Narrow By:

• Manufacturer: Greenlee

• Product Type

  

  • .500 Cond Round Die SC (1)
  • 1.000 (34, 6) Conduit (735) Round Die (1)
  • 1.218" SB 3/4"D/S Round Punch Unit (1)
  • 1.375" HSS Cutter (1)
  • 1.500 (49, 5) Round Conduit Die (1)
  • 1.750" HSS Cutter (1)
  • 1-1/8(1.125) X 7.62(61/62) Naileater Bit (1)
  • 2.00 (61, 5MM) Round Conduit Die (1)
  • 2.00" HSS Cutter (1)
  • 2.500 Round Conduit Punch (1)
  • 2-1/2 Ips (074MM) Die (1)
  • 2-1/2" Conduit Piston (1)
  • 3.00 (89, 8MM) Round Conduit Die (1)
  • 3.000 Round Conduit Punch (1)
  • 4.00 (115, 4) Round Conduit Die (1)
  • Al Hand Bender 1-1/4"Emt, 1"Rigid/Imc (1)
  • Arbor, Carbide Cutter Shank (3/8") (1)
  • Arbor, Holesaw 1/2 Shank W/3 Flats (1)
  • Bender, Hand-Ratchet (1800) (1)
  • Bit, E-Z Bore 2-1/8" (Pop) (1)
  • Bit, Naileater 1/2(.50) X 18.00(66PT-1/2) (1)
  • Bit, Naileater 1-1/8(1.125) X 18.00(66PT) (1)
  • Bit, Spade (1 Long) (33L) (Pop) (1)
  • Bit, Spade (1/2 Long) (33L) (Pop) (1)
  • Bit, Spade (1/2) (33A) (Pop) (1)
  • Bit, Spade (3/4 Long) (33L) (Pop) (1)
  • Bit, Spade (3/4) (33A) (Pop) (1)
  • Bit, Spade (3/8) (33A) (Pop) (1)
  • Bit, Spade (5/8) (Pop) (1)
  • Bit, Spade (7/8 Long ) (33L) (Pop) (1)
  • Bit, Spade (7/8) (33A) (Pop) (1)
  • Bit, Spade-SF Corded (3/8-Pop) (1)
  • Blade PKG, Bandsaw-10/14T (5/PK Pop) (1)
  • Blade PKG, Bandsaw-14/18T (1)
  • Blade Set, Replacement (1)
  • Blade, BX Cutter (1 PK) (1)
  • Blade, Replace (6-3/8 Steel Tooth) (1)
  • Blade-Replace (6-5/8 Steel Tooth) (1)
  • Blades, Replacement (1903) (1)
  • Bushing, Drive SCR 1.125X1.87X1.06 (1)
  • Cable Cutter (1)
  • Cable Cutter 350KCMIL (783310302087) (1)
  • Carbide Cutter (1-3/8") (1)
  • Carbide-Tipped Hole Cutter (1)
  • Conduit Piston (2)
  • Cutter, Carbide (1-1/8"). (1)
  • Cutter, Carbide (7/8"). (1)
  • Deburr Tool (1)
  • Die 1" Conduit (1)
  • Die 1-1/2" Conduit (Pop) (7212SP-1-1/2D) (1)
  • Die 1-1/4" Conduit (Pop) (7212SP-1-1/4D) (1)
  • Die 2" Conduit (Pop) (7212SP-2D) (1)
  • Die 3/4" Conduit (Pop) (7212SP-3/4D) (1)
  • Die, RD .500 Cond (22, 4) (735) (1)
  • Die, RD .750 (28, 2) Conduit (3/4"D/S) (1)
  • Die, RD 1.250 (43, 2) Conduit (735) (1)
  • Die, RD-1.500 Cond PKGD (1)
  • Die, RD-2.000 Cond PKGD (1)
  • Die-RD .500 Cond PKGD (1)
  • Die-RD .750 Cond (Pop) (3/4"D/S) (1)
  • Die-RD 1.000 Cond PKGD (1)
  • Die-RD 1.250 Cond PKGD (1)
  • Draw Stud, Hyd, 3/4" (1)
  • Draw Stud, Ko Speed (Pop)(7212SP11) (1)
  • Drill Tap Bit (3)
  • Drill/Tap Kit (1)
  • Drill/Tap, 10-24 (1)
  • Drill/Tap, 10-32 (1)
  • Drill/Tap, 5/16-18 (Pop) (1)
