Narrow By:

• Category: Tools

• Product Type

  

  • 1/2 In. Conduit Bender (2)
  • 100 FT. Polyester Fish Tape (2)
  • 12-Ton (9)
  • 15 In 1 Screwdriver Blue / Yellow (2)
  • 16IN Tongue and Groove Plier (2)
  • 200 FT. Polyester Fish Tape (2)
  • 3" Carbide Tipped HS (2)
  • 3/16 In. 2 Cutter SDS Carbide Bit (2)
  • 3/4 In. Conduit Bender (2)
  • 3/8” Magnetic Nut Driver Bulk 10 (2)
  • 3M™ Fire Barrier Moldable Putty Pads MPP+ (2)
  • 3M™ Wire-Pulling Lubricant WL (3)
  • 50 FT. Polyester Fish Tape (2)
  • Accu-Bend(TM) Conduit and Pipe (2)
  • Adjustable Wrench (2)
  • Advent Stepladder (5)
  • Alligator Pliers (2)
  • Amplifier Probe (1)
  • Angled Diagonal Cutter (3)
  • Anti-Oxidant Compound (4)
  • Arbor and Drill (4)
  • Auger Drill Bit (2)
  • Band Saw Blade (3)
  • Bandsaw Blade (6)
  • Bandsaw Blades 3PK Compact (2)
  • Bender With Handle (3)
  • Butt Pouch (2)
  • Cabinet Tip Mini Screwdriver (2)
  • Cabinet Tip Screwdriver (3)
  • Cable Cutter (7)
  • Cable Stripper (1)
  • Canvas Bag (2)
  • Canvas Zipper Bag (3)
  • Carbide Cutter Sheet Metal (3)
  • Carbide Hole Cutter (2)
  • Caulking Gun (1)
  • Chico A Sealing Compound (2)
  • Chico X Fiber (2)
  • Clamp Meter (3)
  • Cleaner (2)
  • CLP M, 600A, 60K Ohms (2)
  • Cobra Pliers (2)
  • Color Coded Drive Bit (8)
  • Comfort Belt (2)
  • Comfort Combo Belt (2)
  • Comfort Grip Glove (7)
  • Compact Band Saw Blade (4)
  • Conduit And Pipe (2)
  • Conduit Measuring Tape (1)
  • Conduit Piston (2)
  • Conduit Reamer (1)
  • Contact Cleaner (1)
  • Crimp Tool (1)
  • Crimping Tool (1)
  • Crimping/Cutting Tool (2)
  • Cushion-Grip Screwdriver Set (1)
  • Cutting Oil (1)
  • Cutting Plier (3)
  • Demolition Gloves (3)
  • Diagonal Cutting Plier (5)
  • Dipped Gloves (4)
  • Draw Stud (1)
  • Drill Bit (22)
  • Drill Bit Set (2)
  • Drill Tap Bit (2)
  • Drive Bit (10)
  • Driver Bit (11)
  • Electric Grease (1)
  • Electrical Coating (1)
  • Electrical Insulating Resin (1)
  • Electrical Silicone Lubricant 10 WT Oz (2)
  • Electrical Tester (2)
  • Electrical Tester Holster (1)
  • Electrician Tool Set (1)
  • Electrician's Scissor (3)
  • Electrician's Tool Belt (5)
  • Electronic Ac/DC Voltage Tester (2)
  • Extension Ladder (1)
  • Fiber (2)
  • Fire Barrier Sealant (2)
  • Fishtape, Steel-65' (Bulk Pack) (2)
  • Flat Boring Bit (8)
  • Foam Carrier (6)
  • Folding Hex Key Set (3)
  • Folding Utility Knife (2)
  • Forcelogic™ M18™ 10-Ton Knockout to (2)
  • Fuse Puller (2)
  • Glove (12)
  • Groove Joint Plier (5)
  • Ground Rod (1)
  • Ground Rod Driver (2)
  • Hacksaw 218HE 12 X1/2X023X18 100/PK (2)
  • Hacksaw 232HE 12 X1/2X023X32 100/PK (2)
  • Hacksaw Blade (2)
  • Hammer Drill Driver Kit (1)
  • Hammer Drill/Driver and Reciprocating Saw Kit (1)
  • Hand Caddy (1)
  • Hand Hacksaw Blade (1)
  • Hand Saw (1)
  • Handi Foam Expanding Sealant (1)
  • Hard Hat (3)
  • Heavy Duty Degreaser (1)
  • Heavy Duty Side Cutting Pliers (2)
  • High Leverage Cable Cutter (2)
  • High Tension Hacksaw (2)
  • High Voltage Splice Cleaner (1)
  • Hole Cutter (3)
  • Hole Saw (35)
  • Hole Saw Arbor (5)
  • Hole Saw Kit (2)
  • Holesaw T2 14L 7/8 22MM 1/BX (2)
  • Impact Driver Bit (9)
  • Impact Socket Adapter (2)
  • Indl True RMS Ukntim (2)
  • Instant Cold Galvanize Coating (1)
  • Jab Saw (2)
  • Joint Compound (1)
  • Keystone-Tip (3)
  • Knock'Er Loose Penetrating Solvent 13 Oz (2)
  • Knockout Seal (2)
  • Line Measuring Tape (5)
  • Linemans Pliers (2)
  • Linemeasuring Tape (5)
  • Locking Bit Holder (2)
  • Locknut Wrench (2)
  • Long Nose Plier (3)
  • Long Nose Pliers Side Cutting (2)
  • Long Nose Side Cut Plier (2)
  • Louisville Ladder (2)
  • Low-VOC Cleaner (2)
  • Lubricant (8)
  • Magnetic Bit Holder (4)
  • Magnetic Hanger (2)
  • Magnetic Hex Tool (3)
  • Magnetic Nut Driver (7)
  • Manual Crimp Tool (2)
  • Marking Paint (1)
  • Masonry Drill Bit (4)
  • Metal Blade (9)
  • Metal-Cutting Blade (6)
  • Mid-Flex Glow Rod Set (2)
  • Multi-Bit Screwdriver and Nut Driver (4)
  • Non-Chlorinated Degreaser (1)
  • Nut Blaster (2)
  • Nut Driver Cushion-Grip (1)
  • Nut Driver Set (4)
  • Nut Driver Sets (2)
  • Oxide Inhibitor (1)
  • Penetrant (1)
  • PENETROX E (2)
  • Phillips Screwdriver (3)
  • Phillips-Tip (3)
  • Phone Holder (3)
  • Phone Holder with Belt Clip (3)
  • Pilot Bit (2)
  • Pilot Drill (1)
  • Pilot Drill Bit (2)
  • Pipe Thread Sealant (3)
  • Pliers Wrench (2)
  • Pocket Knife (4)
  • Polarized Aqua Precision Blue Mirror (2)
  • Porta-Band 44-7/8X1/2X023X14TW 3/PK (2)
  • Power Tool Battery Pack (1)
  • Precision Contact Cleaner (1)
  • Primer (6)
  • Professional Grade Shovel (4)
  • Protective Eye Glass (2)
  • Protective Eyewear (7)
  • Pulling Device (23)
  • Pull-Line (3)
  • Pump Plier (3)
  • Punch & Die Set (2)
  • Punch-RD .500 Cond PKGD (2)
  • Putty Pad (1)
  • Putty Stick (1)
  • Quick-Rotating (2)
  • Ratcheting Cable Cutter (2)
  • Receptacle Tester (3)
  • Reciprocating Saw Blade (4)
  • Recips 156R 12X3/4X050X6 5/PK (2)
  • Recips 676RC 6X7/16X050X 6 5/PK (2)
  • Replacement Bit (3)
  • Replacement Blade (2)
  • Replacement Plier Handle (2)
  • Roof Flashing (4)
  • Roof Jack (2)
  • Rope (4)
  • Rotary Hammer Drill Bit (12)
  • RS-101A- Super Roto-Split Cutter (2)
  • Safety Glass (3)
  • Safety Glasses (4)
  • Safety Vest (2)
  • Sawzall Blade (6)
  • Sawzall® Blades (2)
  • Scotch-Brite™ Hand Pad 7447 (2)
  • Screw Anchor Expander (2)
  • Screw Unit, Drive (2)
  • Screw, Adaptor-Short (3/8"). (2)
  • Screwdriver (3)
  • Screwdriver Set (2)
  • Sealing Compound (4)
  • Sensor (2)
  • Ship Auger Bit (13)
  • Shockwave Impact Duty Magnetic Nut Driver Set (2)
  • Side Cutting Plier (1)
  • Side Cutting Pliers (2)
  • Small Thread Arbor (3)
  • Solvent Cement (11)
  • Sport Protective Eyewear (2)
  • Spray Adhesive (1)
  • SQ2 Insert Bits (2)
  • SQ2 Power Bits (3)
  • Standard Pump Pliers (3)
  • Steel Fish Tapes (1)
  • Step Drill Bit (13)
  • Step Ladder (10)
  • Tapping Tool (1)
  • Test Lead Set (2)
  • T-Handle Set With Stand (2)
  • Thread Lubricant (3)
  • Tool Box (1)
  • Torch Carbide Teeth (4)
  • Torpedo Level (1)
  • Tote (2)
  • Ultra Cutter (2)
  • Uncorded Ear Plug (1)
  • Utility Blade (2)
  • Utility Knife (1)
  • Utility Knife Blade (1)
  • Vari Bit VB1 1PK Hole Size 1/8"-1/2" (2)
  • Vari Bit VB7 1PK Hole Size 7/8" (2)
  • Voltage Detector (2)
  • Voltage, Continuity and Current Tester (2)
  • Water Based Caulk (1)
  • Water Pump Plier (3)
  • Water Pump Pliers (3)
  • Web Strap (4)
  • Wedge Clamp (1)
  • Weld Metal (5)
  • Wire Dispenser (2)
  • Wire Grabber and Lanyard (2)
  • Wire Puller (2)
  • Wire Pulling Glove (2)
  • Wire Stripper (8)
  • Wire Stripper and Cutter (1)
  • Wire Stripper/Cutter (2)
  • Wire Stripper/Wire Cutter (3)
  • Wood Bit (6)
  • Wood Boring Bit (1)
  • Work Gloves (3)
  • Show More...

