Narrow By:

• Material:PVC

• Category Description

  

  • ALL PLASTIBOND FITTINGS (15)
  • ANCHORS & ANCHOR KITS (2)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (1)
  • BOX SUPPORT (4)
  • CABLE & PIPE TRANSITS (4)
  • CADDY (STRAPS ONLY) (6)
  • CONDUIT HANGERS/STAND OFF STRAPS (2)
  • CORD CONNECTORS & CORD GRIPS (380)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (6)
  • Datacom Wiring Devices and Accessories (4)
  • DIECAST EMT FITTINGS (10)
  • EMT STRAPS (1)
  • FASTENERS (4)
  • FLEX & MC FITTINGS (216)
  • FLEX & MC STRAPS (5)
  • FORM 5 CONDULETS, COVERS, & GASKETS (89)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (19)
  • Fuses & Fuse Accessories (28)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (1)
  • Industrial cord connectors (2)
  • Liquid Tight (2)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (9)
  • METALLIC FITTINGS (248)
  • MISC FITTINGS (5)
  • Miscellaneous commercial & industrial devices (2)
  • NON-METALLIC FITTINGS (96)
  • NON-METALLIC SEALTITE AND FITTINGS (6)
  • PVC & ENT (1)
  • PVC CONDULETS (2)
  • RIGID STRAPS & CLAMPBACKS (1)
  • ROMEX CONNECTORS (20)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (24)
  • SLB'S & JAKE ELL'S (4)
  • Stainless Steel EMT Conduit (4)
  • STEEL BOXES & COVERS (2)
  • STEEL EMT FITTINGS (10)
  • WEATHERPROOF BOXES & COVERS (3)
  • Show More...

• Brand

  

  • Abb Installation Products, Inc (2)
  • American Fittings Corp (9)
  • Amfico (43)
  • Appleton (73)
  • Appleton/Oz Gedney (2)
  • ARLINGTON (46)
  • Arlington Industries (85)
  • Arrow Hart (3)
  • Bridgeport (144)
  • Bridgeport Fittings (84)
  • CALBRITE (5)
  • Carlon (7)
  • COOPER WIRING DEVICES (3)
  • Crouse-Hinds (3)
  • Eaton (123)
  • EATON CROUSE-HINDS SERIES (140)
  • Eaton Wiring Devices (9)
  • Erico, Inc. Eritec-Caddy (1)
  • Flexible Conduit (3)
  • Hubbell Wiring Devices (23)
  • KILLARK (31)
  • LEGRAND-PASS & SEYMOUR (4)
  • LH DOTTIE (5)
  • Meltric (1)
  • NIEDAX INC. (1)
  • nVent CADDY (11)
  • O-Z/GEDNEY (12)
  • Pass & Seymour (1)
  • Pass & Seymour/Legrand (1)
  • Pass and Seymour (16)
  • Peco Fasteners (2)
  • PLASTIBOND (28)
  • PLASTI-BOND (2)
  • RACO (3)
  • Remke (2)
  • Remke Industries (28)
  • SNAP 2 IT (7)
  • Southwire (1)
  • Southwire Rough Electrical Com (8)
  • Star Teck (2)
  • Steel City (12)
  • SUPERFLEX LTD. (15)
  • T&B Fittings (1)
  • T&B Ind Fitting (197)
  • T&B Liquidtight Fittings (5)
  • Tiffin Insulators CO. (2)
  • WIRING DEVICE-KELLEMS (41)
  • Show More...

• Manufacturer Status

  

  • Inactive (6)
  • Non-Stock (30)
  • Show More...

• Temperature Rating

  

  • 105?°C (29)
  • -25 To 40 Deg C (61)
  • -25 To 60 Deg C (17)
  • -25° to 40°C (1)
  • 250 (5)
  • -40 to + 60 Degrees C (10)
  • 90 (9)
  • 90?°C (4)
  • Show More...

• Number Of Conductors

  

  • 1 (16)
  • 1 Cable (16)
  • 2 (2)
  • Single (44)
  • up to 6 max (1)
  • Show More...

• Connection Type

  

  • 90° (1)
  • Clamp-On (9)
  • Combination (3)
  • FMC (11)
  • Grip (10)
  • Liquidtight (6)
  • Liquid-Tight (6)
  • NPT (9)
  • Push-In (1)
  • Screw (7)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (1)
  • Set Screw (3)
  • Single Screw Strap-Type (2)
  • Snap-In (9)
  • Snap-On (2)
  • Squeeze (16)
  • Straight (45)
  • Straight Male (46)
  • Straight Male NPT (9)
  • Threaded (113)
  • Threaded Hub (8)
  • Threaded x Push In (6)
  • Threaded x Screw (2)
  • Threaded x Screw-In (11)
  • U Shaped (1)
  • Show More...

• Finish

  

  • #4 Polished Finish (5)
  • Aluminum (6)
  • As Cast (2)
  • Ball burnish (50)
  • Ball Burnished;Mirror Smooth (44)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Black (6)
  • Caddy?® Armour (6)
  • Chromate, Epoxy Powder Coat/Zinc Electroplated (11)
  • Electro Zinc Plated/Chromate Coating (34)
  • Electro Zinc Plated-Chromate Coated (1)
  • Electro-galvanized (1)
  • ELECTROGALVANIZED (17)
  • Electrogalvanized With Aluminum Acrylic Painted (10)
  • Electrogalvanized With Aluminum Acrylic Painted (Body), Electrogalvanized With Chromate Treatment (Nut) (1)
  • Electrogalvanized With Chromate Treatment (3)
  • Gray (3)
  • Green Colored (1)
  • Metallic (3)
  • Molded (3)
  • Molded;Electro Zinc (Locknut) (2)
  • Natural (8)
  • Nickel (2)
  • Nickel Plated (5)
  • NO FINISH (13)
  • nVent CADDY Armour (3)
  • Plain (10)
  • Plastic (1)
  • Pre-Galvanized (2)
  • PVC Exterior Coating;Urethane Interior Coating (1)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • Silver (18)
  • Smooth (1)
  • STAINLESS STEEL (2)
  • Unfinished (2)
  • Untreated (25)
  • white (2)
  • Zinc (1)
  • Zinc Coated (1)
  • Zinc Electroplate (3)
  • Zinc Electroplated (105)
  • Zinc Electro-Plated (1)
  • Zinc Electroplated With Chromate Coated (39)
  • Zinc Electroplated/Chromate Coating (53)
  • Zinc Electroplated;Chromate And Epoxy Powder Coat/Zinc Electroplate (2)
  • Zinc Plated (68)
  • Zinc Plating/Clear Chromate (8)
  • Show More...

• Enclosure Type

  

  • Class I Div 2;Class II Div 1 and 2;Class III;NEMA 3R (8)
  • Class I Div 2;NEMA 3R (6)
  • Class I Div 2;NEMA 3R;NEMA 4;NEMA 4X (22)
  • Nema 4 (24)
  • NEMA 4/4X/12/13 (18)
  • NEMA 6 and 4X (4)
  • NEMA FB-1 (14)
  • Type 4 / 4X (1)
  • Type 4X (3)
  • Show More...

• Color

  

  • /;Brown (1)
  • /;Gray (1)
  • /;Green (1)
  • /;Orange (1)
  • /;Pink (2)
  • /;Purple (2)
  • /;Yellow (1)
  • Beige (3)
  • Black (21)
  • Blue (10)
  • Bronze (1)
  • Brown (8)
  • Brown/Clear (1)
  • Clear (2)
  • Color Yellow (1)
  • Eaton Crouse-Hinds (2)
  • Gray (84)
  • Gray (Exterior Coating);Red (Interior Coating) (3)
  • Gray (Standard);Black (Optional) (3)
  • Gray;Grey (2)
  • Green (15)
  • Ivory (1)
  • Jet Black (1)
  • MALLEABLE IRON (86)
  • Metallic (45)
  • Natural with red union nut (10)
  • Orange (2)
  • Orchid (2)
  • Pink (2)
  • Polished Silver (5)
  • PRE-GALV (1)
  • Pre-Galvanized (Finish) (1)
  • Purple (6)
  • Red (11)
  • Red;Silver (2)
  • Silver (86)
  • Silver (Spring) (2)
  • White (23)
  • White with Clear cover (3)
  • White/Clear (Cover) (1)
  • Yellow (8)
  • Yellow (Handle) (1)
  • Zinc Plated (Finish) (1)
  • Show More...

• Material

  