  • Drill/Tap, 8-32. (1)
  • Extension, Bit (12) (Pop) (1)
  • Extension, Bit (7/16"X12") (1)
  • Fishline, Conduit-Bonded Nylon (1)
  • Fishline, Conduit-Nylon 45 (1)
  • Fishtape, Steel-65' (Bulk Pack) (1)
  • Hole Cutter Kit (783310057666) (1)
  • Holesaw, Light 6-5/8 Steel Tooth (1)
  • Holesaw, Variable Pitch (1 1/8). (1)
  • Holesaw, Variable Pitch (2") (1)
  • Holesaw, Variable Pitch (3/4") (1)
  • HSS Cutter Kit (1)
  • HSS Large Arbor (1)
  • HSS Large Pilot Drill (1)
  • HSS Small Pilot Drill (1)
  • Knife, Fixed-Hawk Bill (3" SS Pop) (1)
  • Knockout Punch Driver Kit (1)
  • Ko Set, SB, 1/2" Cond (1)
  • Ko Set, SB, 1-1/2" - 2" (1)
  • Level, Bubble (Pop) (1)
  • Level, Torpedo (L107) (Pop). (1)
  • Metal Stud Punch (1)
  • Multimeter, Pocket (PDMM-20) (1)
  • Nut Unit-Hex 1-12 BB Drive (1)
  • Nylon Conduit Fishline (1)
  • Oil, Thread Cutting-1 Gal Lite (1)
  • Pilot Drill (1)
  • Pilot Drill 5/8" - 2-1/4" Cutter Size (1)
  • Piston, 2" Conduit (1)
  • Piston, 3" Conduit (1)
  • Piston, 3-1/2" Conduit (1)
  • Piston, 4" Conduit (1)
  • Piston, Boxed-1/2" (1)
  • Piston, Boxed-1-1/2" (1)
  • Piston, Boxed-1-1/4" (1)
  • Poly Pro Rope 3/8x250feet (1)
  • Punch & Die Set (2)
  • Punch 1" Cond Speed (Pop) (7212SP-1P) (1)
  • Punch 1-1/2" Cond (Pop) (7212SP-1-1/2P) (1)
  • Punch 1-1/4" Cond Speed (Pop) (1)
  • Punch 2" Conduit (Pop) (7212SP-2P) (1)
  • Punch 3/4" Cond Speed (Pop)(7212SP-3/4P) (1)
  • Punch Assembly, Stud-Metal (710) (1)
  • Punch Unit-RD 30.5MM BB (1)
  • Punch, Buster-1 SC PKGD (1)
  • Punch, Buster-3/4 SC PKGD (1)
  • Punch, SB, 2" Cond Pop (1)
  • Punch, SR, 4" Cond (1)
  • Punch-RD .500 Cond PKGD (1)
  • Punch-RD 1.000 Cond PKGD (1)
  • Punch-RD 1.500 Cond PKGD (1)
  • Quick Cutter Adjustable Holesaw (1)
  • Recessed Light Hole Saw (1)
  • Replacement Kit-Replac Tip Naileater-1" (1)
  • Replacement Stud (1)
  • Replacemnt Kit-Replac Tip Naileater-7/8" (1)
  • Screw Anchor Expander (2)
  • Screw Unit, Drive (1)
  • Screw Unit-Drive 3/4 (730/737) PKGD (1)
  • Screw, Adapter 3/4-16X5/8-18 (1904) (1)
  • Screw, Adapter 3/8-24X5/8-18X3.06 (1)
  • Screw, Adaptor-Short (3/8"). (1)
  • Small Arbor (1)
  • Spacer (.767X1.37X.1.25BK) (76 (1)
  • Speed Punch Lock (Pop) (SP-Lock) (1)
  • Spring-Comp .474X.600X3.00 (1)
  • Tape-Measuring 3/16" Poly (21562) (1)
  • Ultra Cutter (2)
  • Wrench Set, Ratcheting 7 PC. (1)
  • Wrench, Combo Ratchet 3/4" (1)
  • Wrench, Combo Ratcheting 1/2" (1)
  • Wrench, Combo Ratcheting 3/8" (1)
  • Wrench, Combo Ratcheting 5/16" (1)
  • Wrench, Combo Ratcheting 5/8" (1)
  • Show More...