• Brand

  

  • 3M (5)
  • 3M Electrical Products (13)
  • AMERICAN POLYWATER (5)
  • AMPROBE (2)
  • Appleton (4)
  • ARLINGTON (1)
  • Arlington Industries (2)
  • BOULDER BAG (2)
  • Buchanan (1)
  • BURNDY (20)
  • Cementex (4)
  • CHANNELLOCK (14)
  • CLC Workgear (3)
  • COLOR-KEYED (3)
  • Copper (23)
  • CRC (1)
  • CRC INDUSTRIES (18)
  • CRC Industries, Inc. (10)
  • DEWALT (4)
  • Dewalt/Black & Decker (4)
  • E-A-R (2)
  • Eaton (16)
  • Edge Eyewear (2)
  • FLUKE (28)
  • Fluke Electronics (1)
  • Gardner Bender (3)
  • GREENLEE (114)
  • Greenlee Textron (7)
  • Ideal (136)
  • Klein Tools (424)
  • Knipex (16)
  • Knipex Tools (10)
  • L.H. Dottie CO. (9)
  • LENOX (100)
  • LENOX[R] (5)
  • LENOX[R], Leaders[R] (2)
  • LH DOTTIE (80)
  • Louisville (11)
  • Louisville Ladder (4)
  • M18(TM) (2)
  • milwaukee (1)
  • Milwaukee Electric Tool (12)
  • Milwaukee® (535)
  • Minnesota Mining (3M) (24)
  • Nsi Industries (6)
  • nVent ERICO (4)
  • PANDUIT (1)
  • Peco Fasteners (25)
  • Peco Fasteners, Inc. (22)
  • Platinum Tools (4)
  • PVC & Accessories (5)
  • Quest, Series Pro (3)
  • R (3)
  • Rack-A-Tiers (62)
  • Rectorseal (39)
  • SANTRONICS (2)
  • Scotch-Brite (4)
  • Scotchcast (3)
  • Scotchlok (1)
  • Southwire (26)
  • Specseal (3)
  • SPEED SLOT[R], T3[TM] (3)
  • STA LUBE (1)
  • T&B Ind Fitting (1)
  • T2[TM] (2)
  • Tools & Accessories (6)
  • Show More...

• Material

  

  • 1680d Ballistic Weave (21)
  • 1680d Polyester Body;Hard Molded Polypropylene Bottom (2)
  • ABS (1)
  • ALLOY STEEL (4)
  • Alloy Steel;Steel (3)
  • Aluminum (16)
  • Aluminum/Steel (2)
  • BALLISTIC NYLON (3)
  • Bi-Metal (15)
  • Bi-Metal (Teeth) (2)
  • Bi-Metal Steel (3)
  • Bi-Metal, High Speed Steel (4)
  • Bi-Metal;8% Cobalt;Steel (Teeth) (15)
  • Carbide (6)
  • Carbide (Tip) (15)
  • CARBIDE TIP (4)
  • Carbon Steel (8)
  • CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention (12)
  • Chico (3)
  • CHROME VANADIUM STEEL (12)
  • Cobalt (3)
  • COBALT STEEL (1)
  • Compound (3)
  • Drop-Forged, High-Carbon Steel (3)
  • Ductile Iron (4)
  • FABRIC (1)
  • Fiber Polyline (3)
  • Fiberglass (21)
  • FOAM (1)
  • Forged Steel (2)
  • Glass Filled Polypropylene (2)
  • Hardened Alloy Steel (2)
  • Hardened Steel (8)
  • HEAT TREATED STEEL (2)
  • Heat-Treated High-Carbon Steel (11)
  • High Speed Steel (41)
  • High-Carbon Steel (3)
  • HOT ROLLED STEEL (1)
  • IMPACT RESISTANT POLYMER (7)
  • Induction Hardened Steel (6)
  • IRON (1)
  • JERSEY (1)
  • LEATHER (7)
  • M2 High Speed Steel (8)
  • Metal (9)
  • Metal (Frame);Polycarbonate (Lens) (2)
  • No. 10 Canvas (3)
  • NO. 6 CANVAS (2)
  • No. 8 Canvas (2)
  • Nylon (19)
  • Nylon (Frame) (2)
  • PC/ABS (3)
  • Plastic (5)
  • Plastic (Cartridge) (4)
  • Plastic (Frame);Polycarbonate (Lens) (2)
  • Plastic Case with Steel Blade (4)
  • Plastic Housing, PCB with Electronic Components (2)
  • Plastic/Electronics (2)
  • Polyester (8)
  • Polypropylene (7)
  • Polyurethane (2)
  • Proprietary Steel (18)
  • Punch up to 10 ga mild steel (2)
  • PVC (2)
  • Reinforced Nylon (2)
  • Stainless Steel (18)
  • Steel (200)
  • Thick Steel (2)
  • Tip:Tungsten Carbide (4)
  • Titanium (2)
  • Tough Steel (2)
  • Tungsten Carbide (3)
  • Wood;Bi-Metal (Teeth) (2)
  • Show More...

• Blade Material

  

  • 440A Stainless Steel (4)
  • AUS 8 Stainless Steel (4)
  • Bi-Metal (8)
  • Chrome Vanadium Steel (7)
  • D2 Steel (3)
  • Forged Steel (3)
  • Hardened Steel (2)
  • HSS (2)
  • Micro Carbide Metal (2)
  • n/a (5)
  • Stainless Steel (12)
  • Steel (51)
  • Show More...

• Application

  

  • "Blending, Cleaning, Contour Finishing, Deburring, Finishing" (2)
  • #8 AWG Copper, Aluminum and Other Soft Metals (2)
  • 10-in-1, 11-in-1 and 10-Fold™ Screwdriver/Nut Drivers (2)
  • 58543 (2)
  • 8-16 AWG Solid and 10-18 AWG Stranded Wire (2)
  • Abusive (3)
  • ACSR, Screws, Nails, Most Hardened Wire (11)
  • Air tools, mechanical brakes, clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators & compressors. (2)
  • All Commercial/Industrial (2)
  • Assembly;Cleaning;Demolition;Electrical;Facility Maintenance;Grinding;Machine Operations;Painting;Remediation;Sanding;Welding (4)
  • Bi-Metal Hole Saw with 1-5/8 In cutting depth allowing cutting on 2x4 studs. Extra-thick backplate minimuzes vibration for smoother, easier cutting. (3)
  • Blower;Vacuum System (6)
  • Blowing Directly into Conduit (3)
  • Bolt Applications (11)
  • Bores Clean Holes at any Angle in Wood, Plastic, Plywood and Formica (6)
  • Cable Installation (3)
  • Cable Pulling (3)
  • Cable Stripping (2)
  • Class E (2)
  • Common constructions including concrete floors, concrete walls, concrete block walls, and gypsum board/stud wall assemblies up to 10" (250 mm) thick. (2)
  • Conduit and Pipe (2)
  • Conduit Bending (3)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Construction;Food & Beverage;Pharmaceutical (2)
  • CRIMPING (12)
  • Crimping Lugs/Taps (3)
  • Crimping terminals/splices/disconnects (2)
  • Cuts and Strips Wires (2)
  • Cuts Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16 in (5 mm) Thick (3)
  • CUTTING (1)
  • Dead Ending Self Supporting Drop Wire (2)
  • Designed to withstand impact drills (10)
  • Drilling (27)
  • Drilling Fast Hole in Clean Wood;For Feeding Wire or Bolt (5)
  • Drilling Small and Large-Diameter Holes in Steel and Plastic (7)
  • Each Tap Size Rethreads to Next Larger Size If Threads Are Stripped. (2)
  • Electrical (16)
  • Electrical and Mechanical Connections (2)
  • Electrical Metallic Tubing (EMT) (4)
  • Electricians (4)
  • Electronics (2)
  • Fast Hole Drilling in Clean or Nail-Embedded Wood (7)
  • For 1940 Flexible Metal Conduit Cutter (2)
  • For Aluminum, Brass, Copper, Plastic and Up to 10 Gauge Metal (5)
  • For Bore Hardwood, Softwood, Plywood And Drywall (7)
  • For Bores Clean Holes At Any Angle In Wood, Plastic, Plywood And Formica (5)
  • For Brick, Concrete, Tile, Slate And Cinder Block (7)
  • For Cutting Hardened Wire, Bolts And ACSR (2)
  • For Electricians, Plumbers, Utilities And Any Trade Requiring Fast Hole Drilling In Clean Or Nail-Embedded Wood (3)
  • For Excellent Fishing Performance (2)
  • For General Purpose (2)
  • For General Use (2)
  • For Hickeys (2)
  • For Portable Drills (8)
  • For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. (12)
  • For punching holes in mild steel, aluminum, brass, copper, fiberglass and plastics (3)
  • For securing Contractor, DIY, Landscape Maintenance, recreational loads and more. (11)
  • For Sir Nickless Rotary Armored Cable Cutter (2)
  • For Steel, Steel Forging, Cast Iron and Other Work Materials (9)
  • For Stripping Solid Or Stranded Wire (2)
  • For Use With Any Type Of Blower Or Vacuum System (9)
  • For Used To Seal Up Holes Punched In Panels Or Knockouts From Outlet Boxes (2)
  • For Wire Pulling (2)
  • For Wood Boring (2)
  • For Work Near Energized Sources (5)
  • General Material Handling;Handling Small Part;Electrical Component Assembly;Carpentry;Plumbing;Roofing (3)
  • General Purpose (16)
  • Grounding and Bonding;For Welding Copper to Copper, Copper to Steel, Copper to Rail, Copper to Cast Iron and One for Welding Copper to Steel for Cathodic Protection (3)
  • Handling Abrasive/Sharp Material;Forming;Bending/Machining Sharp Part;Cable Pulling;Wire Handling;Cable Preparation (3)
  • Hard Metal;All Twist Drilling (3)
  • Heavy Duty Impact (3)
  • Heavy Duty Impact;Drilling and Fastening (6)
  • Helps prevent corrosion to electrical equipment located in wet or harsh environments. (2)
  • Hole Drilling;Tapping;Deburring/Countersinking (2)
  • HVAC (4)
  • Impact Protection;Safety;UV Protection (3)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (6)
  • Indoor (3)
  • Industrial (32)
  • INDUSTRIAL, MARINE (1)
  • Linear Measurment (3)
  • Lubricant (2)
  • Lunch, Food Cooler (2)
  • Masonry (2)
  • Measures AC Current (2)
  • Measures AC/DC Voltage (2)
  • Mechanical/Home Repair/Auto/Plumbing (7)
  • Mechanical/Home Repair/Plumbing/Auto (2)
  • Metal Cutting (15)
  • Multi-Purpose (3)
  • Nut Driving on Unlimited Bolt Lengths (2)
  • Nuts and bolts, pins, screws, bushings, clips, hinges, snaps, lugs, caps, locks, washers and sliding mechanisms. (3)
  • Phone Storage (6)
  • Pole Hardware Installation and Removal (5)
  • Pressure-Type Wire Connectors Including Lugs;Taps;Service Entrances and Split Bolts (4)
  • Professional Electrician (2)
  • Punch mild steel, aluminum, fiberglass and plastic (2)
  • PVC (2)
  • PVC Conduit (4)
  • PVC Pipe, Potable Water, Pressure Pipe, Gas, Conduit, Sewer, DWV System (4)
  • PVC and CPVC Pipe Applications such as Potable Water, Pressure Pipe, Gas, Conduit, Sewers and Drain, Waste and Vent (3)
  • PVC, CPVC and ABS Pipe, Tubing, and Socket -Type Fittings (2)
  • Replacement draw stud for use with manual drivers and standard round knockouts. (2)
  • Screw Thread (2)
  • Sealing Fittings and Hubs (5)
  • Slug-Buster® round replacement punch for battery-powered, hydraulic and ratchet drivers. (4)
  • Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics (3)
  • Standard replacement draw stud for use with standard knockout punches. Use with batter-powered, hydraulic, ratchet or manual drivers. (2)
  • Standard round replacement die for use with standard knockout punches. Use with batter-powered, hydraulic, ratchet or manual drivers. (6)
  • Strips 12 AWG Wires (2)
  • Tight Wrench-Over-Wrench Applications (2)
  • Tightening (2)
  • Tool Carrying (2)
  • Tool Storage (2)
  • Use In Brick, Concrete, Tile, Slate, & Cinder Block (3)
  • Use with battery-powered, hydraulic, ratchet or manual drivers. Capacity up to 10 gauge mild steel. Use on mild steel, aluminum, fiberglass and plastic. (13)
  • Use with blower or vacuum power fishing system to start conduit run. (8)
  • UV Protection (3)
  • Water Pump (4)
  • Wire Pulling (7)
  • Wire Stripping and Cutting (6)
  • Wood Cutting (3)
  • Wood Drilling (2)
  • Show More...