  • 2 MIL Red Urethane Aluminum (Interior), 40 MIL Gray PVC Aluminum (Exterior) (2)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (10)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (13)
  • 316 Stainless Steel (6)
  • Aluminum (71)
  • Aluminum (Body);Copperfree Aluminum (Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (6)
  • Aluminum (Body, Gland Nut, Lock Nut);Steel (Ferrule);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (1)
  • Aluminum Body and Gland Nut, Neoprene Seal (3)
  • Aluminum Body, Copper Plated Stainless Steel Spring, Neoprene Seal (1)
  • Aluminum Body, Neoprene Seal (5)
  • Aluminum Die-Cast (1)
  • Aluminum Fittings, Galvanized Steel Mesh (4)
  • Brass (1)
  • Bronze (Bridge);Paintable Plastic (Cover) (1)
  • Cast Zinc (2)
  • Copperfree Aluminum (6)
  • Die Cast Zinc (15)
  • Die-Cast Zinc (59)
  • Die-Cast Zinc and Steel;Non-Metallic (Insulator) (3)
  • Die-Cast Zinc Spring Steel;Plastic (Bush) (1)
  • Electrogalvanized Steel (Body/Nut);Natural/Neoprene (Bushing) (13)
  • EPDM RUBBER (1)
  • Feraloy Iron Alloy Body and Gland Nut, Neoprene Seal (8)
  • Feraloy Iron Alloy Body, Steel Gland Nut, Neoprene Seal (1)
  • Feraloy Iron Alloy with Electrogalvanized and Aluminum Acrylic Paint (Body/Gland Nut);Neoprene (Bushing) (4)
  • FERROUS (5)
  • Galvanized Steel (7)
  • Galvanized Steel (Strand);Bronze (Equalizer);Aluminum (Eye);Mylar (Tag) (2)
  • Gray Nylon (6)
  • Halogen Free Polyamide (1)
  • IRON (1)
  • Iron;Malleable (4)
  • Machined Aluminum (3)
  • Machined Steel (Body/Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (2)
  • Malleable Iron (126)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body);Steel (Cap, Ferrule);Polypropylene (Sealing Ring) (1)
  • Malleable Iron (Body);Steel (Ferrule, Caps);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Cap);Aluminum (Ferrule);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (29)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Malleable Iron, PVC Grommets (9)
  • Natural Copper Free Aluminum (Body);Neoprene (Grommet);Nylon (Retention Ring) (1)
  • Neoprene Rubber (2)
  • Non-Metallic (11)
  • Nylon (21)
  • Nylon 6/6 (1)
  • Plastic (34)
  • Plastic/Zinc (1)
  • Plated Steel (2)
  • Polyamide 6 (Body, cap);Neoprene (Sealing Ring) (1)
  • Polyamide/Nylon 6.6 (4)
  • Polypropylene (2)
  • Porcelain (2)
  • Porcelain, Steel (2)
  • Porcelain;Steel (Clip) (1)
  • Pre-Galvanized Steel (1)
  • Stainless Steel (11)
  • Stainless Steel - 304 (5)
  • Stainless Steel (Mesh);Aluminum (Fitting) (2)
  • Stainless Steel (Strand);Aluminum (Body, Nut);Neoprene (Bushing) (1)
  • Stainless Steel (Strand, Eye, Equalizer);Mylar (Tag) (1)
  • Steel (99)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel (Body/Compression Nut/Sleeve);Neoprene (O-Ring);Nylon (Ferrule);Stainless Steel (Wire Mesh) (1)
  • Steel (Mesh);Aluminum (Threaded Body);Neoprene (Gasket) (3)
  • Steel Body and Gland Nut, Neoprene Seal (10)
  • Steel Body, Aluminum Gland Nut, Neoprene Seal (2)
  • Steel with Zinc Electroplate and Chromate Finish Coat (Body, Gland Nut);Neoprene (Bushing) (24)
  • Steel, Zinc Plated (3)
  • Steel/malleable iron (1)
  • Steel;Polyethylene (Seal) (1)
  • Steel;Zinc plated Steel (Ground Cones);Thermoplastic Nylon (Seal Rings);Thermoplastic Nylon (Heat Curled Insulators);Malleable Iron (1)
  • Thermoplastic (25)
  • Tin Coated Bronze (1)
  • Turned Steel Body and Gland Nut, Neoprene Seal (1)
  • UV-Rated Plastic (36)
  • Zinc (51)
  • Zinc (Bridge);Paintable Plastic (Cover) (2)
  • Zinc Cast (14)
  • Zinc Die Cast (54)
  • Zinc Die Cast Body with Steel Saddle Clamps and Insulated Throat (1)
  • Zinc Die-Cast (3)
  • Zinc Electroplated Steel (4)
  • ZINC PLATED STEEL (2)
  • Show More...

• Trade Size

  

  • 0 (1)
  • 0.5 (10)
  • 0.75 (5)
  • 0-50 (1)
  • 1 (29)
  • 1 1/2 IN (5)
  • 1 1/4 in (7)
  • 1 in (24)
  • 1 INCH (5)
  • 1 pipe (1)
  • 1.25 (2)
  • 1.5 (3)
  • 1/2 (26)
  • 1/2 in (54)
  • 1/2 INCH (6)
  • 1-1/2 (15)
  • 1-1/2 in (17)
  • 1-1/2 in;35 mm (1)
  • 1-1/2 INCH (3)
  • 1-1/4 (15)
  • 1-1/4 in (13)
  • 1-1/4 INCH (3)
  • 1-1/4 to 3 (1)
  • 2 (10)
  • 2 1/2 in (7)
  • 2 in (30)
  • 2 INCH (4)
  • 2 pipe (1)
  • 2.5 (2)
  • 2.5 in (1)
  • 2-1/2 (8)
  • 2-1/2 IN (7)
  • 2-1/2 INCH (1)
  • 3 (11)
  • 3 1/2 (2)
  • 3 1/2 in (2)
  • 3 in (14)
  • 3 INCH (2)
  • 3.5 (1)
  • 3/4 (15)
  • 3/4 in (54)
  • 3/4 in NPT (1)
  • 3/4 INCH (8)
  • 3/8 (19)
  • 3/8 in (23)
  • 3/8/2015 (1)
  • 3-1/2 (4)
  • 4 (7)
  • 4 in (11)
  • 4 pipe (1)
  • Show More...

• Insulation Type

  

  • Non-Insulated (16)
  • UNINSULATED (2)
  • Show More...

• Construction

  

  • Die-Cast (8)
  • ONE PIECE (1)
  • Support and Strain Relief Grips, Various Types of Pulling (11)
  • Various Types of Pulling, Support and Strain Relief Grips (10)
  • Woven (11)
  • Show More...

• Thread Size

  

  • 0.5 (1)
  • 0.63 in (4)
  • 0.66 in (1)
  • 0.72 in (1)
  • 1 in (21)
  • 1 in NPT (9)
  • 1/2 in (37)
  • 1/2 in NPT (11)
  • 1/2 in;12.7 mm (1)
  • 1/2 Inch Threaded (1)
  • 1-1/2 in (3)
  • 1-1/2 in NPT (8)
  • 1-1/4 in (2)
  • 1-1/4 in NPT (6)
  • 1-1/4 in;31.8 mm (1)
  • 2 in (3)
  • 2 in NPT (10)
  • 2-1/2 in NPT (3)
  • 3 in NPT (5)
  • 3/4 in (32)
  • 3/4 in NPT (11)
  • 3/4 in;19 mm (1)
  • 3/8 in NPT (3)
  • 4 in NPT (3)
  • Show More...

• Type

  

  • 1-Hole AC/MC Strap (10)
  • 1-Hole Aluminum Strap (2)
  • 1-Hole Steel Strap (1)
  • 2 Screw Connector (1)
  • 45 DEG (1)
  • 45 Degree (7)
  • 45 Degree Liquidtight Non-Insulated Connector (3)
  • 90 DEG (2)
  • 90 Deg Angle Conduit Connector (8)
  • 90 DEG Connector (2)
  • 90 Deg Liquid Tight Conduit Connector (1)
  • 90 DEG Liquidtight Strain Relief Connector (1)
  • 90 Degree (9)
  • 90 Degree Liquidtight Non-Insulated Connector (6)
  • 90 degree, uninsulated, liquidtight and Type B (1)
  • 90° Male (2)
  • 90º Cord Connector (2)
  • ADAPTER (1)
  • Anti-Short Bushing (1)
  • Brackets and Hangers (1)
  • Bullet-45 Degree (4)
  • Bullet-90 Degree (5)
  • Bullet-Straight (6)
  • Bus drop support grip (3)
  • BUSHING (5)
  • Cable Caps (2)
  • Cable Connector (4)
  • Cable Entry (1)
  • Cable fastener and support (3)
  • Cable gland (89)
  • Cable gland bushing (2)
  • Cable Stacker (1)
  • Cable Strap (1)
  • Cable Support (2)
  • Cable To Beam Fastener (1)
  • Cable/Conduit to Stud (2)
  • Clamp type connector (9)
  • Clamp-On Entrance Cap (2)
  • Closed Mesh, Wide Range (1)
  • Concrete Pipe Sleeve (3)
  • CONDUIT CONNECTOR (1)
  • CONNECTOR (162)
  • Connectors (4)
  • Connectors-45 Degree (15)
  • Connectors-90 Degree (28)
  • Connectors-Straight (31)
  • Cord Connectors-Straight (1)
  • Cord grip (19)
  • Cord Grips (12)
  • COUPLING (8)
  • Double Screw (1)
  • Duplex Snap-In (1)
  • Dust Tight (5)
  • Entrance Caps (10)
  • E-Z LOCK (3)
  • Flexcor® Deluxe Strain Relief Cord Grip - Straight Male (5)
  • Flexcor® Pulling Grip Junior-Duty - Flexible Eye (1)
  • Flexcor® Support Grip Bus Drop - Closed Mesh, Single Eye (3)
  • Flexcor® Support Grip Standard-Duty - Closed Mesh, Single Eye (5)
  • Flexcor® Turnlok®/EHU Strain Relief Grip (2)
  • Floor Box (1)
  • Grounding Connector-90&deg, (1)
  • Grounding Connectors-45 degree (11)
  • Grounding Connectors-90 degree (11)
  • Grounding Connectors-Straight (15)
  • Heavy Duty Grounding Bridge (1)
  • Hit Lock Connectors (1)
  • Hood and Plate (2)
  • Insulated, Wide Range (1)
  • Liquidtight connector (114)
  • Liquidtight Fittings (12)
  • Liquidtight Flexible Metal Conduit Fittings (1)
  • Liquidtight Flexible Non-Metallic Conduit (4)
  • Liquidtight Sealing Gasket (6)
  • Liquidtight Sealing Ring (8)
  • Low Profile In Box (6)
  • Low Profile Inbox (1)
  • Low Profile Strain Relief Cord Connector (1)
  • LTMN (2)
  • Mast Kit (2)
  • MC/AC Cable Supports (1)
  • MC/AC Cable to Stud (3)
  • Metallic Liquidtight Fittings (3)
  • Multi-run cable carrier (2)
  • NAIL PLATE (1)
  • Non-Insulated, Wide Range (3)
  • Offset Eye (1)
  • One Hole Service Entrance Strap (1)
  • One Hole Strap (1)
  • One Hole Straps (2)
  • One hole, push on, AC/MC Cable (1)
  • PolyTuff® Non-Metallic Liquidtight Fittings (1)
  • Push-In Connector (31)
  • Push-In Connectors (1)
  • Raintight (2)
  • Raintight Compression (2)
  • Rod/Wire (1)
  • Saddle Connector (2)
  • Sconce Box (4)
  • Screw In Connector (3)
  • Screw in connector, uninsulated, flex (1)
  • Screw-in Snap-Tite Connector (1)
  • Sealing Gasket Assembly for Liquidtight Flexible Metal Conduit Connectors (2)
  • Self-retaining gasket (6)
  • Service entrance cap (1)
  • Set Screw Couplings & Connectors (1)
  • Single Barrel, Cut In Double-Snap (1)
  • Single Barrel, Double-Snap (1)
  • Single Eye (6)
  • Single Screw Strap Type (1)
  • SINGLE WEAVE (1)
  • Snap Clips (2)
  • Snap Close Clamps (2)
  • Snap-In "U" Shaped, Strapped (1)
  • Snap-on (22)
  • Squeeze Connector (7)
  • Squeeze Connectors (7)
  • Squeeze type connector (10)
  • ST Series 45 DEG Liquidtight Connector With Plain Throat (3)
  • ST Series 90 DEG Liquidtight Connector With Plain Throat (13)
  • ST Series Straight Liquidtight Connector With Plain Throat (13)
  • Standard support grip (4)
  • STB Series Straight Liquidtight Connector With Insulated Throat (2)
  • Steel Cord Grips (10)
  • Steel Strain Relief Connector (2)
  • STNM Series 90 DEG Liquidtight Connector (5)
  • STNM Series Straight Liquidtight Connector (6)
  • STRAIGHT (12)
  • Straight Conduit Connector (1)
  • Straight Cord Connector (11)
  • Straight Liquid Tight Conduit Connector (1)
  • Straight Liquidtight Non-Insulated Connector (7)
  • Straight Liquidtight Strain Relief Connector (17)
  • STRAIGHT MALE (33)
  • Straight Male Thread (8)
  • Straight Squeeze Connector (2)
  • Strain relief deluxe cord grip (1)
  • Strain relief dust tight grip (7)
  • Strain relief I-Grip (2)
  • Teck Cable Fittings (2)
  • Type 4Q Liquid Tight 45 DEG Connector (1)
  • Type 4Q Liquid Tight 90 DEG Connector (1)
  • Type 4Q Liquid Tight Straight Connector (1)
  • Type B Liquidtight Tubing & Fittings (5)
  • Type SR Gold Seal Strain Relief Straight Connector (9)
  • UF Connectors (2)
  • Universal Straps (1)
  • Weatherproof Conduit Hub (2)
  • Wire Holder (5)
  • Wire Mesh Strain Relief (2)
  • Wiremesh Grips (5)
  • Zinc Fitting (1)
  • Show More...