• Brand

  

  • GREENLEE (125)
  • Greenlee Textron (23)
  • Show More...

• Bit Size

  

  • 1/4 in (1)
  • 1/4 in;6.4 mm (1)
  • Show More...

• Shank Diameter

  

  • 1/4 in (3)
  • 3/8 in (1)
  • 7/16 IN (11.100 MM) (1)
  • 7/16 IN. Hex (1)
  • Show More...

• Hole Size

  

  • 1-1/8" (28.6 mm) for 3/4" conduit (1)
  • 1-3/8" (34.9 mm) for 1" conduit (1)
  • 7/8" (22.2 mm) for 1/2" conduit (1)
  • Show More...

• Material

  

  • 440C Stainless Steel (1)
  • Aluminum (2)
  • Carbide Cutter Shank (1)
  • CARBIDE TIP (3)
  • Carbide Tipped (1)
  • Carbon Steel, Nickel Plated (5)
  • COBALT STEEL (1)
  • Flexible Foam (1)
  • For stainless steel, copper, brass and aluminum (1)
  • For use in mild steel, brass, copper, aluminum, fiberglass and plastics (1)
  • For use in mild steel, stainless steel, brass, copper, aluminum, fiberglass and plastics (2)
  • Hardened Alloy Steel (2)
  • High Speed Steel (14)
  • High Speed Steel Pilot Drill Bit (1)
  • High-Speed Steel (1)
  • Nylon (3)
  • Porcelain Steel (1)
  • Punch up to 10 ga mild steel (2)
  • Punch up to 10 ga mild steel or 12 ga stainless steel (1)
  • See punch and knockout driver specifications. (1)
  • Steel (1)
  • Steel (Teeth) (1)
  • Waterproof Polyester (1)
  • Show More...

• Conduit/Pipe Size

  

  • 1/2 to 1-1/4 in (1)
  • 1/2 to 2 in (1)
  • Show More...

• Handle Material

  

  • Full-Length Solid Tang With Rosewood Facing, Stainless Bolster And Lanyard Hole (1)
  • Steel with rubber grips (1)
  • Show More...

• Color

  

  • Bright Yellow With Green Tracer (1)
  • Green (2)
  • Show More...

• Teeth Per Inch

  

  • 14/18 TPI (1)
  • 20 (1)
  • Show More...

• Includes

  

  • (1) 3 V Battery (CR2032), Carrying Case (1)
  • 34941 Ratchet wrench- 1 IN Hex, 721-1/2 1/2 IN Conduit SizePunch, 14722 1/2 IN Conduit Size Die, 721-3/4 3/4 IN Conduit Size Punch, 124AV 3/4 IN Conduit Size Die, 721-1 1 IN Conduit Size Punch, 126AV 1 IN Conduit Size Die, 721-1-1/4 1-1/4IN Conduit Size (1)
  • Hex wrench and spare set-screw. (1)
  • Includes 1-1/2" - 2" conduit size Slug-Buster® punches and dies. 7/16" ball-bearing draw stud, 3/4" ball-bearing draw stud and KCC-BB2 carrying case. (1)
  • Punch, Die And Draw Stud (1)
  • Punches, Dies and Draw Studs (1)
  • Show More...

