset Nipple (1)
  • PARALLEL (4)
  • PLUG (1)
  • Plugmold (5)
  • Poly Plug w/ Pulling Eye (1)
  • Power Rated Fitting (1)
  • Push-In Connector (1)
  • Push-in raintight coupling (1)
  • Raceway (7)
  • Raintight (2)
  • Raintight compression coupling (10)
  • REDUCER (3)
  • REDUCER BUSHING (1)
  • Reducing Bushing (12)
  • RIGHT ANGLE (6)
  • Right Angle Conduit Clamp (1)
  • Right angle type conduit clamp (1)
  • RIGID (9)
  • Rigid Non-Metallic Conduit Fittings & Accessories (3)
  • Rigid/IMC and EMT conduit (2)
  • Rigid/IMC Conduit Fittings (1)
  • Risers & Riser Caps (1)
  • RJ45 Female Cat 5e Coupler Keystone Insert (1)
  • Rod Coupling (12)
  • Rod/Wire (1)
  • ROUND BEND (10)
  • Schedule 40 Bell to Bell Swedged Reducer (1)
  • Schedule 40 Female Adapter (2)
  • Schedule 40 Long Line Coupling with no Center Stop (7)
  • Schedule 40 Long Line Center Stop Coupling (2)
  • Schedule 40 Longline Swedged Coupling with Center Stop (1)
  • Schedule 40 Split Sleeve Coupling (1)
  • Schedule 40 Standard Center Stop Coupling (21)
  • SCREW (1)
  • Sealing Locknut (10)
  • SET SCREW (1)
  • Set screw coupling, EMT (7)
  • Set Screw Slip (2)
  • Set screw type coupling (16)
  • Single Ended (1)
  • SPECIAL LARGE RADIUS (1)
  • SPECIAL RADIUS (9)
  • Split, 2-Piece (5)
  • Square cover (1)
  • Stainless Steel 3 PIECE COUPLING (1)
  • Stainless Steel Coupling (2)
  • Stainless Steel LINE TERMINATION HUB (3)
  • Stainless Steel MINI HANGER (1)
  • Stainless Steel Rigid Conduit (3)
  • Standard IN (1)
  • STANDARD RADIUS (48)
  • STRAIGHT (14)
  • Straight Insulated Throat Hub (2)
  • Straps (2)
  • SWEDGE RED. CPLG (3)
  • Swing Arm-Wall (1)
  • TEE (1)
  • THREADED (12)
  • Threaded Bushing (8)
  • THREADED FEMALE (37)
  • Threaded Hubs (6)
  • Threaded Reducer (1)
  • Threadless Connector (10)
  • Three Piece Coupling (10)
  • Three-piece conduit coupling (9)
  • Three-Piece Couplings (6)
  • Throat bushing (1)
  • Through Bulkhead Fitting (15)
  • Through Stud Cable/Conduit Supports (1)
  • Transition (6)
  • Type A Non-Grounding Insulating Bushing (8)
  • Type BB Non-Grounding Insulating Bushing (10)
  • Type ICC Phenolic Insulating Coupling (5)
  • UNF Standard Expansion Union (3)
  • UNF Union (1)
  • Union (1)
  • Universal Pipe Support (1)
  • Wall Plate (2)
  • Wallpack (1)
  • Watertight Hubs (9)
  • Wedge Grip Clamps (3)
  • Wire Holder with Hanger (1)
  • Show More...

• Size

  