• Bit Size

  

  • 1 in (2)
  • 1/2 in (5)
  • 1/2 to 1 in (2)
  • 1/4 in (15)
  • 1/4 to 3/4 in (2)
  • 1-1/2 in (2)
  • 1-1/4 to 6 in;31.8 to 152.4 mm (3)
  • 1-1/8 in (2)
  • 3/16 in (4)
  • 3/16 to 7/8 in (2)
  • 3/4 in (4)
  • 3/8 in (9)
  • 5/16 in (6)
  • 5/8 in (2)
  • 7/8 in (4)
  • 9/16 to 1-3/16 in;14.3 to 30.2 mm (2)
  • Show More...

• Container Capacity

  

  • 1 gal (4)
  • 1 GALLON (1)
  • 1 lb (3)
  • 1 PINT (1)
  • 1 pt (2)
  • 1 qt (10)
  • 1/2 Pint (4)
  • 10.1 oz (2)
  • 10.3 oz (2)
  • 12 oz (2)
  • 16 oz;0.125 gal (2)
  • 2 oz (2)
  • 4 Ounce (2)
  • 5 gal (2)
  • 8 oz (10)
  • Show More...

• Sub Brand

  

  • BRUTE (5)
  • ERICO (4)
  • LASERedge (2)
  • MILWAUKEE (3)
  • RESI-MASTER (3)
  • Scotchcast (2)
  • Secure-Grip (2)
  • Slug-Buster SC® (4)
  • Slug-Buster&#174 (2)
  • Virtua (2)
  • Show More...

• Container Type

  

  • Aerosol Can (7)
  • Bottle (12)
  • Bucket (3)
  • Can (17)
  • Cartridge (3)
  • Dauber Top Bottle (9)
  • Pail (2)
  • Squeeze Bottle (10)
  • Tin (2)
  • Tube (4)
  • Show More...

• Blade Length

  

  • 0 (6)
  • 1/2 in;12.7 mm (Knief Length) (2)
  • 12 (3)
  • 12 in (3)
  • 12 INCH (2)
  • 12.0 (3)
  • 2.25" (5.7 cm) (2)
  • 2.5 in;63.5 mm (2)
  • 2-1/2 in;63.5 mm (3)
  • 25/32 in;19.8 mm (Knief Length) (6)
  • 25/32 in;20 mm (Knief Length) (2)
  • 27 (2)
  • 3 (3)
  • 3.5" (8.9 cm) (2)
  • 35.375 (3)
  • 35.375 in (4)
  • 44.875 (8)
  • 5/8 in;15.9 mm (Knief Length) (4)
  • 6 (4)
  • 6 in (10)
  • 6 in;152.4 mm (2)
  • 6" (15.2 cm) (2)
  • 6.0 (6)
  • 8 in;203 mm (2)
  • 8.0 (2)
  • 9 (2)
  • 9 in (6)
  • 9 in;228.6 mm (2)
  • 9.0 (4)
  • Show More...

• Conduit Size

  

  • 1 in EMT (2)
  • 1/2 in EMT (3)
  • 1/2 in;12.7 mm;3/4 in;19.1 mm;1 in;25.4 mm (3)
  • 1-1/4 in EMT;1 in Rigid;1 in IMC (2)
  • 3/4 in EMT (3)
  • Show More...

• Shank Diameter

  

  • 0.25 (39)
  • 0.250000 (7)
  • 0.375 (10)
  • 0.4375 (4)
  • 0.5 (5)
  • 0.625 (2)
  • 1/2 in (18)
  • 1/2 in;12.7 mm (3)
  • 1/4 (5)
  • 1/4 in (80)
  • 1/4 in hex (20)
  • 3/16 (9)
  • 3/8 in (7)
  • 3/8 in;9.5 mm (2)
  • 7/16 (6)
  • 7/16 in (8)
  • Show More...

• Overall Length

  

  • 1 (5)
  • 1 in (7)
  • 1 INCH (1)
  • 1.265 in (2)
  • 1.5 in;38.1 mm (3)
  • 1.62" (4.1 cm) (2)
  • 1.8" (4.6 cm) (2)
  • 10 in (4)
  • 10 in;254.0 mm (2)
  • 10 INCH (3)
  • 10" (25.4 cm) (4)
  • 10.25" (26 cm) (4)
  • 10.313 (2)
  • 10.75" (27.3 cm) (2)
  • 10-1/4 in;260.4 mm (2)
  • 10-15/16 in;277.8 mm (2)
  • 11 in (2)
  • 11" (27.9 cm) (2)
  • 11.25" (28.6 cm) (2)
  • 11.5" (29.2 cm) (2)
  • 12 in (12)
  • 12 in;304.8 mm (2)
  • 12 INCH (1)
  • 12" (30.5 cm) (3)
  • 12.5" (31.8 cm) (2)
  • 12-1/2 in;317.5 mm (2)
  • 12-1/2 in;318 mm (2)
  • 13.5" (34.3 cm) (4)
  • 14" (35.6 cm) (2)
  • 16 (2)
  • 16.000 IN (406.400 MM) (2)
  • 16-1/4 in;412.8 mm (2)
  • 17 in (2)
  • 17.5" (44.5 cm) (2)
  • 1-7/8 in (7)
  • 1-7/8 to 3 in;47.6 to 76.2 mm (2)
  • 18 (12)
  • 18 in (5)
  • 18 INCH (6)
  • 18.5 in (2)
  • 2 in (2)
  • 2.5 in (7)
  • 2.95 in (3)
  • 2-1/2 INCH (3)
  • 24 in (5)
  • 250 ft (3)
  • 2-9/16 (2)
  • 2-9/16 in (5)
  • 3 in (2)
  • 3.43" (8.7 cm) (2)
  • 3.438" (8.7 cm) (2)
  • 3.5 (6)
  • 3.75" (9.5 cm) (2)
  • 30 in (2)
  • 3000 ft (2)
  • 3-1/2 in (4)
  • 35.375 in (4)
  • 39 (2)
  • 39.0 (2)
  • 4 (6)
  • 4 in (6)
  • 4 INCH (5)
  • 4" (10.2 cm) (3)
  • 4.656 (2)
  • 5 (2)
  • 5 in (3)
  • 5.5" (14 cm) (2)
  • 5.75" (14.6 cm) (2)
  • 51869 (2)
  • 5-3/4 in;146.1 mm (2)
  • 54 (2)
  • 6 (12)
  • 6 in (36)
  • 6 INCH (1)
  • 6.313 (2)
  • 6.5" (16.5 cm) (2)
  • 6.68" (17 cm) (2)
  • 6.75 (5)
  • 6.75 in;171.5 mm (2)
  • 6.75 to 7.3125 (2)
  • 6.75" (17.2 cm) (3)
  • 6.9 (2)
  • 600 ft (2)
  • 6-1/2 in (5)
  • 6-1/4 IN (158.800 MM) (5)
  • 6-1/4 in;158.8 mm (3)
  • 6-1/8 (2)
  • 6-1/8 in;155.6 mm (4)
  • 6-3/4 in;171.5 mm (4)
  • 6-3/8 (2)
  • 7 in (3)
  • 7" (17.8 cm) (2)
  • 7" (17.8 cm) (3)
  • 7.125" (18.1 cm) (2)
  • 7.313 (2)
  • 7.75 (2)
  • 7.75" (19.7 cm) (4)
  • 7-1/2 INCH (2)
  • 7-3/4 in;196.9 mm (4)
  • 8 (2)
  • 8 in (2)
  • 8 in;203 mm (3)
  • 8 in;203.2 mm (3)
  • 8" (20.3 cm) (4)
  • 8.313" (21.1 cm) (3)
  • 8.344" (21.2 cm) (2)
  • 8.5" (21.6 cm) (2)
  • 8.75" (22.2 cm) (2)
  • 8-1/16 in;204.8 mm (3)
  • 8-1/4 in;209.6 mm (2)
  • 8-1/8 in;206.4 mm (3)
  • 8-11/32 in;211.9 mm (3)
  • 8-5/8 in;219.1 mm (2)
  • 8-7/16 in;214.3 mm (2)
  • 8-9/16 in;217.5 mm (2)
  • 9 (2)
  • 9 in (9)
  • 9 in;229 mm (4)
  • 9" (22.9 cm) (3)
  • 9.09" (23.1 cm) (2)
  • 9.35" (23.7 cm) (6)
  • 9.5" (24.1 cm) (2)
  • 9.6 (2)
  • 9.75 (6)
  • 9.75" (24.8 cm) (3)
  • 9-1/2 in;241 mm (2)
  • 9-1/2 in;241.3 mm (5)
  • 9-1/2 INCH (1)
  • 9-3/4 (2)
  • 9-3/4 in;247.7 mm (4)
  • 9-3/8 in;238.1 mm (2)
  • 9-7/64 in;231.4 mm (2)
  • Show More...