• Special Features

  

  • Cleans burrs from both sides of the hole in seconds. Works with any hole size or shape 3/4" or larger. Ensures safety with less chance of personnel or equipment being cut on sharp edges. (1)
  • Compact reversible switch allows a 15 degree offset of the box end for clearance of obstacles. Five degree ratcheting design for versatility and ease of use in tight spaces. Precision heads for accurate fastener fit. Hardened for durability and longer life. Exceeds ASME/ANSI specifications (1)
  • Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor. Back tapered beyond tap to prevent thread damage from over-drilling. Made from hardened high-speed steel versus carbon-steel for longer life. High wuality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10 gauge metal. Quick change adaptor included (1)
  • Cuts in Seconds with a Few Quick Turns of the Crank and an Easy Twist of the Armor;Convenient Under-Handle Blade Storage Holds Spare Blades;Quick Load Clamp System Makes Repeat Cuts Fast and Easy (1)
  • Cuts stainless steel quickly and easily. Quick Change arbor allows for easy changes to cutter heads. Flange stop prevents over-drilling. Replaceable cobalt-steel pilot drill with split-point tip prevents walking. Miminum chuck size 3/8 In. (1)
  • Cuts through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8 In cut to go through wood studs. Extra-tough bi-metal blade made of highest grade tool steel. Steam oxide finish for cooler running saw. Extra-thick backplate minimizes vibration. (3)
  • Easy threading - "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. Laser markings for quick part identification. Use with Greenlee battery-hydraulic knockout drivers or 746A ram. Use with Greenlee punches and dies. Made in the USA. Replaces 2113B (1)
  • For use with new Greenlee KRW-1 high-leverage ratchet wrench. Slug-Buster® punch profile splits slugs for easy slug removal. Knurled edge on punches for better grip. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Punches, dies and case made in the USA. Draw stud manufactured in the USA from US and global components. (2)
  • Highly-visible bright yellow with green tracer, excellent for roping off areas on construction sties. Rot and mildew resistant. Weather resistant. Economical general purpose rope (1)
  • Industry's only interchangeable replacement blades. Strong durable back plate. Use with power drill to cut large diameter holes for recessed lighting fixtures. (4)
  • Kit includes six (6) hole saws, three (3) arbors, hex wrench and case. Precision-ground teeth cut smooth, burr-free holes with ease. Split point pilot drill prevents walking making accurate hole placement easy. Spring-loaded slug ejector saves time. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel. (1)
  • Laser markings for quick part identification. Made in USA. Replaces 2984AV (1)
  • Multiple tungsten carbide tips for long life and smooth cutting. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill with split-point tip improves performance and resists walking. Eliminates need for center punch. (1)