• Mounting

  

  • 1 inch NPT (3)
  • 1/2 inch NPT (3)
  • 2 inch NPT (1)
  • 3/4 inch NPT (3)
  • Between Enclosure and Conduit (4)
  • Consult the Factory for Mounting Recommendations (21)
  • Horizontal Or Vertical - Nail-On To Wood Studs (1)
  • Locknut or Tapped Hole (7)
  • Locknut or Tapped Opening (44)
  • Mounts in either horizontal or vertical direction. (1)
  • Push In (6)
  • SCREW (1)
  • Screw Hook or Beam Clamp (4)
  • Screw or Nail fastening (1)
  • Snap In Mount (2)
  • Show More...

• Cable Type

  

  • AC, MC, Flex (1)
  • AC/MC (3)
  • Non-Metallic Cable (1)
  • Various Types of Electrical Conductor/Cable (21)
  • Show More...

• Used On

  

  • Flexible Non-Metallic Liquidtight Tubing (1)
  • Liquid Tight Conduit (3)
  • Liquidtight Conduit (7)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (15)
  • Show More...

• Connector Type

  

  • Color-Coded (1)
  • Combination (5)
  • Compression (6)
  • Duplex (1)
  • E-Z Lock® (1)
  • FMC (31)
  • Jacketed MC/TECK (2)
  • Liquidtight (11)
  • LiquidTight, Insulated (3)
  • Nonmetallic (1)
  • Nonmetallic, Screw-on (1)
  • Screw In (2)
  • Screw-In (8)
  • Screw-In, Insulated (6)
  • SET SCREW (3)
  • Single Screw Strap-Type, Insulated (1)
  • Single Screw, Strap Type (2)
  • Squeeze (24)
  • Squeeze, Insulated (9)
  • STRAIGHT (11)
  • STRAIGHT MALE (3)
  • Straight Nonmetallic (4)
  • Straight, Insulated (3)
  • Two Screw Strap Type (1)
  • Two Screw, Strap Type (5)
  • Two-Screw, Strap Type (12)
  • U Shaped (1)
  • U Shaped, Insulated (1)
  • Show More...

• Knockout Size

  

  • 0.370 in (2)
  • 0.755 in (1)
  • 1 in (8)
  • 1/2 in (18)
  • 1-1/2 in (4)
  • 1-1/4 in (6)
  • 19/32 in (1)
  • 2 in (4)
  • 3/4 in (10)
  • 3/8 in (2)
  • Show More...

• Minimum Qty

  

  • 100 (5)
  • 50 (5)
  • Show More...

• Application

  