• Physical Form

  

  • Fibrous Material (2)
  • Gas (2)
  • Gel (7)
  • Liquid (22)
  • Paste (7)
  • Paste;Solid (2)
  • Powder (3)
  • Solid (4)
  • Show More...

• Cutting Capacity

  

  • #19 to #23 AWG (2)
  • 1 in (2)
  • 10-22 AWG Insulated and Non-Insulated Terminals (2)
  • 2-1/8 in;54 mm (2)
  • 3/4 in (2)
  • Show More...

• Handle Type

  

  • CHANNELLOCK BLUE® grips for comfort (12)
  • Color-Coded Handles (3)
  • CUSHION GRIP (21)
  • Cushioned Rubber Grip (4)
  • Cushion-Grip (6)
  • Dipped, Comfort-Grip, Vinyl Coated (2)
  • Double Dipped for Comfort Grips (2)
  • Ergonomic (10)
  • Multi-Position (9)
  • No Handle (7)
  • Palm Grip (5)
  • Rotary (2)
  • Skeleton (2)
  • Slim (4)
  • Standard (2)
  • Straight (8)
  • Textured Non-Slip Santoprene Grips Cushion (2)
  • Vinyl-Coated, Comfort-Grip, Dipped (2)
  • Show More...

• Drive Type

  

  • Hex (9)
  • Hex (Input);Square (Output) (2)
  • Magnet Nut Driver (18)
  • Phillips (15)
  • Slotted (3)
  • Square (8)
  • Square Recess (2)
  • Torx (5)
  • Show More...

• Base Type

  

  • Lithium (2)
  • Petroleum (6)
  • Petroleum Distillate (3)
  • Polyurethane (3)
  • Solvent (2)
  • Show More...

• Cutting Material

  

  • C1080 High Carbon Steel (5)
  • Mild Steel (2)
  • Show More...

• Handle Material

  

  • 1680D ballistic material (2)
  • 1680D Ballistic Weave (3)
  • Aluminum (3)
  • Anodized Aluminum (6)
  • Canvas (2)
  • Cushion Grip (2)
  • Cushion Grip Handle (2)
  • Fiberglass (8)
  • Glass-filled Nylon (2)
  • Heavy-Duty Rubber (2)
  • High-Dielectric Plastic (7)
  • Journeyman (2)
  • Non-Slip Plastic Coated (3)
  • Plastic (21)
  • Plastic Dipped Steel (7)
  • Plastic Grip (7)
  • Rubber (42)
  • Stainless Steel (2)
  • Steel (11)
  • Show More...

• Handle Length

  

  • 3 (2)
  • 3.43" (8.7 cm) (2)
  • 38 (2)
  • 4 (2)
  • 4.03" (10.2 cm) (4)
  • 4.25 (2)
  • 4.45" (11.3 cm) (2)
  • 4.7" (11.9 cm) (3)
  • 4.73" (12 cm) (3)
  • 4.74" (12 cm) (2)
  • 4.75" (12.1 cm) (2)
  • 4.8" (12.2 cm) (3)
  • 48 (6)
  • 5 (3)
  • 5.41" (13.7 cm) (10)
  • 5.5 (3)
  • 5.55" (14.1 cm) (6)
  • 6.5 (2)
  • Show More...

• Composition

  

  • Cement;alumina;chemicals;Bassanite (calcium sulfate hemihydrate);Haturite (tricalcium silicate) (2)
  • Methyl Ethyl Ketone;Tetrahydrofuran;Cyclohexanone;Acetone (8)
  • Mineral Wool Fiber (Slag Wool Fiber);Mineral Oil (2)
  • Show More...

• Number Of Blades

  

  • 1 (4)
  • 3 (2)
  • 6 (2)
  • Show More...

• Outside Diameter

  

  • 0.375 (2)
  • 1/4 in (Rope) (3)
  • Show More...

• Includes

  

  • (3) 5' (1.5 m) Glow Rods with Bullet Nose and Hook Attachments (2)
  • Instruction Manual;4 Millimeter Detachable Probes;TP1 Test Probes;Continuity Beeper;Low Battery Indicator;Flexible Lead (2)
  • Soft and Adjustable Nose Bridge;Soft-Tipped Temple (2)
  • ULT110 Ultimate Connect-A-Pouch;530 Hammer Holder;ULT120 Ultimate Electrician Tool Pouch;500 Comfort Belt with QRB (2)
  • Show More...

• Color

  

  • Aluminum (3)
  • Amber (6)
  • Black (36)
  • Black (Handle) (21)
  • Black and Orange (3)
  • Black Gloss (2)
  • Black Oxide (16)
  • Black with Orange/Gray (2)
  • BLACK, YELLOW (1)
  • Black/Orange (3)
  • Black/Orange/Gray (4)
  • Black/Red (2)
  • BLACK/YELLOW (4)
  • Black;Gold (2)
  • Black;Red;Yellow;Green;Blue;Brown (handle) (2)
  • Blue (16)
  • Brown (4)
  • Brushed Nickel (Frame) (2)
  • Camouflage (4)
  • Channellock Blue (Handle) (5)
  • Clear (15)
  • Clear (Temple) (2)
  • Clear Blue (3)
  • Colorless (8)
  • Gray (26)
  • Green (4)
  • Light Amber (2)
  • Light Blue/Black (Handle) (4)
  • Light Gray (3)
  • Maroon (2)
  • Natural (2)
  • Natural/Brown (2)
  • Orange (7)
  • Pale Yellow (2)
  • Purple (4)
  • Red (20)
  • Red (Handle) (2)
  • Red/Black (4)
  • Red;Black (Handle) (3)
  • Reddish (2)
  • Rope:Yellow (4)
  • Silver (5)
  • Silver (Handle) (3)
  • Tan (4)
  • Transparent Red (Handle) (2)
  • White (11)
  • White and Blue (2)
  • WHITE GLOSS (1)
  • Yellow (13)
  • Yellow (Handle) (11)
  • Yellow and Black (Handle) (2)
  • Yellow/Black (2)
  • Yellow;Black (2)
  • Yellow;Black (Handle) (9)
  • Show More...

• Tensile Strength

  

  • 1125 (2)
  • 1250 (2)
  • 1250 lb (2)
  • 210 (2)
  • 2430 (3)
  • 2500 lb (3)
  • 400.000 LB (1.700 KN) Maximum Design Strength (2)
  • 500 (2)
  • Show More...

• Odor

  

  • Bland (2)
  • Faint Petroleum (2)
  • Mild (5)
  • Mild Odor (3)
  • Mild petroleum (4)
  • Odorless (2)
  • Petroleum (3)
  • Pleasant (2)
  • Pungent Odor (9)
  • Slight (7)
  • Slight ethereal (2)
  • Slight Perfume (3)
  • Solvent (4)
  • Show More...

• Teeth Per Inch

  

  • 10 (2)
  • 14 (4)
  • 18 (13)
  • 24 (5)
  • 32 (2)
  • 5 (3)
  • 6 (25)
  • 8 (11)
  • Show More...

• Tip Size

  

  • #0 (1)
  • #1 (4)
  • #2 (14)
  • #2;1/4 in (2)
  • #3 (2)
  • 1/4 in;6.4 mm (4)
  • 1/4" (6.4 mm) (5)
  • 1/4", 5/16" (3)
  • 1/8 in;3.2 mm (2)
  • 1/8" (3.2 mm) (2)
  • 3/16 in;4.8 mm (3)
  • 3/16" (4.8 mm) (5)
  • 5/16 in;7.9 mm (4)
  • Phillips:#0, #1, #2, #3, Square:#0, #1, #2, #3, Slotted:#4, #6, Star:T10, T15, T20, T25 (2)
  • Show More...

• Finish

  

  • Aluminum (3)
  • Black (2)
  • Black Oxide (18)
  • Black/Gold (11)
  • Blue (3)
  • BROWN (1)
  • Brushed Nickel (2)
  • CHROME (1)
  • Chrome Plated (3)
  • Cobalt Coated (2)
  • Cobalt Titanium Coated (5)
  • Gray Atramentized (2)
  • Green (2)
  • Journeyman (Handle) (13)
  • Nitrile Foam Coated (7)
  • Plastic Dipped (Handle) (16)
  • Polished Black Oxide (2)
  • POLISHED CHROME (2)
  • Red (4)
  • SATIN (2)
  • YELLOW (2)
  • Zinc Plated (2)
  • Show More...