  • Oil-tempered spring steel for excellent fishing performance. Dirt-free tape finish keeps hands cleaner during use. Advanced comfort handle grip reduces fatigue. Superior rapid tape pay-out and rewind. Smaller Fish Eye with offset bend for improved fishing ability. Improved low profile tip for easy fishing through all sizes of conduit. Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly. Rugged case design improves drop impact capability. Flared case with Grip Ridges (1)
  • Precision-ground teeth cut smooth, burr-free holes with ease. Split point pilot drill prevents walking making accurate hole placement easy. Spring-loaded slug ejector saves time. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel. (5)
  • Punches up through 20 gauge steel studs in one stroke. Aluminum head privides strength with minimum weight. Contoured handle design gives better operator leverage and makes it possible to punch in tight places. Self-stripping design eliminates punch hang-ups. (2)
  • Quickest most affordable way to cut perfect ceiling holes for recessed lighting. Self-sharpening carbide-sprayed cutting tips can cut dozens of holes in abrasive materials and still stay sharp. Dedicated arbor and pilot drill eliminates changeover time. Fits 3/8 In chuck and works with a cordless drill. Includes dust shield to eliminate flying dust and debris. (1)
  • Ratchet action for increased leverage Bypass the ratchet for fast, direct bending on smaller sizes Heavy-duty welded construction for long, reliable service Built-in bending degree indicator and easy to use bending charts for accurate, consistent bends Does not include handle (1)
  • Strong, lightweight nylon. Center feed for fast payout without tangling. Use with Mighty Mouser® blow gun. Mildew-resistant, can be pulled into the run with the wire to provide a means to add wires later. (1)
  • Strong, lightweight nylon. Specially wound to payout fast from outside without tangles. Use with Mighty Mouser® blow gun. Mildew-resistant, can be pulled into the run with the wire to provide a means to add wires later. (2)
  • Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light Choice of aluminum or iron alloy construction provides options depending on the user's preference for feel and weight Strong, stable square hook design 1-1/2" bender heads both offer the power pedal feature with a larger foot area on the head for greater control, stability and leverage 1/2", 3/4" & 1" bender heads all have enlarged foot pedals (1)
  • Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection. Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate cutting with less force. Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required. Flange Stop – eliminates over-drilling. Slug Ejector Spring – quick, easy slug removal Cuts round, burr-free holes (3)
  • Unique punch profile splits slugs allowing for easy slug removal. Knurled edge for better grip. Laser markings for quick part identification. Alignment markings for improved accuracy. Punch and die Made in USA. Replaces 60246 (1)
  • Unique punch profile splits slugs allowing for easy slug removal. Knurled edge for better grip. Laser markings for quick part identification. Made in USA. Replaces 721-2P (1)
  • Use with blower or vacuum power fishing system to pioneer the line through the conduit run. Flexible foam body for an air-tight seal. Color-coded end disk with embossed size marking for fast easy selection. Strong steel center rod with loops on both ends. Pistons available for all types and sizes of conduit 1/2" - 6". (10)
  • Show More...