  • 100 Amp or Less Service, For Rigid/IMC Conduit, Clamp Type Entrance Cap Cat. #1256, Roof Flashing RF-200, Porcelain Wire Holder MWH-1, 2" Pipe Strap 1906 (Two) (1)
  • 14/2 To 12/2 AWG Underground Feeder Cable (1)
  • 45 Degree fitting for connecting flexible metal conduit or armored cable to box or enclosure. Zinc Die Cast (1)
  • 45 Degree fittings for connecting steel or aluminum flexible metal conduit to box or enclosure. Zinc Die Cast (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. Insulator rated 105 degree C. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 3/8" thru 3/4" zinc die cast. Insulator rated 105 degree C. (2)
  • 90 Degree Connector used to connect Flexible Metal Conduit to box enclosure. (2)
  • 90 Degree Male- Form 2 (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. Diameter for 1.500" 0 min to 1.625" 0 max. (1)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. 12/2 (.560" 0 min) to 10/3 (.610" 0 max) (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. 1.187" 0 min to 1.312" 0 max (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.75" 0 min) (.875" 0 max) (1)
  • 90 Degrees connector suitable for used to connect flexible metal conduit to box or enclosure. (1)
  • 90 Degrees connector suitable to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.875" 0 min) to (1.00" 0 max) (1)
  • 90 Degrees fitting with cover for connecting flexible metal conduit to box or enclosure. (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Recommended Cable Types Used to Connect Flexible Metal Conduit to Box or Enclosure. Diameter For (.75" 0 Min) to (.875" 0 Max) (1)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • 90°Connector Suitable For Used to Connect Mc/Fmc to Box or Enclosure. Diameter: 1.50" 0 Min to 1.625" 0 Max (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Diameter (.875" 0 Min) to (1.00" 0 Max) (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Recommended Cable Types: 1.187" 0 Min to 1.312" 0 Max (1)
  • 90°Fitting with Cover For Connecting Flexible Metal Conduit to Box or Enclosure (1)
  • 90°Fitting with Cover Recommended Cable Types Used For Connecting Flexible Metal Conduit to Box or Enclosure. 14/4 (.45" 0 Min) to 10/4 (.625" 0 Max). Mc/Mci-A (1)
  • 90°Fitting With Cover Used For Connecting Flexible Metal Conduit to Box or Enclosure (2)
  • 90degree Connector for use with 3/8" Flexible Metal Conduit. Non-Insulated. Recommended cable types: Diameter for 12/2 (.550" 0 min) to 10/3 (.610" 0 max) (1)
  • AC - MCI-A - HCF Steel and Aluminum Cable (1)
  • AC/MC (10)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (22)
  • Aluminum And Steel Flex AC MC Cable (7)
  • Aluminum And Steel Flex AC MC Cable, MCI-A (MCAP (1)
  • Approved for indoor and outdoor applications (1)
  • Armored Cable and Flexible Metal Conduit (1)
  • Armored Cable;Metal Clad Cable;MCI-A Cable;Flexible Metallic Conduit to a Box or Enclosure;Dry Appliations (3)
  • BCH-HBA for Multi-tier Assemblies (1)
  • Bridgeport Fittings EZ-Lock 3/4 inch steel connector recommended for cables with an O.D. of .56 - .81 or 10/3 to 6/3 Listed for use with steel and aluminum Flexible Metallic Conduit (FMC) in 1/2 inch trade size. Listed for use with Metal Clad (MC) and A (1)
  • Clamp on Type For Use With Threaded or Unthreaded EMT or IMC Conduit (2)
  • Clamp type entrance cap for rigid conduit and IMC. 1 hole 1" dia.; 3 holes 7/8" dia.; 3 holes 1 5/16" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 1 hole 7/16" dia.; 2 holes 5/8" dia.; 3 holes 3/4" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 hole 9/16" dia.; 2 holes 3/4" dia.; 3 holes 1" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 holes 3/8" dia.; 3 holes 7/16" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 holes 7/16" dia.; 3 holes 1/2" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 holes 7/16" dia.; 3 holes 5/8" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 3 holes 1 3/4" dia.; 4 holes 1 1/8" dia. (3)
  • Clamp type entrance cap for rigid conduit and IMC. 4 holes 5/16" dia. (1)
  • Clamp-on adjustable wire holder for 1 1/4 " through 3" service entrance mast, approx 1" by 15/16" wire opening. (1)
  • Commercial (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (117)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility - Other (6)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (2)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (1)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (30)
  • Commercial;Industrial;Wet Location (12)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. Thi (1)
  • Conduit hubs provide a liquid tight, oil tight and dust tight termination of electrical conduit through the walls of sheet metal enclosures. The hubs fit into standard knock-out dimensions. (2)
  • Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. (2)
  • Converts Metallic Box Rough Edged Knockout Holes to Smooth Insulated Holes for Protection of Electrical and Telecommunications Cable (1)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (5)
  • Datacom and Low Voltage;Electrical (1)
  • Datacom and Low Voltage;Electrical Fixing and Fastening (1)
  • Dry or Wet Locations (1)
  • Dust Tight, Hazardous Location, Indoor, Electrical Enclosure, Machine Tool, Potable Power Tool (1)
  • Electrical (4)
  • Electrical Fixing and Fastening (4)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (1)
  • Existing 1/2 in or 5/8 in wall with 4 in hole saw. (4)
  • E-Z LOCK® AC/MC/MCI-A and FMC Duplex connector, allows for the connection of two AC/MC cables into one 1/2" knockout. It is also suitable for use with steel and aluminum 3/8" trade size Flexible Metallic Conduit (FMC). Recommended cable types: 14/2 - 10/3 diameter: .42 - .61 (1)
  • Fittings are to be used with PolyTuff® I and PolyTuff® II (1)
  • Flat Surface Retrofit Construction (1)
  • Flex AC MC Cable (7)
  • Flexible/MCI-A Cable (1)
  • Flexible/NM Cable (1)
  • For AC - MCI-A - HCF steel and aluminum cable (24)
  • For connecting flexible metal conduit to box or enclosure. Screw connector into conduit and snap into electrical box. Patented E-Z LOCK design. (1)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For connecting nonmetallic cable to box or enclosure. It can be used with one or two cables. (1)
  • For connecting nonmetallic cable to box or enclosure. It can be used for one or two cables. (1)
  • For connecting portable cord to box or enclosure. Locknut not required. (1)
  • For Connecting To Type A Flexible Nonmetallic Conduit (10)
  • For Connections and Strain Relief in Cramped Spaces (1)
  • For Flex, AC and MC Cables (1)
  • For Flexible Type Neoprene, Hypalon And PVC Jacketed Power Or Control Cord And Cable (10)
  • For Gripping Portable Cord Relieving Strain On Cord And Prevent Wires From Being Pulled Out Of Connecting Screws (1)
  • For Hazardous Locations (1)
  • For Liquidtight Flexible Metal Conduit (24)
  • For Securing And Sealing Cords And Cables Entering Enclosures Or Raceways (9)
  • For Service Entrance Cable (3)
  • For Terminating Liquidtight Flexible Metal Conduit to a Enclosure (1)
  • For Terminating Liquidtight Flexible Metal Conduit to a Enclosure at a 90 Degree Angle (1)
  • For Use in Old Work Applications, cable can be pulled into a box, then this connector is installed onto the cable, and locked into place from inside the box. No tools required. cULus Listed for use with 14/2 to 10/3 (.40"-.63") aluminum and Steel AC/MC/MCI-A/HCF. (1)
  • For use on wood or steel stud to position and support datacom, video, and/or voice cabling; also suitable for use with nonmetallic sheath cables. May be used on metallic or nonmetallic cabinets and enclosures. Provides neat and positive securement of cables in any position. (1)
  • For use with Carflex conduit and Carflex X-Flex conduit (6)
  • For use with Liquidtight Metal conduit and PolyTuff I Non-Metallic conduit (3)
  • For use with non-metallic sheathed cable (1)
  • For use with non-metallic sheathed cable and flexible cord (1)
  • For Used To Ground And Secure Nonmetallic Sheathed And Service Entrance Cable to Boxes And Enclosures (2)
  • General Purpose;Wet Location (6)
  • Hazardous Location (7)
  • Hazardous Location;Use to secure and seal cords or cables entering enclosures or race-ways (1)
  • Hazardous Location;Wet Location (28)
  • Hazardous Locations;Ordinary Location;Wet/Dry Locations (2)
  • High-quality, corrosion-resistant, liquidtight termination for LTA flexible aluminum conduit (8)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors & Controls;Printing Equipment;Pumps;Refrigeration Equipment;Assemblies;Wire Hook-Up;Indoor/Outdoor (12)
  • HVAC Equipment;Machine Tools;Marine Equipment;Motors and Controls;Printing Equipment;Pumps;Refrigeration Equipment;Transformer Connections;Outdoor Lighting (3)
  • Ind Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (6)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (54)
  • Indoor and Outdoor;All Fittings Can Be Used in Chemical and Treatment Plants As Well As for Offshore;Typical Applications Include Wiring of Motors;Transformers;Advanced Machinery;Refrigeration and Tools (6)
  • Indoor Use in Wiring of Enclosures;Power Boxes;Machine Tools and Power Centers (3)
  • Indoor/Outdoor (2)
  • Indoor/Outdoor, Communication Systems (1)
  • Indoor;Outdoor (3)
  • Industrial (33)
  • Industrial;Commercial;Used where liquid-tight flexible metallic raceway is installed in outdoor or indoor locations, and exposed to continuous or intermittent moisture;Used to positively bond flexible liquid-tight flexible metallic conduit to boxes or enclosures;Typical applications include raceway for general purpose industrial and commercial construction, Machine OEMs, panel builders, indoor and outdoor installations;Liquid-tight applications against water, oils, cutting fluids, mild acids;For use in ele (1)
  • Industrial;Indoor;Outdoor (2)
  • Inside/outside box mountable. Connector suitable for use with (1) 8/2, 8/3, 6/2 or 6/3 NM-B cable (1)
  • Inside/outside box mountable. Connector suitable for use with (1) 14/2 to 6/2 NM-B cable or (2) 14/2 to 12/3 NM-B cables in any combination. (1)
  • Install by snapping cable into place, then snapping connector into the box. No tools required. cULus Listed for use with 14/2 to 10/3 (.40"-.63") Aluminum and Steel AC/MC/MCI-A/HCF and 3/8" Aluminum and Steel FMC/RWFMC. (1)
  • Light Duty (4)
  • Machine Tools, Motor Hookups, Food Processing Equipment, Extensions from Wire Ways, and Sensor and Micro Switch Wiring Found In Control Consoles (4)
  • Metallic And Non Metallic Liquid Tight Conduit Typ (1)
  • Motor Circuits, Agricultural Buildings, industrial, Commercial, Direct Burial, Encased in Concrete, Swimming Pool, Spa, Hot Tub Motor, Electric Signs, Outline Lighting Supply, Secondary Circuit Conductor, Hazardous Location, Floating Building Feeders (2)
  • New work and Retrofit (4)
  • NM Cable (12)
  • NM Sheathed Cable (1)
  • NM/Flex/AC Cable, MC Steel and Aluminum Jacketed (1)
  • NM/SEU Cable (2)
  • Nonmetallic screw-on 90 degree connectors for use with nonmetallic "Type B" liquid tight conduit. PVC construction with zinc locknut. Connectors simply screw onto cable. No tools required! (1)
  • Nonmetallic screw-on 90 degree connectors for use with nonmetallic "Type B" liquid tight conduit. PVC construction with zinc locknut. Connectors simply screw onto cable. No tools required! Insert UL bug. File No.E9391 (1)
  • Offset Eye (1)
  • Outdoor (17)
  • Outdoor Life;New Brick Construction (1)
  • Polyethylene "Redheads" prevent damage to wire installation when placed between the wire and armored sheath. Rated 90 degree C. (3)
  • Polyethylene Redheads Prevent Damage to Wire Installation when Placed Between the Wire and Armored Sheath. Rated 90 Degree C (1)
  • Prevents severe conduit bends and pullout (5)
  • Protection of Fiber Optic Cable, Installation of Instrumentation and Control Cable, Indoor and Outdoor Lighting, Packaging Equipment, Marine and Shipboard Wiring, and Flexing-Component Wiring Protection on Robots, Graphic Arts Equipments, Etc (5)
  • Protects cable running through wood stud, from nails and screws. Great for protecting conductors, cables and raceways. (1)
  • Provide a Liquidtight and Strain Relief Termination for Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable;For use in Wet or Dry Locations Sealing Electrical Connections Against Dust and Dirt;Oil;Water or Other Atmosphere Containing Moisture (8)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provide a Means for Passing a Cord Cable Into an Enclosure;Form a Watertight seal for Cord;Provide Pull-Out Protection for Cord;Ensuring a secure Connection (13)
  • Provides a Positive Seal Against Water, Oil And Dust (4)
  • Provides positive seal between shoulder of connector and sheet metal enclosure. Used with 0.50 inch connector. (1)
  • Provides positive seal between shoulder of connector and sheet metal enclosure. Used with 0.75 inch connector. (1)
  • PVC Jacketed MC cable (1)
  • Recommended cable types for connecting 10/4 to 8/3 PVC MC cable to box or enclosure diameter .61 - .69. RainTight/ConcreteTight (1)
  • Recommended cable types for connecting 14/4 (.43" 0 min) to 10/3 (.61" 0 max) AC/MC Cable or 3/8" Flexible Metal Conduit to box or enclosure. HCF/HCFMCI-A (1)
  • Recommended cable types for use with Steel or Aluminum 14/2 (.38" 0 min) to 10/3 AWG (.61" 0 max) Health Care Facility (HCF) Armored Cable. AC/MC/MCI-A (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.1" to 1.25" (4/4 to 3/4) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.25" to 1.5" (2/4 to 3-2/0) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.25" to 1.50" (2/4 to 3-2/0) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.750" to 2.000" (4-4/0 to 4-250MCM) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable. 4-300 MCM to 4-500 MCM, diameter 2 - 2.5 (1)
  • Recommended Cable Types to Connect Armored or Metal Clad Cable to Box or Enclosure. (.44 to .61) 12/2 - 10/4 AC/MC/MCIA/FMC/HCF/HCFMCI-A (1)
  • Recommended Cable Types to Connect Corrugated or Interlocked Mc or Ac Cable to Box or Enclosure. 14/4(.44" 0 Min) to 10/4 (.61" 0 Max) Mci-A. 12/2 to 10/4 Ac/Mc/Mcia/Hcf/Hcfmci-A 3/8" Fmc. 14/2 - 10/3 Nm Cable (1)
  • Recommended Cable Types to Connect Mc & Ac Cable or 3/8 Inch Flexible Metal Conduit to Box or Enclosure. 14/2 (.38" 0 Min) to 10/3 (.61" 0 Max) Mci-A/Hcf/Hcfmcia (1)
  • Recommended cable types to connect steel armored cable to box or enclosure. 14/2-10/3 Steel Armored and .43 -.61 Steel Interlocked MC (1)
  • Recommended cable types to connect steel flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. Armored Cable .86" - .92 DIA. (1)
  • Recommended Cable Types to Connect Steel Flexible Metal Conduit or Armored Cable to Box or Enclosure. Armored Cable .86"-.92" Dia (1)
  • Recommended Cable Types to Connect Steel or Aluminum Flexible Metal Conduit or Armored Cable to Box or Enclosure. (.56-.61 Dia.) For 12/3 to 10/3 Steel or Aluminum Mc Cable (1)
  • Recommended cable types with 12/2 to 10/3 PVC Jacket MC Cable or TECK Cable .50 - .61. RainTight and ConcreteTight (1)
  • Residential;Commercial (1)
  • Screw-In Connector for flexible metal conduit (2)
  • Service Entrance (1)
  • Simply snap cables into connector and snap assembly into electrical box. (3)
  • Single Eye (3)
  • Snap-On Type Strap Used to Support Round Steel or Aluminum Metal Clad Cable (1)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (4)
  • Straight Male Connector (1)
  • Straight Male- Form 1 (3)
  • Straight Male- Form 2 (5)
  • Straight Male- Form 3 (4)
  • Straight Male- Form 4 (6)
  • Straight Male- Form 5 (3)
  • Straight Male- Form 7 (1)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • T&B Bullet meets performance requirements when terminating Type B liquidtight non-metallic conduit or flexible non-metallic tubing to a box or enclosure with knockout opening or threaded hub (15)
  • Terminates flexible metal conduit to a knockout in a dry location box or enclosure (2)
  • The 630-NM2 allows for multiple nonmetallic cables to be installed into a single 3/4" KO. Simply squeeze the tabsto install or remove the cables. Each port can hold One 10/3 through 14/2 cable; or One Oval 10/2, 12/2 or 14/2; or Two Oval 14/3 or 12/3; or Two Oval 10/2 thru 14/2 NM Cables. Patented. (1)
  • The holding of wires (1)
  • The NMCB-3 is provided with nails for use on wood studs or 3/4" thick furring strips to position non-metallic sheath cable. Capable of positioning up to five 14/2 to 10/3 AC or MC cables or two 14/2 NM cables in each of three rectangular slots. May also be used to be attached to metal studs or enclosures, or concrete block with #6 round head screws. Mounts in either horizontal or vertical direction. Low voltage design and unique dimpled slots prevent accidental removal of cables. (1)
  • These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. This marking helps the AHJ to precisely confirm the products intended use. Patented (1)
  • These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. This marking helps the AHJ to precisely confirm the products intended use. Patented (1)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (16)
  • To Connect Flexible Cord to a Box or Enclosure and Provide Adequate Strain Relief (3)
  • To positively bond conduit to box or enclosure (39)
  • To provide a liquidtight, dust tight connection between flexible, non-metallic conduit and a box or an enclosure (2)
  • To provide a liquidtight; dust tight connection between flexible, non-metallic conduit and a box or an enclosure. (1)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (5)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electric Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing require (10)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electrical Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing requi (2)
  • Use with Liquid Tight or Raintight Connectors, or Threaded Conduit (when used with locknuts) (8)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (16)
  • Used to connect 14/2-10/3 (.43" - .61") AC/MC/MCI-A/HCF cable and 3/8" FMC to box or enclosure. Just squeeze to insert into the 1/2" K.O. Use with an anti-short bushing. .375"Throat Opening. Great for lighting whips! Patent Pending (1)
  • Used to connect 2 14/2 - 10/2 (.43" - .59") AC/MC/MCI-A/HCF cables and 3/8" FMC to box or enclosure. No Tools Required Just squeeze to insert into the 1/2" K.O Use with an anti-short bushing. .375" Throat Opening. Great for lighting whips! (1)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. (2)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (10)
  • Used to connect flexible metal conduit to box or enclosure. (14)
  • Used to connect flexible metal conduit to box or enclosure. Insulator rated 105 degree C. (1)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to connect steel flexible metal conduit or XRW FMC to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Steel Flexible Metal Conduit to Box or Enclosure (1)
  • Used to connect steel flexible metal conduit to box or enclosure. Insulator rated 105 degree C. (1)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT. Raintight. Concrete-Tight. (2)
  • Used to Join Emt to Flexible Metal Conduit. Screw-In Type For Flex. Compression Type For EMT (3)
  • Used to join two lengths of flexible metal conduit. (3)
  • Used to support oval types SE and SEU cable to mounting surface. (1)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (52)
  • Wet Location (18)
  • Wet Location;Hazardous (18)
  • Wire Management (3)
  • Wiring Enclosure;Pendant Station;Hand Tool;Construction;Processing and Material Handling Equipment;Pump;Motor and Machine Tool;Hazardous/Wet Location (3)
  • Show More...