• Overall Height

  

  • 0.5 in (5)
  • 0.5" (1.3 cm) (2)
  • 0.75" (1.9 cm) (13)
  • 1 in (3)
  • 1.19" (3 cm) (2)
  • 1.5" (3.8 cm) (2)
  • 1.55" (3.9 cm) (2)
  • 1.75" (4.5 cm) (2)
  • 10" (25.4 cm) (2)
  • 10" (25.4 cm) (4)
  • 12" (30.5 cm) (2)
  • 16" (40.6 cm) (2)
  • 17" (43.2 cm) (2)
  • 2.88" (7.3 cm) (2)
  • 3.43" (8.7 cm) (2)
  • 5.5 in;13.97 cm (3)
  • 6.5" (16.5 cm) (6)
  • 6.75" (17.2 cm) (2)
  • 7" (17.8 cm) (4)
  • 7" (17.8 cm), 5.5" (14 cm) (2)
  • 9.75" (24.8 cm) (2)
  • 91.475 in (Open Height);97.727 in (Closed Height) (2)
  • Show More...

• Lubricant Type

  

  • Aqua-Gel II (3)
  • Clearglide (3)
  • Electrical, Multi-Purpose (2)
  • Non-drying (2)
  • Penetrating Oil (2)
  • Thin, Non-Drying (4)
  • Yellow 77 (2)
  • Show More...

• Special Features

  

  • "Shear-cut" bolt cutters;Color-coded for quick reference (solid wire - yellow, stranded wire -red);Narrow plier nose is perfect for holding and twisting wires in hard-to-reach places;Non-slip Santoprene textured grips;Plier nose for holding and twisting wires;Pocket-Locket locks even tighter when tool is slipped into holster or pants pocket for added safety;Shear-cut bolt cutters slice through bolts easily and cleanly;Textured non-slip Santoprene grips cushion your hand to reduce stress in wrist while wick (2)
  • (5) Steps Adjustments, Permalock[R] Fastener, Right Angle Teeth, Reinforced Edge (2)
  • (7) Steps Adjustments, Permalock[R] Fastener, Right Angle Teeth, Reinforced Edge (2)
  • 16-Foot Reach;Attachment Channel to Tether Tape Measure;Double-Sided Blade Printing;Easy-to-Read Bold Lines Every 1/8-Inch;Tough Blade (2)
  • 3 AWG SIMpull HEAD(R) Pulling Device;Patented Gripping System (5)
  • 350 KCMIL SIMpull HEAD(R) Pulling Device;Patented Gripping System (5)
  • 4 AWG SIMpull HEAD(R) Pulling Device;Patented Gripping System (4)
  • 40% Slimmer Jaws (2)
  • 500 KCMIL SIMpull HEAD(R) Pulling Device;Patented Gripping System (4)
  • 600 KCMIL SIMpull HEAD(R) Pulling Device;Patented Gripping System (4)
  • A Precise Manufacturing Process Creates A Sharper Cutting Edge On Each Tooth For A Faster Cutting Blade;A Thicker, More Rigid Blade Body Resists Fracturing And Bending For Maximum Durability;A Unique Combination Of Relief Angles Forms A Radius On The Back Of The Tooth That Reduces Stress Build-Up During Cutting And Substantially Extends Blade Life;Matrix Ii Bi-Metal Teeth For Greater Durability;Package Quantity: 5;Shank: 1/2 IN Universal;The 1 IN Tall Blade Body Reduces Blade Twisting For Straighter, More (3)
  • Anti-oxidant and anti-seizing compound improves efficiency and service life of aluminum-to-aluminum and aluminum-to-copper electrical connections; Suspended zinc particles penetrate and cut aluminum oxide; Provides additional interstrand and inter-conductor current paths for improved conductivity and cooler connections; Carrier material excludes air to prevent further oxidation; Reduces galling and seizing and promotes good ground continuity on aluminum conduit joints; Improves service life of aluminum ele (4)
  • Attach to a suitable line to serve as a piston - clears out water or debris as they travel through conduit; Durable foam construction for repeated use and long life (9)
  • Attach to A Suitable Line to Serve As A Piston - Clears Out Water Or Debris As They Travel Through Conduit;Durable Foam Construction For Repeated Use and Long Life (6)
  • Chain Tape Thong (2)
  • Clear and colorless for quick and easy clean-up; Exceptional lubricity for super-fast pulls; Polymer-based formula perfect for all electrical and datacom applications; Safe to use with all cable types; Remains stable over wide temperature range; Dries to a semi-fluid film that won't clog conduit; Clings to cable throughout long pulls; Easy to apply by hand, brush, or pump; Environmentally safe - non-toxic, non-flammable, and non-corrosive (3)
  • Clover Design Features Four Different Sizes in One Tool (2)
  • Color-Accented Temples, Rubber Temple Tips, Soft Rubber Nose Bridge, Wide Viewing Area (2)
  • Comfortable Belt System with Thick Closed Cell Foam (2)
  • Compact and Lightweight (6)
  • Complete kit including wall labels., Offered in three sizes: 1in., 2 in., & 4 in. diam., Sized for assemblies up to 10 in. thick., Oversized escutcheon plates and gaskets available for larger openings. (2)
  • Constructional Feature Abrasion Resistant;Standard Package 1 (4)
  • Convenient Chart on the Tester (2)
  • Crimper (2)
  • Crimping Die Behind Hinge For Superior Leverage Crimping Non-Insulated Connectors, Lugs and Terminals. (2)
  • Cushion Grip (2)
  • Cuts Acsr, Screws, Nails and Most Hardened Wire. (2)
  • Cuts through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8 In cut to go through wood studs. Extra-tough bi-metal blade made of highest grade tool steel. Steam oxide finish for cooler running saw. Extra-thick backplate minimizes vibration. (3)
  • Double Relief Angle Reduces Tooth Stress For Long Life;Matrix Ii Bi-Metal Teeth For Greater Durability;Package Quantity: 5;Precision Forming Process Creates Sharper Teeth For Fast Cutting;Shank: 1/2 IN Universal (4)
  • Double Wing Spurs For Easy Hole Formation; Patented Cutting Edge For Fast, Easy Wood Boring; 1/4 IN Quick-Change Hex Shank For Use In All Universal QUIK-LOK Extensions (2)
  • Dry File Lubricant (2)
  • Features Low Battery Indicator (2)
  • Features: Aluminum Tool Features 12 Ton Fully Articulating Head - 360 ¦ Capability, Only One Tool Required for all Dies to 6", Laser Etched Markings on Die Cups for Precise Location, Dies Require 50 Less Torque than Competitive Dies, 3 Point Die Design - (2)
  • Features: Assembled, Includes Screw and Threaded Strap (2)
  • Features: Ductile Iron Construction For Added Durability; Heat-Treated For Extra Strength Reinforced At Stress Points For Longer Life; Precision-Located Degree Scale, Star, Arrow And Rim Notch For Perfect Bends Every Time; Markings Raised And Cast Into Bender Body On Both Sides For Easy Visibility; Deeply Serrated Step Helps Prevent Slippage When Applying Maximum Leverage; Grooved Internal Hook Surface Helps Prevent Conduit From Slipping; Flat Hook Surface Provides Stable Starting Point; Lifetime Replaceme (3)
  • Features: Extra Strength, Reduced Breakage, Heat Treated, Resist Breakage and Wear, Specially Designed to Reduce Stripping (3)
  • Features: Fits Y35, Y39, Y750HS, PAT750, PAT750XT-18V, PAT46-18V, Y46 (With PUADP-1 Adapter) (2)
  • Features: Heat Treated For Long Life, Self Feeding Screw Point, 2 Recesses Provided for Extensions (2)
  • Features: Heavy Duty Jobber Length, 3 Flats on Sizes 3/16" and Larger (2)
  • Features: High Gloss, Will Not Chip or Peel (2)
  • Features: High Quality, Good Visibility, Durable (2)
  • Features: Industrial Quality, Heavy Duty Jobber Length, Fractional Sizes (9)
  • Features: Magnetic (3)
  • Features: Minimum Breaking Strength of 261 LB Per DTH6950-1, Safe From Electrical Shock, Does Not Absorb Moisture, Resists Industrial Chemicals, Ergonomically Designed Grip (4)
  • Features: No-Slip Ergonomic Design Maximizes Comfort; Premium Neon Lamps Prevent False Readings; Tough Impact-Resistant Case; Tests For Correct Wiring, Open Ground, Reverse Polarity, Open Hot, Open Neutral, Hot On Neutral, Hot And Ground Reversed With Open Hot In 3-Wire, 125V AC Circuits; 2-Year Warranty; Warranty: 2 year (2)
  • Features: Palm Saving Rotation Cap, Rotating Balance Point Collar, Spring Loaded Ball Bearing Bit, Full Length Solid Steel Shaft, Retracting Bit Storage, High Impact Triax Housing, 59+ Rockwell Hardness (2)
  • Features: Polypropylene, Safety Yellow (2)
  • Features: Premium Quality Suede Leather Palm Work Gloves, Breathable Spandex Back, Keystone Thumb with Gusset Stitching, Stretchable Lycra Side Panels, Knit Wrist for a Snug Fit (2)
  • Features: Self Feeding Point, Flexible Spring Steel Shaft (2)
  • Features: Tempered Body for Long Life, Slow Spiral, Suitable for Rotary or Percussion, For Brick, Concrete, Tile, Slate and Cinder Block (7)
  • Features: Tri-Cut Tip Cuts Smoother, Faster And Cooler, "Plier Tite" Tip Fit (5)
  • Features: Water-Tight Seal (2)
  • Features: Weatherproof, 750 LB Test Webbing, Strong 1 IN Heavy Duty Web Construction, Rustproof, Cam-Action Buckle, For Securing Contractor DIY, Landscape Maintenance, Recreational Loads (11)
  • Features:Ductile Iron Construction For Added Durability;Heat-Treated For Extra Strength Reinforced At Stress Points For Longer Life;Precision-Located Degree Scale, Star, Arrow and Rim Notch For Perfect Bends Every Time;Markings Raised and Cast Into Be (3)
  • Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers (2)
  • Flame Retardant and Impact Resistant Handle (5)
  • For ferrous and non-ferrous metals, sulfur-free. Foaming (2)
  • For use with new Greenlee KRW-1 high-leverage ratchet wrench. Slug-Buster® punch profile splits slugs for easy slug removal. Knurled edge on punches for better grip. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Punches, dies and case made in the USA. Draw stud manufactured in the USA from US and global components. (2)
  • Forms a dam between the integral bushing of the sealing fitting and the end of the conduit and around the electrical conductors entering the hub (3)
  • Forms a seal around each electrical conductor and between them and inside of the sealing fitting to restrict the passage of gases, vapors or flames th (3)
  • Fully Insulated, High-Dielectric, Glass-Filled Polypropylene Construction (2)
  • Heat Treated;Precision Machined (2)
  • High Wrap Lenses for a Greater Viewing Area;Spatula-Styled Temples with Soft Tips Look Cutting-Edge Modern (2)
  • Includes core wire stripper/cutter;Wire looping and bending holes;Precision-ground stripping holes for easy removal of insulation;Easy-to-read wire gauge markings on both sides for stripping in either direction;Black-oxide finish resists corrosion (3)
  • Induction Hardened Tip For Added Nail Durability; Coated Flutes For Fast Chip Removal; Impact Rated Shank (9)
  • Industrial Strength, Low Viscosity (2)
  • Industry's only interchangeable replacement blades. Strong durable back plate. Use with power drill to cut large diameter holes for recessed lighting fixtures. (2)
  • Klein Tools' Interchangeable Multi-Bit Screwdrivers/Nut Drivers Are Heavy-Duty Tools Designed For Professionals. They Are Made Of The Highest-Quality Tempered Steel With A Torque-Proof Anchor In The Handle. Strong, Durable Tips Are Manufactured With Squar (2)
  • Knife Snap (3)
  • Kwiko A sealing cement is a specially formulated water soluble powder; Mixed to the proper proportions, it is poured in sealing fittings and hardens to contain and restrict the passage of gases and explosions in classified areas; Ratio: 2 parts cement to 1 part water (2)
  • Max/Min, Hold and Average Functions; Auto Power Off (2)
  • Metal Temples with Soft Rubber Tips;Soft Nose Bridge (2)
  • Narrow profile design for working in tight areas; Drop-forged, high-carbon steel construction; Induction-hardened blades; Serrated jaws provide secure gripping surface; Knife-to-anvil blades never need resharpening; Vinyl-coated, comfort-grip handles; Lifetime guarantee (2)
  • No Flash or Fire Point (2)
  • Non-Sliver Surface can be Handled without Gloves;will not Stretch, Rot or Mildew;Rugged, Lightweight Construction (4)
  • Oil-tempered spring steel for excellent fishing performance. Dirt-free tape finish keeps hands cleaner during use. Advanced comfort handle grip reduces fatigue. Superior rapid tape pay-out and rewind. Smaller Fish Eye with offset bend for improved fishing ability. Improved low profile tip for easy fishing through all sizes of conduit. Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly. Rugged case design improves drop impact capability. Flared case with Grip Ridges (2)
  • Patented Magnet Track Secures the Level to Any Metal Surface (2)
  • Penetrates through rust and corrosion (2)
  • Perfect For the Trade Apprentice Starting Out (2)
  • Plastic Safe (2)
  • Plastic Safe, General Purpose (2)
  • Polymer-based formula provides maximum tension reduction in high-stress electrical and communication cable-pulling operations; Compatible with all cable types except composite rubber; Cleans up easily with soap and water; Clings to cable throughout long pulls; Remains stable over wide temperature range; Dries to a semi-fluid film that won't clog conduit; Easy to apply by hand, brush, or pump; Environmentally safe - non-toxic, non-flammable and non-corrosive; For outdoor use only (2)
  • Precision Knurl (5)
  • Precision-ground teeth cut smooth, burr-free holes with ease. Split point pilot drill prevents walking making accurate hole placement easy. Spring-loaded slug ejector saves time. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel. (5)
  • Proprietary Steel and Heat Treat Process For Maximum Strength and Durability;Strong Magentic Tip For Secure Grip;Color-Coded Band For Easy Size Identification;Chamfered Edge For Fastening In Tight Spaces;Package Quantity:1 (5)
  • Quick Clamping-Requires No Adjustment After Initial Setting (2)
  • Ratcheting Mechanism (2)
  • Rotating Cap for Optimum and Precise Control (2)
  • Safe on Most Plastics (2)
  • Saves Conductor - Drop Wire May Be Cut to Exact Length (2)
  • Secure Tongue and Groove Design For Non-Slip Grip - Even With Heavy Pressure. (2)
  • SHOX imapct absorption system, ProTop -versatile & durable, Da Boot, Double Rivet Step Construction (3)
  • Slide Drive™ (3)
  • SmoothStart pilot drill prevents carbide damage by gradually guiding cutter to material; Precision-ground carbide teeth for fast cutting of clean, round holes; Designed specifically for sheet metal cutting, even stainless-steel; Over drill flange built-in to prevent penetration beyond the sheet metal (4)
  • Straight Jaw (6)
  • Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection. Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate cutting with less force. Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required. Flange Stop – eliminates over-drilling. Slug Ejector Spring – quick, easy slug removal Cuts round, burr-free holes (3)
  • Tenite Plastic for Slip-Resistant Grip and Comfort (2)
  • Tested up to 20kV (2)
  • The #1 brand of wire pulling lubricant since 1959 - the perfect general purpose lube; Wax-based formula provides superior lubricity; Safe to use with most cable types except low-density polyethylene and semi-conducting jackets; Won't break down or separate after repeated exposure to freezing temperatures; Dries to a thin, non-conductive film that won't clog conduit; Clings to cable throughout long pulls; Easy to apply by hand or with pump; Creamy texture applies easily and uniformly; Homogeneous blend requ (3)
  • Thunderbolt Web, Provides Longer Life And Faster Driller Times; Parabolic Flute, Clears Chips Faster; 135 DEG Degree Split Point, Precision Start No Walking; Point Type: Split Point; Flute Type: Parabolic; Drill Point: 135 DEG (8)
  • Tip-Ident Quickly Identifies Nut Driver Size (4)
  • to splice solid dielectric and oil-filled cables up to 8 kV (2)
  • Touchscreen Capability on Index Finger;Non-Slip Grip (2)
  • Tough, Durable Rubber Feet Protect from the Elements (2)
  • Tough, durable rubber feet protect from the elements. (4)
  • Translucent White (2)
  • Use Gloves with Even Greater Cut, Puncture and Tear Resistance (3)
  • Use with blower or vacuum power fishing system to pioneer the line through the conduit run. Flexible foam body for an air-tight seal. Color-coded end disk with embossed size marking for fast easy selection. Strong steel center rod with loops on both ends. Pistons available for all types and sizes of conduit 1/2" - 6". (8)
  • Washable;Light, Flexible, Abrasion-Resistant and Long Lasting (3)
  • Will Not Rot or Mildew;Can Be Left in Conduit for Future Use (2)
  • Wrench Assist for Greater Torque (2)
  • Show More...