• Application

  

  • 5 Piece Quick Change Carbide Tipped Hole Cutter kit cuts stainless steel quickly and easily (1)
  • 6 Piece Ultra Cutter kit for conduit sizes 1/2 - 2 In. (1)
  • Bi-Metal Hole Saw with 1-5/8 In cutting depth allowing cutting on 2x4 studs. Extra-thick backplate minimuzes vibration for smoother, easier cutting. (3)
  • Can be used with Greenlee battery-hydraulic knockout drivers, manual-hydraulic knockout drivers, or ratchet wrench. Use with Greenlee dies and draw studs. (2)
  • Conduit Bending (2)
  • Cut Fast, Accurate, High Quality Holes in Stainless Steel, Copper, Aluminum, Steel (1)
  • Deburr from both sides of any hole greater than 3/4" (1)
  • For 1.000 Nail Eater Auger Bit IN (1)
  • For 1940 Flexible Metal Conduit Cutter (2)
  • For 3/4" - 2" conduit size Slug-Buster® and Standard Round knockouts. Use with Greenlee battery-hydraulic knockout drivers or 746A ram. (1)
  • For 7/8 Nail Eater Auger Bit IN (1)
  • For 77U-1 Slug-Buster SC® Knockout (1)
  • For 77U-3/4 Slug-Buster SC® Knockout (1)
  • For Bore Hardwood, Softwood, Plywood And Drywall (10)
  • For Boring Deeper Wood IN (2)
  • For boring fast, clean holes through various wood materials in electrical, plumbing, and remodeling applications (1)
  • For Conduit Measurement (1)
  • For Excellent Fishing Performance (1)
  • For mild steel, copper, brass and aluminum (1)
  • For Pipe And Conduit Work (1)
  • For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. (12)
  • For punching holes in mild steel, aluminum, brass, copper, fiberglass and plastics (3)
  • For Standard Round Knockout Punch Unit (1)
  • For Versatility And Ease Of Use In Tight Spaces And Accurate Fastener Fit (5)
  • General purpose Polypro rope not for cable pulling. (1)
  • Hole Drilling;Tapping;Deburring/Countersinking (3)
  • Large arbor with pilot drill for 1-3/8 - 2-1/2" cutters (1)
  • Masonry (2)
  • Metal Stud Punch punch up through 20 gauge 1-5/8" steel studs. (1)
  • Metal Stud Punch punch up through 20 gauge 2-1/2" steel studs. (1)
  • Premium high lubricity oil to make cutting easier and extend life of the tool. (1)
  • Punch mild steel, aluminum, fiberglass and plastic (2)
  • Quick Cutter recessed hole saw. Adjustable in 1/2 In increments for cuts of 2-1/2-7 In (1)
  • Replacement bi-metal band saw blade (1)
  • Replacement blade for Greenlee 35713 (1)
  • Replacement blade for Greenlee 35714 (1)
  • Replacement draw stud for use with manual drivers and standard round knockouts. (1)
  • Slug Splitter® SC Knockouts for battery-powered, hydraulic and ram drivers. Capacity up through 10 gauge stainless steel. (1)
  • Slug-Buster® round replacement punch for battery-powered, hydraulic and ratchet drivers. (3)
  • Slug-Buster® round replacement punch unit for battery-powered, hydraulic and ratchet drivers. (1)
  • Small arbor with pilot drill for 7/8 - 1-7/32" cutters (1)
  • Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics (3)
  • Standard replacement draw stud for use with standard knockout punches. Use with batter-powered, hydraulic, ratchet or manual drivers. (2)
  • Standard round replacement die for use with standard knockout punches. Use with batter-powered, hydraulic, ratchet or manual drivers. (6)
  • Steel Toothed Blade Recessed Light Hole Saw (2)
  • Use with AC and MC Cable up to 1.000 IN (1)
  • Use with battery-powered, hydraulic, ratchet or manual drivers. Capacity up to 10 gauge mild steel. Use on mild steel, aluminum, fiberglass and plastic. (9)
  • Use with blower or vacuum power fishing system to start conduit run. (10)
  • Use With Greenlee Arbors #37154, #37155, #37156 And #37157 (1)
  • Use with Greenlee arbors 5/8 - 2-1/4". Split-point tip design eliminates need for center punch and resists walking. (1)
  • Use With Greenlee Bimetal Hole Saws, Recessed Light Hole Saws And Carbide Grit Hole Saws (Carbide-Tipped Pilot Drill Sold Separately), Can Be Used With Greenlee No 901 Or 904 Bit Extensions, 1-1/4 IN - 6.000 IN (31.800 - 152.400 MM) Hole Saws And All Gree (1)
  • Use with Greenlee large arbor 925-022 (1)
  • Use with Greenlee small arbor 925-011 (1)
  • Use with KRW-1 ratchet wrench. (1)
  • Show More...

• Overall Length

  

  • 10.63 in (1)
  • 16.000 IN (406.400 MM) (4)
  • 18 in (1)
  • 4-1/8 in;104.8 mm (1)
  • 5 IN. (127MM) (1)
  • 5-5/16 IN (13.500 CM) (1)
  • 6-1/4 IN (158.800 MM) (6)
  • 6-1/8 IN (15.900 CM) (1)
  • 7.000 IN (18.000 CM) (1)
  • 7.625 in (1)
  • 8-3/8 IN (21.600 CM) (1)
  • 9.01 in (1)
  • 9-3/4 IN (24.800 CM) (1)
  • Show More...

• Package Quantity

  

  • 1 BX (2)
  • 1 ct (6)
  • 1 PK (1)
  • 5 PK;1 CT (5)
  • Show More...