• Cable Entry

  

  • Black (6)
  • Lock-In tabs for NM cable (1)
  • One-Piece (6)
  • Phenolic entrance to Aluminum clamp type for Rigid/IMC (10)
  • Push-In tabs for NM cable (2)
  • Silver (2)
  • Two piece steel clamp with tabs to insert through knockout (4)
  • Show More...

• Capacity

  

  • 100 lb;444.8 N (1)
  • 140 lb;622.7 N (1)
  • 206 lb;916.3 N (1)
  • 22 cu.in (1)
  • 75 lb (1)
  • Various Cable Diameter Ranges (21)
  • Show More...

• Size

  

  • 0.375 (4)
  • 0.430 to 0.560 in (Cable) (1)
  • 0.75 (3)
  • 1 (36)
  • 1 1/2 (3)
  • 1 1/4 (3)
  • 1 1/4" NPT (3)
  • 1 in (19)
  • 1 INCH (25)
  • 1" NPT (4)
  • 1" NPT, Size 1 (2)
  • 1" NPT, Size 2 (1)
  • 1.13 in x 0.55 in x 1.1 in (3)
  • 1.29 in x 0.55 in x 1.1 in (3)
  • 1.347 in x 0.57 in x 0.545 in (1)
  • 1.4 in x 0.55 in x 1.5 in (1)
  • 1.5 (1)
  • 1.56 in x 0.5 in x 2.3 in (2)
  • 1.81 in x 0.71 in x 1.6 in (3)
  • 1.88 in x 1.88 in x 2.45 in (2)
  • 1/2 (43)
  • 1/2 in (48)
  • 1/2 in;12.7 mm (1)
  • 1/2 INCH (32)
  • 1/2" NPT (8)
  • 1/2" NPT, Size 1 (2)
  • 1/2" NPT, Size 2 (1)
  • 1/2-14 (1)
  • 1-1/2 (19)
  • 1-1/2 in (11)
  • 1-1/2 INCH (12)
  • 1-1/4 (16)
  • 1-1/4 - 3 (1)
  • 1-1/4 in (13)
  • 1-1/4 in (Stud) (1)
  • 1-1/4 INCH (15)
  • 1-11-1/2 (1)
  • 1-14 in;31.8 mm (1)
  • 14/2 AWG;12/2 AWG (1)
  • 14/3 AWG;12/3 AWG (1)
  • 2 (23)
  • 2 1/2 (3)
  • 2 1/2" NPT (1)
  • 2 in (10)
  • 2 IN NPT Size 2 (1)
  • 2 INCH (14)
  • 2.5 (2)
  • 2-1/2 (8)
  • 2-1/2 in (7)
  • 2-1/2 Inch (6)
  • 2-1/4 in (Screw) (1)
  • 3 (12)
  • 3 1/2 (3)
  • 3 in (6)
  • 3 INCH (8)
  • 3.25 in x 1.719 in x 2.9 in (1)
  • 3/4 (44)
  • 3/4 in (37)
  • 3/4 in NPT (1)
  • 3/4 in;19 mm (1)
  • 3/4 INCH (26)
  • 3/4" NPT (5)
  • 3/4" NPT, Size 1 (2)
  • 3/4" NPT, Size 2 (1)
  • 3/4-14 (1)
  • 3/8 (28)
  • 3/8 in (13)
  • 3/8 IN (1/2 KO) (1)
  • 3/8 IN Flex, 1/2 IN Hub (3)
  • 3/8 INCH (8)
  • 3/8 lag screw approx.1" by 15/16 (1)
  • 3/8 To 1/2 In (1)
  • 3/8" (1)
  • 3/8" NPT (1)
  • 3-1/2 (4)
  • 3-1/2 in (1)
  • 4 (9)
  • 4 in (3)
  • 4 INCH (8)
  • 5/16 in (2)
  • 7/16 in (1)
  • F1 (1)
  • F2 (11)
  • F3 (7)
  • F4 (2)
  • L(0.500) x W(2.533) x H(2.655) (1)
  • L(0.633) x W(3.296) x H(1.920) (1)
  • L(0.750) x W(1.345) x H(0.375) (1)
  • L(0.860) x W(0.876) x H(0.876) (1)
  • L(0.880) x W(0.920) x H(1.190) (1)
  • L(0.972) x W(0.942) x H(0.919) (1)
  • L(0.978) x W(0.978) x H(1.792) (1)
  • L(1.010) x W(1.010) x H(0.492) (1)
  • L(1.029) x W(1.029) x H(1.289) (1)
  • L(1.040) x W(1.040) x H(1.827) (2)
  • L(1.060) x W(1.125) x H(1.125) (1)
  • L(1.070) x W(1.200) x H(1.630) (1)
  • L(1.090) x W(1.077) x H(1.077) (1)
  • L(1.094) x W(1.094) x H(0.965) (1)
  • L(1.125) x W(1.125) x H(1.340) (1)
  • L(1.145) x W(1.077) x H(1.077) (1)
  • L(1.200) x W(0.400) x H(0.600) (1)
  • L(1.200) x W(0.900) x H(1.187) (1)
  • L(1.280) x W(1.280) x H(2.205) (1)
  • L(1.290) x W(1.290) x H(1.004) (1)
  • L(1.302) x W(1.872) x H(1.872) (1)
  • L(1.310) x W(1.310) x H(2.221) (1)
  • L(1.390) x W(1.000) x H(1.000) (2)
  • L(1.410) x W(0.850) x H(0.850) (3)
  • L(1.410) x W(1.410) x H(1.545) (1)
  • L(1.420) x W(1.420) x H(1.425) (1)
  • L(1.420) x W(1.420) x H(2.376) (2)
  • L(1.435) x W(1.470) x H(1.470) (1)
  • L(1.470) x W(1.055) x H(1.055) (1)
  • L(1.470) x W(2.115) x H(2.990) (1)
  • L(1.473) x W(1.179) x H(0.840) (1)
  • L(1.473) x W(1.244) x H(0.840) (1)
  • L(1.497) x W(4.398) x H(1.836) (2)
  • L(1.526) x W(0.780) x H(0.780) (1)
  • L(1.542) x W(1.105) x H(1.105) (1)
  • L(1.545) x W(1.410) x H(1.410) (1)
  • L(1.556) x W(1.556) x H(1.555) (1)
  • L(1.600) x W(1.595) x H(1.595) (1)
  • L(1.630) x W(2.632) x H(3.020) (1)
  • L(1.648) x W(1.648) x H(0.683) (1)
  • L(1.664) x W(1.664) x H(2.425) (2)
  • L(1.750) x W(1.750) x H(1.810) (1)
  • L(1.772) x W(1.605) x H(0.840) (1)
  • L(1.800) x W(1.432) x H(0.750) (1)
  • L(1.820) x W(1.820) x H(2.237) (1)
  • L(1.890) x W(1.890) x H(2.530) (2)
  • L(1.921) x W(0.569) x H(0.570) (1)
  • L(1.930) x W(1.930) x H(1.975) (1)
  • L(10.200) x W(8.700) x H(4.425) (1)
  • L(14.508) x W(10.768) x H(1.690) (1)
  • L(2.012) x W(2.012) x H(2.085) (1)
  • L(2.075) x W(1.252) x H(1.000) (1)
  • L(2.140) x W(1.835) x H(1.085) (1)
  • L(2.140) x W(1.842) x H(1.085) (1)
  • L(2.154) x W(1.605) x H(0.950) (1)
  • L(2.156) x W(1.885) x H(2.575) (1)
  • L(2.190) x W(1.135) x H(1.409) (1)
  • L(2.200) x W(2.200) x H(2.990) (1)
  • L(2.210) x W(1.514) x H(0.840) (1)
  • L(2.240) x W(2.240) x H(1.982) (1)
  • L(2.242) x W(2.460) x H(2.460) (1)
  • L(2.305) x W(2.460) x H(2.460) (1)
  • L(2.331) x W(3.389) x H(3.389) (1)
  • L(2.388) x W(2.035) x H(0.950) (1)
  • L(2.428) x W(2.428) x H(2.293) (1)
  • L(2.466) x W(2.105) x H(3.093) (1)
  • L(2.467) x W(2.115) x H(0.950) (1)
  • L(2.496) x W(1.819) x H(0.854) (1)
  • L(2.510) x W(2.560) x H(1.570) (1)
  • L(2.682) x W(3.645) x H(3.645) (2)
  • L(2.700) x W(2.700) x H(2.175) (1)
  • L(2.758) x W(3.722) x H(3.722) (1)
  • L(2.840) x W(2.550) x H(2.550) (1)
  • L(2.874) x W(4.107) x H(4.107) (2)
  • L(2.901) x W(2.750) x H(3.700) (1)
  • L(3.055) x W(2.752) x H(1.135) (1)
  • L(3.080) x W(3.160) x H(1.940) (1)
  • L(3.218) x W(3.235) x H(4.250) (1)
  • L(3.281) x W(3.890) x H(5.000) (1)
  • L(3.360) x W(3.360) x H(2.400) (1)
  • L(3.461) x W(4.575) x H(1.653) (2)
  • L(3.500) x W(4.060) x H(4.060) (1)
  • L(3.504) x W(3.504) x H(0.563) (1)
  • L(3.680) x W(3.150) x H(3.150) (1)
  • L(3.753) x W(3.753) x H(2.850) (1)
  • L(4.111) x W(1.450) x H(0.534) (2)
  • L(4.373) x W(4.373) x H(3.870) (1)
  • L(4.470) x W(4.510) x H(4.510) (1)
  • L(4.490) x W(2.734) x H(0.417) (1)
  • L(4.620) x W(2.853) x H(1.498) (1)
  • L(4.625) x W(4.562) x H(1.744) (1)
  • L(4.650) x W(3.420) x H(3.420) (1)
  • L(4.850) x W(5.290) x H(5.290) (1)
  • L(4.875) x W(2.300) x H(2.300) (1)
  • L(4.894) x W(4.894) x H(4.204) (1)
  • L(4.934) x W(7.186) x H(5.159) (3)
  • L(5.421) x W(5.421) x H(4.565) (1)
  • L(5.650) x W(3.420) x H(0.370) (1)
  • L(6.050) x W(4.875) x H(2.400) (2)
  • L(6.313) x W(3.078) x H(2.954) (1)
  • L(7.012) x W(9.058) x H(5.160) (3)
  • L(7.186) x W(4.934) x H(5.160) (2)
  • L(7.187) x W(6.125) x H(2.975) (1)
  • L(7.188) x W(4.937) x H(0.562) (1)
  • L(7.625) x W(5.599) x H(1.875) (1)
  • L(7.875) x W(6.700) x H(3.450) (1)
  • L(8.500) x W(1.625) x H(3.125) (1)
  • L(8.500) x W(3.125) x H(4.625) (1)
  • L(8.500) x W(5.125) x H(6.625) (1)
  • L(9.400) x W(7.500) x H(3.950) (1)
  • Standard Sized (11)
  • Show More...