• Overall Width

  

  • 0.02 in (4)
  • 0.5 in (5)
  • 0.5 in;12.7 mm (2)
  • 0.75 in (10)
  • 1 in;25.4 mm (4)
  • 1.25" (3.2 cm) (2)
  • 1.476 in (2)
  • 1.5" (3.8 cm) (4)
  • 1.6 in (2)
  • 1.88" (4.8 cm) (2)
  • 10.7" (27.2 cm) (2)
  • 2" (5.1 cm) (9)
  • 2.06" (5.2 cm) (8)
  • 2.25" (5.7 cm) (3)
  • 2.29" (5.8 cm) (2)
  • 2.3" (5.8 cm) (2)
  • 2.35" (6 cm) (4)
  • 3.81" (9.7 cm) (2)
  • 3/4 in;19 mm (3)
  • 4.25" (10.8 cm) (2)
  • 4.656" (11.8 cm) (2)
  • 5.5 in;13.97 cm (3)
  • Show More...

• Dielectric Strength

  

  • 350 (2)
  • 51,300 (2)
  • Show More...

• Number Of Pieces

  

  • 1 (16)
  • 10 (5)
  • 11 (2)
  • 12 (3)
  • 13 (2)
  • 14 (1)
  • 15 (3)
  • 16 (2)
  • 2 (12)
  • 21 (1)
  • 3 (7)
  • 32 (1)
  • 4 (9)
  • 5 (5)
  • 6 (7)
  • 7 (10)
  • 8 (3)
  • 9 (2)
  • Show More...

• Specific Gravity

  

  • <1.0 (3)
  • 0.6694 (2)
  • 0.82 (3)
  • 0.89 (2)
  • 0.91 (6)
  • 0.98 (8)
  • 1 (2)
  • 1.04 (5)
  • 1.09 (3)
  • 1.1 (2)
  • 1.25 (2)
  • 1.27 (2)
  • 1.62 (2)
  • 3 (4)
  • Show More...

• For Use With

  

  • 10-in-1 Screwdriver Driver (32477);11-in-1 Screwdriver Driver (32500);10-Fold(TM) (2)
  • 4-in-1 Electronics Screwdriver (32581, 32585) (2)
  • Battery Ignition System (4)
  • Cell Phones with Cases up to 6.25" x 3.5" x 0.75" (15.88 x 8.89 x 1.9 cm) (2)
  • Clip;Speciality Probe (2)
  • Conduit (2)
  • For Use With Any Type Of Blower Or Vacuum System (6)
  • Professional Electrician (2)
  • Tool Belts (3)
  • Show More...

• Package Quantity

  

  • 1 (48)
  • 1 (Per Pack);5 (Per Carton) (3)
  • 1 BX (2)
  • 1 ct (146)
  • 1 CT;12 PK (3)
  • 1 CT;3 PK (3)
  • 1 CT;4 Pk (2)
  • 1 CT;5 PK (3)
  • 1 CT;6 Pk (11)
  • 1 Pc (4)
  • 1 PK (77)
  • 10 CA (2)
  • 10 CT (6)
  • 10 Master CT (5)
  • 10 PK (3)
  • 100 (2)
  • 12 CA (2)
  • 12 CT (22)
  • 12 PK (12)
  • 12 PK;1 CT (3)
  • 2 (2)
  • 2 Bits (9)
  • 2 PK (2)
  • 20 CA (7)
  • 20 Cartridge/BX (3)
  • 20 PK;1 CT (7)
  • 24 PK (2)
  • 25 Bulk PK (3)
  • 25 PK (3)
  • 3 (8)
  • 3 CT (2)
  • 3 PK (7)
  • 4 CT (5)
  • 4 PK;1 CT (2)
  • 5 (12)
  • 5 PK (22)
  • 5 PK;1 CT (9)
  • 6 CT (22)
  • 6 Pair/BG (7)
  • Show More...