• Weight

  

  • 0.03 lb (2)
  • 0.05 lb (1)
  • 0.06 lb (1)
  • 0.08 lb (3)
  • 0.080 LB (0.080 KG) (1)
  • 0.090 LB (40.800 GM) (2)
  • 0.1 lb (1)
  • 0.100 LB (45.300 GM) (3)
  • 0.120 LB (0.050 KG) (1)
  • 0.120 LB (54.400 GM) (1)
  • 0.2 lb;91 g (1)
  • 0.220 LB (0.100 KG) (1)
  • 0.330 LB (150.000 GM) (2)
  • 0.370 LB (0.170 KG) (1)
  • 0.4 lb;0.2 kg (1)
  • 0.400 LB (181.000 GM) (1)
  • 0.500 LB (227.000 GM) (1)
  • 0.530 LB (0.240 KG) (1)
  • 0.550 LB (250.000 GM) (1)
  • 0.6 lb;0.3 kg (1)
  • 0.600 LB (273.000 GM) (1)
  • 0.69 lb (1)
  • 0.7 lbs. (0.32 kg) (1)
  • 0.700 LB (318.000 GM) (1)
  • 0.72 lb;0.33 kg (1)
  • 0.900 LB (409.000 GM) (1)
  • 1.2 lb;0.54 kg (2)
  • 1.400 LB (636.000 GM) (1)
  • 10 lb;4.54 kg (1)
  • 2.300 LB (1044.000 GM) (1)
  • 2.700 lb;1.200 kg (1)
  • 2.900 LB (1316.000 GM) (1)
  • 4.400 LB (2.000 KG) (1)
  • 5.500 OZ (1)
  • Show More...

• Drive Size

  

  • 1/2 in (1)
  • 3/4 IN (1)
  • 3/8 in (1)
  • 5/16 in (1)
  • 5/8 IN (1)
  • Show More...

• Conduit Size

  

  • 1/2" through 1" Rigid and IMC Conduit (1)
  • 1-1/2 in (1)
  • 1-1/4" EMT & 1" Rigid (1)
  • Show More...

• Shank Type

  

  • Hexagonal (10)
  • QUICK CHANGE (1)
  • Show More...

• Package Type

  

  • Pop (3)
  • Re-usable storage tube (1)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (2)
  • BITS, BLADES, AND HOLE SAWS (29)
  • HAND TOOLS (82)
  • PULL LINE, ROPE, CARRIERS (3)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (5)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (1)
  • TOOL BAG/POUCHES (22)
  • Show More...

• Type

  

  • Adustable recessed hole saw cutter (1)
  • Bi-Metal (1)
  • Bi-Metal Hole Saw (3)
  • Cable Cutter (1)
  • Cable Cutter AC and MC up to 1" (1)
  • Carbide-Tipped (1)
  • Carbide-Tipped Hole Cutter (3)
  • Draw Stud (1)
  • Electrician's Torpedo (1)
  • Fixed Blade, Hawkbill (1)
  • Foam conduit piston for IMC and Rigid (4)
  • Foam piston for all conduit types (6)
  • Hand Bender (1)
  • HEX (1)
  • Hex Shank (1)
  • Knockout Set (1)
  • Large arbor with split point pilot drill to prevent walking (1)
  • Light Cutting / Threading Oil (1)
  • Manual Knockout Set (1)
  • Mechanical Bender (1)
  • Mini Magnetic (1)
  • Pilot drill bit (3)
  • Pilot, Replacement (1)
  • POCKET (1)
  • QUICK CHANGE (1)
  • Quick Change Carbide Tipped Hole Cutter (1)
  • Recessed Light Hole Saws (4)
  • Replacement (2)
  • Replacement Die (1)
  • Replacement Die for SPEED PUNCH® Knockout Punches (3)
  • Replacement Die for standard round knockout punches (7)
  • Replacement Draw Stud (1)
  • Replacement Draw Stud for SPEED PUNCH® Knockout Punches (1)
  • Replacement Manual Draw Stud ball bearing (2)
  • Replacement Punch for SPEED PUNCH® Knockout Punches (2)
  • Replacement Punch for standard round knockout punches (2)
  • Replacement Speed Lock for SPEED PUNCH® knockout units (1)
  • Replacement Standard Round Die (6)
  • Replacement, Round (4)
  • Self Feeding (1)
  • Self-Feed Wood Boring Bit (1)
  • Slug Splitter® SC Replacement Die 1/2" Conduit size (1)
  • Slug-Buster® Punch (1)
  • Slug-Buster® Punch Unit (1)
  • Small arbor with split point pilot drill to prevent walking (1)
  • SPEED PUNCH® replacement die (2)
  • SPEED PUNCH® replacement punch (3)
  • Standard 7 piece ratcheting wrench set (1)
  • Standard BB round punch unit (1)
  • Standard Round Punch (1)
  • Standard, Combination (5)
  • Ultra Cutter Hole Saw (5)
  • Ultra Cutter Hole Saw Kit (1)
  • Show More...