• Color Code

  

  • BLACK (1)
  • BLUE (6)
  • BROWN (6)
  • GRAY (2)
  • ORANGE (3)
  • Orchid (4)
  • PINK (2)
  • RED (3)
  • WHITE (3)
  • YELLOW (4)
  • Show More...

• Standard Package

  

  • 10 (4)
  • 15 (5)
  • 20 (6)
  • 3 in (1)
  • 30 (3)
  • 4 (4)
  • 40 (2)
  • 5 in (2)
  • 50 PER CASE (2)
  • 6 (1)
  • 8 W (2)
  • Show More...

• Depth

  

  • 0.562 (1)
  • 2.954 (1)
  • 5.159 (3)
  • 5.16 (5)
  • Show More...

• Diameter

  

  • 0.395 to 0.638 in (Cable) (1)
  • 0.4 in (1)
  • 0.460 to 0.610 in (Cable) (1)
  • 0.469 to 0.610 in (Cable) (1)
  • 0.55 in (1)
  • 0.618 in (1)
  • 0.622 to 0.642 in (ID);0.82 to 0.84 in (OD) (1)
  • 0.78 in (1)
  • 0.813 in (4)
  • 0.82 to 0.84 in (ID);1.03 to 1.05 in (OD) (1)
  • 0.820 to 0.840 in (Outer);0.622 to 0.642 in (Inner) (3)
  • 0.90 in (1)
  • 0.91 in (1)
  • 0.94 in;23.9 mm (2)
  • 0.97 in (1)
  • 0.975 in (9)
  • 1 in (3)
  • 1 in (1 Hole);7/8 in (2 Hole);1-5/16 in (3 Hole) (1)
  • 1 in;25.4 mm (1)
  • 1.01 in (1)
  • 1.029 in (1)
  • 1.077 in (2)
  • 1.125 in (1)
  • 1.19 in (2)
  • 1.220 in (8)
  • 1.23 in (10)
  • 1.244 in (1)
  • 1.25 in (6)
  • 1.25 in;31.8 mm (5)
  • 1.250 in (2)
  • 1.27 in (1)
  • 1.277 in (1)
  • 1.290 in (1)
  • 1.38 in;35.1 mm (1)
  • 1.4 in (1)
  • 1.40 in;35.6 mm (2)
  • 1.420 in (1)
  • 1.421 in (1)
  • 1.43 in (2)
  • 1.46 in (2)
  • 1.48 in (2)
  • 1.5 in (2)
  • 1.5 in;37.5 mm (1)
  • 1.5 in;38.1 mm (1)
  • 1.50 in;38.1 mm (1)
  • 1.514 in (1)
  • 1.55 in (1)
  • 1.563 in (5)
  • 1.57 in (1)
  • 1.583 in (1)
  • 1.605 in (2)
  • 1.63 in;41.4 mm (1)
  • 1.648 in (1)
  • 1.656 in (4)
  • 1.664 in (1)
  • 1.7 in (1)
  • 1.71 in;43.4 mm (1)
  • 1.74 in (1)
  • 1.75 in (2)
  • 1.75 in;44.5 mm (2)
  • 1.76 in (2)
  • 1.78 in (2)
  • 1.81 in;45.9 mm (2)
  • 1.820 in (1)
  • 1.890 in (1)
  • 1.925 in (1)
  • 11/16 in;27 mm (1)
  • 1-1/2 in (4)
  • 1-1/8 in (6)
  • 1-11/16 in (3)
  • 1-11/16 in;42.9 mm (2)
  • 1-13/32 in (2)
  • 1-21/32 in;42.1 mm (4)
  • 13/16 in (1)
  • 1-3/16 in (1)
  • 1-3/4 in (2)
  • 1-3/4 in (3 Hole);1-1/8 in (4 Hole) (2)
  • 1-3/8 in (5)
  • 1-3/8 in;34.9 mm (5)
  • 15/16 in (3)
  • 15/16 in;23.8 mm (1)
  • 15/16 in;33.3 mm (1)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/8 in (1)
  • 1-7/16 in (3)
  • 1-7/32 in (2)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (5)
  • 2 in (2)
  • 2.10 in (1)
  • 2.115 in (1)
  • 2.25 in (7)
  • 2.250 in (1)
  • 2.31 in;58.7 mm (2)
  • 2.38 in (1)
  • 2.4 in (1)
  • 2.418 in (1)
  • 2.438 in (3)
  • 2.440 in;61.98 mm (1)
  • 2.460 in (1)
  • 2.533 in (1)
  • 2.550 in (1)
  • 2.63 in;66.8 mm (1)
  • 2.67 in (1)
  • 2.7 in (1)
  • 2-1/16 in (1)
  • 2-1/2 in (1)
  • 2-1/4 in (2)
  • 2-1/8 in (1)
  • 2-11/16 in (2)
  • 2-23/32 in;69.1 mm (3)
  • 2-3/16 in (1)
  • 23/16 in;55.6 mm (1)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-5/16 in (1)
  • 2-5/8 in (1)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (7)
  • 3..813 in (1)
  • 3.150 in (1)
  • 3.19 in;81 mm (2)
  • 3.28 in (1)
  • 3.36 in (1)
  • 3.383 in (2)
  • 3.389 in (1)
  • 3.420 in (1)
  • 3.645 in (1)
  • 3/8 in (2 Hole);7/16 in (3 Hole) (1)
  • 31/4 in;82.6 mm (1)
  • 3-1/4 in;82.6 mm (5)
  • 3-1/8 in (1)
  • 31/8 in;79.4 mm (1)
  • 3-1/8 in;79.4 mm (1)
  • 3-13/64 in (1)
  • 3-15/16 in (1)
  • 3-3/8 in (2)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/16 in (1)
  • 3-7/8 in (1)
  • 4 in (1)
  • 4.107 in (1)
  • 4.188 in (3)
  • 4.38 in;111.3 mm (1)
  • 4.575 in (1)
  • 4-1/2 in;114.3 mm (1)
  • 4-1/8 in (1)
  • 4-7/16 in (1)
  • 4-7/8 in (1)
  • 5.599 in (1)
  • 5.750 in (1)
  • 5/16 in (1)
  • 5-1/2 in;139.7 mm (1)
  • 7/16 in (1 Hole);5/8 in (2 Hole);3/4 in (3 Hole) (1)
  • 7/16 in (2 Hole);1/2 in (3 Hole) (1)
  • 7/16 in (2 Hole);5/8 in (3 Hole) (1)
  • 9/16 in (1)
  • 9/16 in (1 Hole);3/4 in (2 Hole);1 in (3 Hole) (1)
  • Show More...