• Battery Size

  

  • AAA (2)
  • Battery Packs (2)
  • Show More...

• Weight

  

  • 0.01 lb (3)
  • 0.015 (2)
  • 0.02 lb (3)
  • 0.025 (2)
  • 0.026 lb (2)
  • 0.03 lb (6)
  • 0.030000 (2)
  • 0.04 lb (3)
  • 0.044 lb (2)
  • 0.05 lb (7)
  • 0.06 lb (7)
  • 0.07 lb (6)
  • 0.08 lb (10)
  • 0.09 lb (5)
  • 0.090 LB (40.800 GM) (2)
  • 0.1 lb (9)
  • 0.10 lb (0.05 kg) (3)
  • 0.10 oz (2.8 g) (4)
  • 0.11 lb (5)
  • 0.12 lb (2)
  • 0.13 lb (6)
  • 0.14 lb (5)
  • 0.15 lb (5)
  • 0.15 lb;0.07 kg (3)
  • 0.16 oz (4.5 g) (4)
  • 0.17 lb (5)
  • 0.18 lb (4)
  • 0.19 lb (7)
  • 0.2 lb (4)
  • 0.20 lb;0.09 kg (4)
  • 0.21 lb (5)
  • 0.22 lb (4)
  • 0.23 lb (4)
  • 0.25 lb (6)
  • 0.25 lb;0.11 kg (6)
  • 0.26 lb (4)
  • 0.26 lb;0.12 kg (2)
  • 0.27 lb (2)
  • 0.27 lb;0.12 kg (3)
  • 0.28 lb (4)
  • 0.29 lb (3)
  • 0.3 lb (6)
  • 0.3 oz (8 g) (2)
  • 0.30 lb;0.14 kg (3)
  • 0.31 lb (4)
  • 0.32 lb (4)
  • 0.33 lb (2)
  • 0.35 lb (3)
  • 0.35 lb;0.16 kg (2)
  • 0.37 lb (3)
  • 0.38 lb (2)
  • 0.4 lb (4)
  • 0.41lb;0.19 kg (2)
  • 0.44 lb (3)
  • 0.45 lb (3)
  • 0.5 lb (3)
  • 0.50 lb;0.23 kg (3)
  • 0.50 oz (14.2 g) (5)
  • 0.53 lb (2)
  • 0.54 lb (2)
  • 0.55 lb (2)
  • 0.56 lb (2)
  • 0.6 lb (2)
  • 0.60 lb;0.27 kg (2)
  • 0.61 lb (2)
  • 0.64 lb (3)
  • 0.64 lb;0.29 kg (2)
  • 0.67 lb (2)
  • 0.7 lb (2)
  • 0.75 lb (3)
  • 0.8 oz (23 g) (2)
  • 0.80 lb (2)
  • 0.80 lb;0.36 kg (2)
  • 0.80 oz (22.7 g) (3)
  • 0.9 oz (26 g) (2)
  • 1 lb (7)
  • 1.0 lb (0.5 kg) (10)
  • 1.1 lb (0.5 kg) (5)
  • 1.1 lb;0.5 kg (6)
  • 1.1 oz (31 g) (2)
  • 1.1 oz;31 g (2)
  • 1.13 lb (2)
  • 1.2 lb (2)
  • 1.2 lb (0.5 kg) (5)
  • 1.25 lb (2)
  • 1.27 lb (3)
  • 1.3 lb (0.6 kg) (3)
  • 1.32 lb (2)
  • 1.45 lb (2)
  • 1.5 lb;0.68 kg (2)
  • 1.5 lb;0.7 kg (5)
  • 1.5 oz;43 g (2)
  • 1.6 oz (45 g) (10)
  • 1.6 oz;45 g (2)
  • 1.7 lb (2)
  • 10 lb (2)
  • 10.1 oz (286 g) (3)
  • 10.2 oz (290 g) (2)
  • 10.4 lb (2)
  • 12.5 lb (2)
  • 13.6 oz;386 g (2)
  • 14 lb (3)
  • 14.4 oz (408 g) (2)
  • 14.7 oz (417 g) (2)
  • 15 lb (4)
  • 18 lb (2)
  • 2 lb (3)
  • 2.31 lb (2)
  • 2.4 oz (68 g) (2)
  • 2.4 oz;68 g (2)
  • 2.5 oz;71 g (2)
  • 28.25 lb (2)
  • 3 oz (86 g) (2)
  • 3.2 oz (91 g) (16)
  • 3.2 oz;91 g (2)
  • 3.7 oz;104 g (2)
  • 300 g (2)
  • 395 g (2)
  • 4 oz (113 g) (13)
  • 4.0 oz (113 g) (4)
  • 4.3 lb (2.0 kg) (2)
  • 4.4 lb (2)
  • 4.5 lb (2.0 kg) (2)
  • 4.6 oz (132 g) (2)
  • 4.8 oz (136 g) (9)
  • 5.1 oz (145 g) (2)
  • 5.3 oz (150 g) (2)
  • 5.4 oz (154 g) (2)
  • 5.6 oz (159 g) (6)
  • 6.2 oz (177 g) (3)
  • 6.4 oz (181 g) (2)
  • 7.0 oz (187 g) (2)
  • 8 oz (227 g) (3)
  • 8.0 lb (3.6 kg) (2)
  • 8.5 lb (3)
  • 8.5 oz (241 g) (2)
  • 8.58 lb (2)
  • 8.6 oz (245 g) (2)
  • 8.95 lb (2)
  • 9 lb (2)
  • 9.6 oz (272 g) (3)
  • 9.6 oz;272 g (7)
  • 9.8 oz;278 g (2)
  • Show More...

• Flash Point

  

  • <0 (2)
  • 147 (2)
  • -17 °C;+4.1 °F (2)
  • -17°C;+4.1°F (7)
  • 192 (2)
  • 310 °F (4)
  • None (6)
  • Show More...

• Drive Size

  

  • 1/4 (2)
  • 1/4 in (6)
  • 1/4 IN Hex (2)
  • 1/4 in;5/16 in (3)
  • 1/4” and 5/16” (2)
  • 5/16 (2)
  • 5/16 in;1/4 in (2)
  • Show More...

• Number Of Vials

  

  • 3 (4)
  • 4 (4)
  • Show More...

• Package Type

  

  • Bag (6)
  • Carton (29)
  • CASE (1)
  • Industructo Box (2)
  • Spool (5)
  • Show More...

• Jaw Length

  

  • 1" (2.5 cm) (2)
  • 1.91" (4.9 cm) (6)
  • 1-19/32 in;40.5 mm (6)
  • 1-19/32 in;41 mm (2)
  • 1-19/32 INCH (1)
  • 13/16 in;20.6 mm (7)
  • 2-3/16 in;55.6 mm (2)
  • 2-5/16 in;58.7 mm (4)
  • 78211624164 (2)
  • Show More...

• Voltage Rating

  

  • 1000 V (1)
  • 120 (3)
  • 18 V (4)
  • 1k V (2)
  • 50 to 1000 V ac (3)
  • 600 (4)
  • 600 V ac (2)
  • CAT IV 600 V / CAT III 1000 V safety rating (2)
  • Show More...

• Jaw Width

  

  • 0.47 in;11.94 mm (2)
  • 0.5 in;12.7 mm (2)
  • 0.688" (1.7 cm) (4)
  • 1 in;25.4 mm (7)
  • 1.24" (3.1 cm) (2)
  • 1.25 in;31.8 mm (2)
  • 1.25" (3.2 cm) (7)
  • 1-1/14 in;32 mm (2)
  • 1-1/4 in;31.8 mm (6)
  • 1-1/4 INCH (1)
  • 1-3/16 in;30.2 mm (7)
  • Show More...

• Shank Type

  

  • 1/4" Hex (17)
  • 3-FLAT (2)
  • 7/16 IN Hex (10)
  • HEX (7)
  • Hexagonal (7)
  • Round (40)
  • Round Rapi-Driv® (2)
  • Square (4)
  • STRAIGHT (7)
  • Show More...

• Diameter

  

  • — (2)
  • 0.25 (4)
  • 0.375 (2)
  • 1-1/4 INCH (1)
  • 2-1/2 INCH (1)
  • 3/16 in;4.8 mm (2)
  • 7/8 INCH (1)
  • Show More...

• Length

  

  • 0.55 (2)
  • 1 (16)
  • 1.875 (4)
  • 1.88 (9)
  • 10 (8)
  • 10" (2)
  • 100 (2)
  • 11 (2)
  • 11.7 (2)
  • 12 (11)
  • 12" (2)
  • 13 (2)
  • 13.0 (4)
  • 13.63 (2)
  • 14 (3)
  • 15 (5)
  • 1500 ft (2)
  • 16 (2)
  • 16" (2)
  • 18 (14)
  • 2 (17)
  • 2.13 (4)
  • 2.2 (4)
  • 2.5 (7)
  • 2.63 (15)
  • 200 (2)
  • 203 mm (2)
  • 21.0 (5)
  • 23.0 (2)
  • 249 mm (2)
  • 25 (3)
  • 3 (8)
  • 3.5 (7)
  • 3000 (4)
  • 3000 ft (2)
  • 4 (5)
  • 5.62 (5)
  • 50 (2)
  • 500 (4)
  • 6 (31)
  • 6 in (2)
  • 6.0 (28)
  • 6.5 (3)
  • 6.8 (2)
  • 6.9 (2)
  • 6-1/2" (2)
  • 7 (2)
  • 7 INCH (1)
  • 7200 (3)
  • 8 (11)
  • 8.0 (4)
  • 9 (10)
  • 9 INCH (2)
  • 9-1/2" (2)
  • Show More...

• Shank Length

  

  • 1.297 (2)
  • 1.5" (3.8 cm) (3)
  • 3 in;76.2 mm (3)
  • 3" (7.6 cm) (3)
  • 4 (4)
  • 4 in;101.6 mm (10)
  • 4" (10.2 cm) (7)
  • 6 (3)
  • 6 in;152.4 mm (5)
  • 6" (15.2 cm) (5)
  • 7 in;177.8 mm (2)
  • 7" (17.8 cm) (3)
  • 8" (20.3 cm) (5)
  • Show More...