• Size

  

  • #10 (2)
  • #6 (1)
  • #8 (1)
  • 1 GAL (1)
  • 1 in (3)
  • 1.115 IN (1)
  • 1.362 IN (1)
  • 1.362 IN (34.600 MM) Actual Hole Size (1)
  • 1.951 IN (49.600 MM) Actual Hole Size (1)
  • 1/2 in (4)
  • 1/2 x .02 x 44-7/8" (1)
  • 1/2" - 1-1/4" conduit size knockouts (hole size: 0.89" - 1.70" or 22.5 mm - 43.2 mm) (1)
  • 1/2" Conduit (0.89" or 22.5 mm) (1)
  • 1/4 in (1)
  • 1/4 IN Hex Shank (1)
  • 1-1/2 in (2)
  • 1-1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm) (1)
  • 1-1/4 in (3)
  • 1-1/8 In (1)
  • 1-11/32 In (1)
  • 1-3/8 In (1)
  • 2 in (3)
  • 2" Conduit (2.42" or 61.5 mm) (1)
  • 3/4 in (3)
  • 3/4 x 2-1/8 In (1)
  • 3/4 x 2-5/16 In (1)
  • 3/4 x 4.77 In (1)
  • 3/4" (1)
  • 3/8 in (1)
  • 3/8 x 1-5/8 In Draw Stud for Manual Drivers (1)
  • 30.5 MM (2)
  • 4" Conduit (4.54" or 115.4 mm) (1)
  • 5/6 IN (1)
  • 6 piece, 6-32 to 1/4-20 (1)
  • 7/16 IN Hex Shank (1)
  • 7/8 IN (3)
  • Replacement Die for 1-11/16 In Standard Round Knockout (1)
  • Replacement Die for 1-3/8 In Standard Round Knockout (1)
  • Replacement Die for 2-1/4 In Standard Round Knockout (1)
  • Replacement Die for 2-3/8 In Standard Round Knockout (1)
  • Replacement Die for 2-7/8 In Standard Round Knockout (1)
  • Replacement Die for 3/4 In Standard Round Knockout (1)
  • Replacement Die for 3-1/2 In Standard Round Knockout (1)
  • Replacement Die for 5/8 In Standard Round Knockout (1)
  • Replacement Punch for 2-7/8 In Standard Round Knockout (1)
  • Replacement Punch for 3-1/2 In Standard Round Knockout (1)
  • Sizes are specific to each product. (1)
  • Show More...

• Length

  

  • 12.000 IN (2)
  • 2150 FT (1)
  • 2200 FT (1)
  • 2750 FT (1)
  • 3000.000 FT (914.000 M) (1)
  • 5-1/2 (1)
  • 8-1/2 (1)
  • Show More...

• Capacity

  

  • 1 In (1)
  • 1/2 In (1)
  • 1-1/2 In (1)
  • 1-1/4 In (1)
  • 2 In (1)
  • 2-1/2 In (1)
  • 3 In (1)
  • 3/4 In (1)
  • 3-1/2 In (1)
  • 4 In (1)
  • Optimized for mild steel. Limited stainless steel capability (2)
  • Optimized for use in mild steel (1)
  • See punch and knockout driver specifications. (1)
  • Show More...