• Shape

  

  • Plastic (2)
  • Rectangular (2)
  • UV-Rated Plastic (1)
  • Show More...

• Length

  

  • 0.500 in (1)
  • 0.81 in;20.6 mm (4)
  • 0.865 in (1)
  • 0.872 in (2)
  • 0.88 in;22.4 mm (2)
  • 0.94 in;23.9 mm (2)
  • 0.978 (1)
  • 1 in (7)
  • 1 in;25.4 mm (1)
  • 1.010 in (1)
  • 1.032 in (1)
  • 1.050 in (1)
  • 1.13 in (1)
  • 1.2 in (1)
  • 1.20 in;30.5 mm (1)
  • 1.203 in (1)
  • 1.25 in (1)
  • 1.250 in (4)
  • 1.289 in (1)
  • 1.31 (1)
  • 1.31 in (3)
  • 1.313 in (1)
  • 1.34 in (2)
  • 1.347 (1)
  • 1.38 in (1)
  • 1.41 (1)
  • 1.41 in (3)
  • 1.42 (1)
  • 1.425 in (1)
  • 1.43 in (2)
  • 1.437 (1)
  • 1.438 in (2)
  • 1.44 in;36.6 mm (1)
  • 1.445 in (1)
  • 1.473 in (1)
  • 1.475 in (1)
  • 1.48 in (2)
  • 1.5 in;38.1 mm (1)
  • 1.500 in (1)
  • 1.56 in (2)
  • 1.625 (1)
  • 1.625 in (2)
  • 1.63 in (2)
  • 1.63 in;41.4 mm (1)
  • 1.648 in (1)
  • 1.664 (1)
  • 1.68 in (1)
  • 1.687 (1)
  • 1.75 (1)
  • 1.750 in (1)
  • 1.772 in (2)
  • 1.8 (5)
  • 1.82 in (1)
  • 1.85 in (1)
  • 1.89 (1)
  • 1.89 in (1)
  • 1.921 (1)
  • 1.95 in (1)
  • 1/2 in (2)
  • 10.768 in (1)
  • 100 ft (2)
  • 11/16 in (1)
  • 1-1/16 in (4)
  • 1-1/16 in;27 mm (1)
  • 1-1/4 in (2)
  • 1-1/8 in (7)
  • 1-11/16 (1)
  • 1-15/16 (1)
  • 1200.7874 (3)
  • 1-21/32 in;42.1 mm (3)
  • 1-23/32 (1)
  • 1-25/32 in (3)
  • 1-3/16 (1)
  • 13/16 in (1)
  • 1-3/4 (1)
  • 1-3/4 in (5)
  • 1-3/8 (1)
  • 1-3/8 in (2)
  • 1-3/8 in (Strap Center point Length) (2)
  • 13/8 in;34.9 mm (1)
  • 1-3/8 in;34.9 mm (2)
  • 15 in (1)
  • 15/16 in (1)
  • 1-5/16 in (16)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/32 in;29.4 mm (1)
  • 1-5/8 in (3)
  • 17 in (1)
  • 1-7/16 (1)
  • 1-7/16 in (1)
  • 1-7/8 in (3)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (3)
  • 1-9/16 in (3)
  • 2 in (9)
  • 2 in;50.8 mm (1)
  • 2.063 in (5)
  • 2.155 in (1)
  • 2.188 in (1)
  • 2.2 (1)
  • 2.2 in (1)
  • 2.210 in (1)
  • 2.217 in (1)
  • 2.235 in;59.31 mm (1)
  • 2.25 in;57.2 mm (1)
  • 2.28 in (1)
  • 2.3 in (1)
  • 2.3 in (Body) (1)
  • 2.305 (1)
  • 2.325 in (1)
  • 2.331 in (1)
  • 2.375 in (3)
  • 2.375 in (Gland) (1)
  • 2.376 in (4)
  • 2.4 in (1)
  • 2.425 in (1)
  • 2.44 in (1)
  • 2.467 in (1)
  • 2.50 in;63.5 mm (1)
  • 2.500 in (1)
  • 2.53 in (1)
  • 2.55 in (1)
  • 2.59 in;65.8 mm (1)
  • 2.6 in (1)
  • 2.625 in (Gland) (3)
  • 2.682 (1)
  • 2.682 in (1)
  • 2.7 in (1)
  • 2.745 (1)
  • 2.75 (1)
  • 2.750 in (1)
  • 2.750 in (Gland) (2)
  • 2.758 (1)
  • 2.874 (1)
  • 2.874 in (1)
  • 2.875 in (Gland) (1)
  • 2.99 in (1)
  • 20 in (1)
  • 2-1/16 (1)
  • 2-1/2 in (3)
  • 2-1/4 in (3)
  • 2-1/8 in (3)
  • 2-23/32 in;69.1 mm (4)
  • 2-3/16 (1)
  • 2-3/16 in (2)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-3/32 in;53.2 mm (2)
  • 2-3/4 in (1)
  • 2-3/8 (1)
  • 2-5/8 in (2)
  • 2-7/16 (1)
  • 2-7/16 in (1)
  • 2-7/8 (1)
  • 2-9/16 (1)
  • 2-9/16 in (1)
  • 3 (1)
  • 3 in (3)
  • 3.001 in (2)
  • 3.120 in (1)
  • 3.125 in (Gland) (2)
  • 3.126 in (2)
  • 3.15 in (1)
  • 3.236 (1)
  • 3.376 in (1)
  • 3.438 in (3)
  • 3.461 (1)
  • 3.461 in (1)
  • 3.5 (1)
  • 3.504 (1)
  • 3.600 in (1)
  • 3.69 in;93.7 mm (1)
  • 3.75 (1)
  • 3/4 in (2)
  • 3/8 in (1)
  • 3-1/4 in;82.6 mm (5)
  • 3-3/4 in;95.3 mm (3)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/16 in (1)
  • 3-5/8 (1)
  • 4 (1)
  • 4.125 in (1)
  • 4.44 in (1)
  • 4.47 (1)
  • 4.5 in (Gland) (1)
  • 4.85 (1)
  • 4.934 (2)
  • 4-1/2 in;114.3 mm (3)
  • 4-1/4 in (1)
  • 4-1/8 in (1)
  • 4-3/4 in (2)
  • 4-7/16 in (1)
  • 5.200 in (2)
  • 5.615 in (1)
  • 5.800 in (1)
  • 5/8 in (3)
  • 5-1/2 in (1)
  • 5-1/2 in;139.7 mm (2)
  • 5-5/16 (1)
  • 5-5/8 in (1)
  • 598.4252 (1)
  • 6 in (1)
  • 6.313 (1)
  • 6-1/2 in (2)
  • 6-3/16 in (1)
  • 7.012 (3)
  • 7.186 (1)
  • 7.186 in (1)
  • 7.188 (1)
  • 7.19 in (1)
  • 7.625 in (1)
  • 7/16 in (1)
  • 7/8 in (3)
  • 9/16 in (2)
  • Show More...

• Product Type

  