• Operating Temperature Range

  

  • +40 to +100 °F (8)
  • -20 to +300 °F (2)
  • -40 to +165 °F (2)
  • Maximum of +300 °F (2)
  • Show More...

• Width

  

  • 0.5 (4)
  • 0.75 (4)
  • 1 (6)
  • 1/2 (3)
  • 1-1/2 (2)
  • 16.1 (2)
  • 2.3 (2)
  • 2.5 in;6.35 cm (2)
  • 2.75 (2)
  • 3 (2)
  • 3.5 (2)
  • 3.9 (2)
  • 3/4 (6)
  • 4 INCH (1)
  • 51 mm (2)
  • 6 INCH (1)
  • 7 INCH (1)
  • Show More...

• Thickness

  

  • 025 (3)
  • 35 (3)
  • 42 (3)
  • 5 (2)
  • 62 (2)
  • Show More...

• Category Description

  

  • ABRASIVES (5)
  • ADHESIVES (47)
  • AEROSOLS (16)
  • BITS, BLADES, AND HOLE SAWS (665)
  • CLEANING (25)
  • Comp & Mech Lugs and Butt Splices (4)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (5)
  • EXOTHERMIC GROUNDING PRODUCTS (7)
  • FASTENERS (6)
  • Fire Resistant/Protection Materials (14)
  • Fuses & Fuse Accessories (27)
  • HAND TOOLS (671)
  • HAZARDOUS LOCATION FITTINGS (8)
  • HVACR Chemicals (8)
  • Job Site & Safety Apparel (88)
  • LADDERS (15)
  • Miscellaneous residential devices (7)
  • Pin & Sleeve Devices (2)
  • POWER TOOL ACCESSORIES (6)
  • POWER TOOLS (52)
  • PULL LINE, ROPE, CARRIERS (44)
  • SAFETY PRODUCTS (4)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (11)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (2)
  • SPLICE KITS (6)
  • SPLIT BOLTS (4)
  • STEEL BOXES & COVERS (2)
  • STEEL JUNCTION BOXES (2)
  • TAPE (7)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (66)
  • TOOL BAG/POUCHES (84)
  • TOOL BAG/POUCHES ACCESSORIES (Belts, Pads, etc.) (16)
  • WIRE LUBE, MARKERS, & TIES (25)
  • WIRE NUTS (1)
  • Show More...

• Type

  

  • ACCU-BEND™ Conduit and Pipe (2)
  • ALLIGATOR CLIP (1)
  • Aluminum (2)
  • Anchor (3)
  • Anti-Oxidant Compound (4)
  • Apprentice Tool Set (2)
  • BAG (1)
  • Bi-Metal Hole Saw (3)
  • Box Accessories (3)
  • Box Joint (5)
  • Cable Cutter (5)
  • Cable Cutters (2)
  • Carbide Hole Cutter (2)
  • carbide rotary (3)
  • Carbide Tipped Hole Cutter (3)
  • Carbide-Tipped Hole Cutter (3)
  • Cleaning Tools (2)
  • Closed Case, Double Sided, Magnetic Hook (3)
  • COMPACT (2)
  • CONSTANT PITCH (3)
  • Construction Marking Paint (2)
  • CORDLESS HAMMERDRILL/DRIVER (1)
  • CORDLESS HAMMERDRILL/DRIVER, RECIPROCATING SAW (1)
  • Crimper (2)
  • Degreaser (2)
  • Demolition (5)
  • Diagonal Cutting Pliers (14)
  • DIE (5)
  • Dies (4)
  • Digital Thermometer (2)
  • Double Entry, Cross Step (4)
  • Drill Kit (2)
  • Ductile Iron (8)
  • ELECTRICIAN (1)
  • Electricians Tool Set (2)
  • ELECTRONIC (2)
  • Extra Slim Adjustable Wrench (2)
  • Fiber sealing compound (3)
  • Fire Barrier Moldable Putty Pads MPP (2)
  • Firestop Sleeve (2)
  • FLAT (2)
  • Flex A Bit (2)
  • Foam Carrier (15)
  • Foam conduit piston for IMC and Rigid (3)
  • Foam piston for all conduit types (5)
  • Folding Set (3)
  • Garden Tool (2)
  • Gel (2)
  • General Purpose Hand Pad (2)
  • General Use (3)
  • GFCI and Standard Receptacle Tester (2)
  • Hack Saw (3)
  • HAND (2)
  • Heavy (2)
  • HEAVY DUTY (4)
  • HEX (9)
  • hex chuck (2)
  • Hex Driver (4)
  • Hi Speed Drill (5)
  • High Leverage Side Cutting/Connector Crimping Pliers (2)
  • High Speed Drill (9)
  • High-Leverage Diagonal-Cutting Pliers (2)
  • Hole Saw (3)
  • Hollow (4)
  • Hybrid Gloves (2)
  • Hydraulic Punch Kit (2)
  • INSULATING (1)
  • Ironworker's Pliers (3)
  • Jobber Drill (2)
  • Large Cable (2)
  • Light Weight (3)
  • Lockout (2)
  • Long Nose Pliers (2)
  • Long Nose Side Cutting Pliers (8)
  • Long Ship (3)
  • Long Ship Anger Bit (2)
  • Long Ship, Heavy-Duty (3)
  • Long-Nose Pliers With Cutter (2)
  • Lubricant (13)
  • MAGNETIC (3)
  • Magnetic Hex Tool (6)
  • MANUAL (1)
  • Manual Crimp Tool (3)
  • Manual Tool (2)
  • Masonry Drill (7)
  • MEDIUM (7)
  • Non-Contact (2)
  • Other enclosure accessories (2)
  • Paste (2)
  • Penetrating (2)
  • Penetrating Solvent (2)
  • Phillips, Phillips Head Screws (3)
  • Phone Holder with Belt Clip (6)
  • Pilot drill bit (3)
  • POCKET (2)
  • Pocket Knife (4)
  • Powder (3)
  • Precision Adjustable Wrench (5)
  • Precision Cleaner (2)
  • Protective Eyeware (2)
  • Pull Line Measuring Tape (6)
  • Pull Rope (2)
  • pull tape (4)
  • PVC Low VOC Cement #99 (2)
  • RATCHET (1)
  • RECESSED (1)
  • Recessed Light Hole Saws (2)
  • REGULAR (1)
  • Replacement (4)
  • Replacement Blade (4)
  • Replacement Die (2)
  • Replacement Die for SPEED PUNCH® Knockout Punches (3)
  • Replacement Die for standard round knockout punches (8)
  • Replacement Draw Stud (2)
  • Replacement Manual Draw Stud ball bearing (2)
  • Replacement Punch for SPEED PUNCH® Knockout Punches (2)
  • Replacement Punch for standard round knockout punches (3)
  • Replacement Standard Round Die (6)
  • Replacement Tap (2)
  • Replacement, Round (7)
  • Resin Splice (2)
  • RIGHT ANGLE (1)
  • ROOF FLASHING (5)
  • Rope (5)
  • Rust Proof Paint (2)
  • SAFETY (2)
  • Safety Glasses (3)
  • SCREW (4)
  • Screwdriver Set (2)
  • Sealants & Lubricants (2)
  • Sealing Cement (2)
  • Sealing Compound (8)
  • SHIP (16)
  • Shovel (4)
  • Side Cutting Pliers (10)
  • Silicone Grease (2)
  • Silicone Lubricant (2)
  • Slim Electronics (2)
  • SMALL (1)
  • Soft Sided (3)
  • SOLID (1)
  • SPEED PUNCH® replacement die (2)
  • SPEED PUNCH® replacement punch (3)
  • STANDARD (1)
  • Standard IN (3)
  • Step Drill Bit (2)
  • STUBBY (12)
  • T IA (3)
  • Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, Cyclohexanone (2)
  • Thread Cutting Lubricant (2)
  • Thread Lubricant (3)
  • THREADED (1)
  • Three Piece Knockout Seal (2)
  • Tip Bit (5)
  • Tongue & Groove, Pump Plier, Water Plier, Tools (11)
  • Tool Backpack (2)
  • Torpedo (3)
  • Tubing Cutter (2)
  • Type 1 (3)
  • Type IA (2)
  • Type IAA (5)
  • Ultra Cutter Hole Saw (5)
  • UNCORDED (1)
  • Web Strap (11)
  • Wedge Clamps (2)
  • Wire Stripper (10)
  • Show More...

• Size

  

  • #1 (3)
  • #2 (4)
  • #2 PHILLIPS, 1/4 INCH SLOTTED (1)
  • .25 (2)
  • 1 (9)
  • 1 in (3)
  • 1/2 (2)
  • 1/2 in (5)
  • 1/2 INCH (2)
  • 1/2" (2)
  • 1/4 (4)
  • 1/4 INCH (2)
  • 10 - 18 AWG Solid, 12 - 20 AWG Stranded (3)
  • 10" Tongue & Groove (2)
  • 1-1/2 in (2)
  • 1-1/4 in (3)
  • 12 (2)
  • 12" Tongue & Groove (2)
  • 16 (18)
  • 16.5" Tongue & Groove (2)
  • 2 in (3)
  • 20 (7)
  • 3 (2)
  • 3/4 (2)
  • 3/4 in (3)
  • 3/4" (3)
  • 3/8 INCH (1)
  • 3/8 x 1-5/8 In Draw Stud for Manual Drivers (2)
  • 30.5 MM (1)
  • 5 (3)
  • 5-16 Inch (2)
  • 6 (3)
  • 6 - 14 AWG Solid, 8 - 16 AWG Stranded (2)
  • 6.5" Tongue & Groove (2)
  • 7/8 IN (2)
  • 8 (3)
  • 8 Ounce (3)
  • 9.5" Tongue & Groove (2)
  • Extra Large (5)
  • L=12 - Diameter=2.375 (2)
  • Large (8)
  • Medium (3)
  • One Size (10)
  • One Size Fits Most (3)
  • Small (3)
  • Square: 3/4", 13/16", 1", 1-1/8"; Hex: 9/16", 3/4" (2)
  • X-Large (2)
  • Show More...