  • 0.43 DIA X 1.19 (1)
  • 0.5 (1)
  • 0.75 x 0.57 x 1.2 (19.15 x 14.4 x 30.5) (1)
  • 1 (12)
  • 1 1/4 (1)
  • 1 in (12)
  • 1 in. (1)
  • 1 INCH (3)
  • 1 X 3/4 (1)
  • 1" (1)
  • 1.27 Inch Width x 1.73 Inch Height (1)
  • 1.38 In Diameter (1)
  • 1.42 Inch H (1)
  • 1.46 Inch Height (3)
  • 1.46 Inch Width x 1.48 Inch Height (1)
  • 1.56 In Diameter (1)
  • 1.64 Inch Height (3)
  • 1.64 Inch Width (2)
  • 1.67 Inch H (1)
  • 1.67 Inch Height (3)
  • 1.73 Inch Height (2)
  • 1.79 Inch Height (3)
  • 1.83 Inch Height (3)
  • 1.83 Inch Width (3)
  • 1.83 Inch Width x 1.98 Inch Height (1)
  • 1.88 In Diameter (1)
  • 1.92 Inch H (1)
  • 1.98 Inch Height (2)
  • 1/2 (15)
  • 1/2 in (10)
  • 1/2 in. (1)
  • 1/2 INCH (4)
  • 1/2 x 1-1/4 (1)
  • 1/4 x 7/8 (2)
  • 1-1/2 (9)
  • 1-1/2 in (9)
  • 1-1/2 in. (2)
  • 1-1/2 INCH (5)
  • 1-1/4 (9)
  • 1-1/4 in (7)
  • 1-1/4 in. (2)
  • 1-1/4 INCH (5)
  • 1-1/4 X 1/2 (1)
  • 12 X 12 (1)
  • 18" x 1-1/2" (1)
  • 1-Inch (2)
  • 2 (10)
  • 2 1/2 (1)
  • 2 1/2 Inch (1)
  • 2 in (11)
  • 2 in. (3)
  • 2 INCH (4)
  • 2 Inch Diameter (2)
  • 2 Inches (2)
  • 2 x 1/2 (1)
  • 2" (1)
  • 2.04 Inch Height (6)
  • 2.063 in x 0.875 in x 1.063 in (1)
  • 2.08 Inch Width (1)
  • 2.25 Inch Dia (1)
  • 2.25 Inch Diameter (4)
  • 2.27 Inch Height (1)
  • 2.27 Inch Width (3)
  • 2.27 Inch Width x 2.35 Inch Height (1)
  • 2.29 Inch Height (1)
  • 2.35 Inch Height (2)
  • 2.438 in x 0.875 in x 1.203 in (1)
  • 2.5 (1)
  • 2.5 Inch Dia (1)
  • 2.52 Inch Height (1)
  • 2.52 Inch Width (1)
  • 2.6 Inch H (1)
  • 2.6 Inch Height (3)
  • 2.82 Inch Height (4)
  • 2.83 Inch Height (2)
  • 2.83 Inch Width (1)
  • 2.83 Inch Width x 2.82 Inch Height (1)
  • 2-1/2 (6)
  • 2-1/2 in (5)
  • 2-1/2 in. (2)
  • 2-1/2 Inch (2)
  • 3 (11)
  • 3 in (6)
  • 3 in. (3)
  • 3 INCH (3)
  • 3.08 Inch H (3)
  • 3.08 Inch Height (1)
  • 3.17 Inch H (1)
  • 3.17 Inch Height (1)
  • 3.25 INCH DIA (2)
  • 3.25 INCH DIA X 2.94 INCH L (1)
  • 3.5 Inch Dia (2)
  • 3.5 INCH DIA X 3.19 INCH L (1)
  • 3.6 Inch Height (4)
  • 3.66m (12.0') (1)
  • 3.83 Inch Height (2)
  • 3.83 Inch Width (1)
  • 3.83 Inch Width x 3.6 Inch Height (1)
  • 3/4 (13)
  • 3/4 in (11)
  • 3/4 In (Rigid/EMT) (1)
  • 3/4 in. (2)
  • 3/4 INCH (5)
  • 3/4 Inch/21mm (1)
  • 3/4 Rigid, 3/4 EMT (1)
  • 3/4" (1)
  • 3/8 (1)
  • 3/8 in (1)
  • 3/8 In, 1/2 In (Rigid), 1/2 In (EMT) (1)
  • 3/8 x 1-1/8 (1)
  • 3-1/2 (3)
  • 3-1/2 in (3)
  • 3-1/2 in. (1)
  • 3-1/2 Inch (3)
  • 4 (9)
  • 4 in (6)
  • 4 in. (2)
  • 4 INCH (3)
  • 4.25 Inch Dia (2)
  • 4.25 INCH DIA X 3.75 INCH L (2)
  • 4.25 Inch Diameter (1)
  • 4.33 Inch H (3)
  • 4.7 in (1)
  • 4.71 Inch Width (1)
  • 4.75 Inch Dia (1)
  • 4-11/16" (1)
  • 5 (4)
  • 5" (1)
  • 5.25 Inch Dia (1)
  • 5.33 Inch H (1)
  • 5.98 INCH L X 2.48 INCH W X 1.67 INCH H (1)
  • 5/16 in (1)
  • 5/16 x 7/8 (1)
  • 6 (1)
  • 6 in. (1)
  • 6" (1)
  • 6" x 1-1/2" (1)
  • 6.25 Inch Dia (1)
  • 8 in (1)
  • 8-5/8 Inches Length x 4-1/2 Inches Width x 2-1/2 Inches Depth (1)
  • L(0.840) x W(0.840) x H(0.520) (1)
  • L(1.070) x W(1.070) x H(0.310) (1)
  • L(1.480) x W(1.480) x H(0.310) (1)
  • L(1.554) x W(1.441) x H(1.548) (1)
  • L(1.761) x W(1.997) x H(1.893) (1)
  • L(1.763) x W(1.995) x H(1.904) (1)
  • L(1.770) x W(1.750) x H(0.400) (1)
  • L(1.800) x W(1.800) x H(0.310) (1)
  • L(11.000) x W(1.750) x H(0.525) (1)
  • L(2.109) x W(1.333) x H(1.070) (1)
  • L(2.384) x W(1.607) x H(1.070) (1)
  • L(2.675) x W(2.675) x H(0.360) (1)
  • L(2.734) x W(1.944) x H(1.496) (1)
  • L(3.130) x W(2.184) x H(1.385) (1)
  • L(4.008) x W(3.258) x H(3.950) (1)
  • L(4.652) x W(3.425) x H(1.735) (1)
  • L(4.810) x W(4.022) x H(1.790) (1)
  • L(5.751) x W(2.500) x H(0.505) (1)
  • L(5.783) x W(4.545) x H(1.741) (1)
  • L(6.282) x W(5.040) x H(1.725) (1)
  • L(7.069) x W(2.269) x H(1.255) (1)
  • L(7.286) x W(5.350) x H(0.627) (1)
  • L(8.500) x W(4.125) x H(5.625) (1)
  • L(8.500) x W(6.125) x H(7.625) (1)
  • Show More...