  • 1 1/2 LT Conn Ground Lug (1)
  • 1 1/2 NPT Male Al Cord/Cab FTG Neo Bush (1)
  • 1 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 1 1/4 LT 45 Degree Conn Insulated (1)
  • 1 1/4 LT 90 Degree Conn Ground Lug (2)
  • 1 1/4 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1 1/4" Screw-In Conn. (1)
  • 1 1/4" STR LT Connector Non-Insulated (1)
  • 1 In Alum L-T CRD&CBL Conn (2)
  • 1 In BLK Beauty Cord Fit .660-.780 (1)
  • 1 LT Conn Ground Lug (1)
  • 1 NPT Male Al Cord/Cab FTG Neo Bush (3)
  • 1 NPT Male Cord/Cab FTG Neo Bush (1)
  • 1" 90 Flex Connector (1)
  • 1" Flex CONN90° W/Insul Throat (1)
  • 1" Screw On Connection (1)
  • 1" Screw On Straight C (1)
  • 1" STR LT Connector Non-Insulated (1)
  • 1/2 90 Quick Lok Pro Conn (1)
  • 1/2 In STL L-T CRD&CBL Conn (3)
  • 1/2 In STR Strain RLF Conn (3)
  • 1/2 LT 45 Deg Conn Ground Lug Insulated (1)
  • 1/2 LT 45 Degree Conn Insulated (1)
  • 1/2 LT 90 Deg Conn Ground Lug Insulated (1)
  • 1/2 LT Conn Al (1)
  • 1/2 NPT 90 Deg Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT Male Al Cord/Cab FTG Neo Bush (2)
  • 1/2 NPT Male Cord/Armrd Cab FTG Neo Bush (1)
  • 1/2 NPT Male Cord/Cab FTG Neo Bush (3)
  • 1/2 Sealing Gasket (1)
  • 1/2 SS304 Cgrip .125-.188 (1)
  • 1/2" 45° Liquidtight Conn (1)
  • 1/2" Flex Connector (1)
  • 1/2" Flex Connstl (1)
  • 1/2" Plastic Uf Connec (1)
  • 1/2" Screw-In CPLG. (1)
  • 1/2" Uf Conn. (1)
  • 1/2" Undergrnd Feeder Cable Connstl (1)
  • 1/2IN 90D LT Noninsul Conn Alum (1)
  • 1-1/2 In Alum L-T CRD&CBL Conn (2)
  • 1-1/2 In STR Strain RLF Conn (2)
  • 1-1/2" 2-Screw Adaptabl (1)
  • 1-1/2" 90 Flex Conn (1)
  • 1-1/2" Angle Conn. Mall (1)
  • 1-1/2" Cncrte Pipe SLV (1)
  • 1-1/2" PVC LT 90DEG Con (1)
  • 1-1/2" Squeeze Conn. (1)
  • 1-1/2IN 90D LT Noninsul GRND Conn I (1)
  • 1-1/2IN STR LT Cordconn 1.39-1.6nyl (1)
  • 1-1/4" 2-Screw Adaptabl (1)
  • 1-1/4" 90° Liquidtight Conn (1)
  • 1-1/4" Angle Conn. Mall (1)
  • 1-1/4" Flex Conn (1)
  • 1-1/4" Flex CONN90° W/Insul Throat (1)
  • 1-1/4" Liquidtight Connstl (1)
  • 1-1/4" LT Combo CPLNG to Emt STL (1)
  • 1-1/4IN 45D LT Conn Typea Cond Irn (1)
  • 1-1/4IN STR LT Conn Typea Cond Irn (1)
  • 1IN 45D LT GRND Conn W/Lug Iron (1)
  • 1IN 90D LT Cord Conn .77-.895 Nyl (1)
  • 1IN 90D LT Noninsul GRND Conn Irn (1)
  • 1IN LT Type B Cond PVC BLK (1)
  • 1IN Wire Mesh Grip Assy (1)
  • 2 1/2 LT 90 Degree Conn (1)
  • 2 1/2 LT Conn (1)
  • 2 1/2 NPT Male Cord/Cab FTG Neo Bush (2)
  • 2 In STR Strain RLF Conn (2)
  • 2 NPT Male Cord/Cab FTG Neo Bush (1)
  • 2" 90 Deg Conn. (1)
  • 2" 90° Liquidtight Conn (1)
  • 2" STR LT Connector Non-Insulated (1)
  • 2/3 1-Hle Sec Strap (1)
  • 2-1/2" 90° Liquidtight Conn (1)
  • 2-1/2" Flex Conn (1)
  • 2-1/2" Liquidtight Connstl (1)
  • 2-1/2" LQDT. Conn. 90 Deg (1)
  • 2-1/2" Squeeze Conn. (1)
  • 2-1/2"Multi Range MC (1)
  • 2IN 90D LT Noninsul GRND Conn Irn (1)
  • 3 1/2" Angle Conn. (1)
  • 3 In Insul Ground Liq Tight 90 Deg (1)
  • 3 LT Conn (1)
  • 3 NPT Male Cord/Cab FTG Neo Bush (1)
  • 3" 45° Liquidtight Conn (1)
  • 3" 90 Flex Connector (1)
  • 3" 90° Liquidtight Conn (1)
  • 3" Angle Conn. (1)
  • 3" Liquidtight Connstl (1)
  • 3" LQDT. Conn. 90 Deg (1)
  • 3" Squeeze Conn. (1)
  • 3/4 Angle Conn. (1)
  • 3/4 Black Beauty Cord Fit .250-.400 (1)
  • 3/4 LT Conn Ground Lug (1)
  • 3/4 Non-Metallic Romex Connect 20383 (1)
  • 3/4 NPT Male Al Cord/Cab FTG Neo Bush (5)
  • 3/4 NPT Male Cord/Cab FTG Neo Bush (2)
  • 3/4" 45° Liquidtight Conn (1)
  • 3/4" 90 Deg NMLTS Screw-On Con (1)
  • 3/4" Barrel Type NM-B Cable CO (1)
  • 3/4" Flex CONN90° (1)
  • 3/4" Flex CONN90° W/Insul Throat (1)
  • 3/4" K.O to Multi Port NM Conn (1)
  • 3/4" Saddle Grip Conn (1)
  • 3/4" Screw-In CPLG. (1)
  • 3/4" STR LT Connector Non-Insulated (1)
  • 3/4" Uf Conn. (1)
  • 3/4IN STR LT Noninsul Conn Alum (1)
  • 3/4IN Wire Mesh Grip Assy (1)
  • 3/8 LQDT. Conn. (1)
  • 3/8 LQDT. Conn. 90 Deg (1)
  • 3/8 LT 90 Degree Conn (1)
  • 3/8 LT Conn (1)
  • 3/8" 1 SCW SDL Typ Con (1)
  • 3/8" Angle Conn. (1)
  • 3/8" Screw-In Conn. (1)
  • 3/8" Snap-In 90 Deg FMC Conn (1)
  • 3/8" Snap-In Ins Ac/MC Connect (1)
  • 3/8-1/2 In Duplex Box Conn (1)
  • 3/8-1/2 In Straight Box Conn (1)
  • 3-1/2" LQDT. Conn. (1)
  • 3-1/2" Serv. Entr. Cap Clamp (1)
  • 3-1/2" Squeeze Conn. (1)
  • 3-1/2" Squeeze Conn. Zinc (1)
  • 3-1/2"Flex Connstl W/Insul Throat (1)
  • 3-1/2"Liquidtight Connstl (1)
  • 4 Cab FT MC Cab Armor Od 3.50-4.02 (1)
  • 4 LT 90 Degree Conn (1)
  • 4" 90 Flex Connector (1)
  • 4" 90° Liquidtight Conn (1)
  • 4" Angle Conn. (1)
  • 4" Liquidtight Connstl (1)
  • 4" LQDT. Conn. (1)
  • 4" Squeeze Conn. (1)
  • 4" Squeeze Conn. Zinc (1)
  • 4" STR Flex Connector (1)
  • 90° Connector (17)
  • 90°Connector (17)
  • AC/MC Single Screw Strap Type Connector (5)
  • Al JKTD XP FTG Hub 1/2 In .525-.650 (1)
  • Anti-Short Bush (2)
  • Barr Gland 2 NPT SZ2 Alu Liq (1)
  • Barr Gland 3/4 NPT SZ1 Alu Liq (1)
  • Box Clip, Support, PKG BX Suppor (1)
  • Box Conn SNG Weave .3-.4 Dia (1)
  • Box Conn SNG Weave .94-1.25 Diater (1)
  • Bus Drop SNG U Eye .4-.56 Dia (1)
  • Bus Drop SNG U Eye .94-1.25 Dia (1)
  • Bus Drop Support Grip (4)
  • Bushing (2)
  • BX-Type STLSTRP 1HBXTYP 12-212-310-210-3 (1)
  • Cable Connector (7)
  • Cable Gland (5)
  • Cable Support (3)
  • CG Mle STR 1/2 .560-.625 (1)
  • CG Mle STR 1/2 0.375"-0.500" (1)
  • CG Mle STR 3/4 .560-.625 (1)
  • CG Mle STR 3/4 .670-.750 (1)
  • Clamp-On Entrance Cap (9)
  • CLR Horiz In Box Brick (1)
  • Combination Coupling (3)
  • Commercial Fittings (3)
  • Conn STR 1" .500-.625 BRN (1)
  • Conn STR 1" .625-.750 Yellow (1)
  • Connector (28)
  • Connector, Z-Cord, 1/2" NPT (1)
  • Cord Connector (19)
  • Cord Gland (28)
  • Cord Grip Alum 1/2 NPT .125 - .188 (1)
  • Cord Grip Alum 90 1/2 .375 - .438 (1)
  • Cord Grip Connector (19)
  • Cord Grip Festoon 2 1.46 X .45 (1)
  • Cord Support Grip (2)
  • Cordgrip With Mesh (1)
  • Deluxe Cord Grip (2)
  • Double Snap Cable Connector (1)
  • Duplex Connector (2)
  • Dust Tight Grip (3)
  • Ehu Strain Relief .40 - .56 (1)
  • Ehu Strain Relief .52 - .73 (1)
  • Flexible Connector (6)
  • Grounding Bridge (4)
  • Hanger, Cable, Drop Wire Support (1)
  • Horiz In Box White Retro (1)
  • Ins 3/8" Saddle GRP RN (1)
  • Insul.90 Deg Liquidtite GRD FTG 1/2 (1)
  • Insulated Connector (12)
  • Liquid Tight 45° Connector (19)
  • Liquid Tight 45°Connector (19)
  • Liquid Tight 90° Connector (28)
  • Liquid Tight 90°Connector (33)
  • Liquid Tight Conduit (3)
  • Liquid Tight Connector (5)
  • Liquid Tight Flexible 90°Connector (1)
  • Liquid Tight Flexible Connector (6)
  • Liquid Tight Ground 45° Connector (1)
  • Liquid Tight Ground 45°Connector (1)
  • Liquid Tight Ground Connector (1)
  • Liquid Tight Straight Connector (48)
  • Liquidtight Conduit Connector (7)
  • Liquidtight Connector (1)
  • Liquidtight Flexible Nonmetallic Conduit (2)
  • Low Profile Inbox (1)
  • Masonary Box Horz- Clear C (1)
  • Metallic Liquidtight Fittings (3)
  • Multi Run Cable Carrier (1)
  • Multi-Run CBL Carrier MC/Ac CBL, 560" to 690", Up to 7 Runs (1)
  • No-1 Anti-Short Bushing (1)
  • No-3 Anti-Short Bushing (1)
  • Non Metallic Liquid Tight 90° Connector (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic 90° Connector (4)
  • Non-Metallic 90°Connector (4)
  • Non-Metallic Cable Connector (5)
  • Non-Metallic Liquid Tight 90° Connector (3)
  • Non-Metallic Liquid Tight 90°Connector (6)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • Nonmetallic Liquid-Tight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Conduit Connector (6)
  • Nonmetallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Liquid-Tight Straight Conduit Connector (6)
  • Non-Metallic Straight Connector (6)
  • One Hole Strap (1)
  • Pro Connector (3)
  • Ring, Sealing 2 Inch Rubber W/STL (1)
  • Romex Connector (5)
  • Saddle Grip Connector (5)
  • Screw-On Liquid Tight Connector (1)
  • Service Entrance Kit (1)
  • Set Screw Connector (1)
  • Single Eye Bus Drop Grip (2)
  • Snap 2 It Connector 38 (1)
  • SNAP2IT Snap In Duplex 3838 (1)
  • SNG Sup GRP 1.5CBL SNG Eye (1)
  • SNG Sup GRP 1CBL SNG Eye (1)
  • SNG Weave Sup GRP.5CBL SNG Eye (1)
  • Squeeze Connector (16)
  • Strain Relief Connector (11)
  • Strain Relief Cord and Cable Connector (8)
  • Strain Relief Cord Connector (2)
  • Strain Relief Grip (4)
  • Strap (4)
  • Strap Connector (14)
  • TMC Armored Cable Gland (10)
  • Weatherproof Conduit Hub 1 1/2 (1)
  • Wedge Grip Clamp (2)
  • WHT Horiz In Box Brick (1)
  • Wire Holder (4)
  • Y Kit (1)
  • Show More...

• Cover Type

  

  • CLEAR (1)
  • Plastic (2)
  • Show More...

• Thickness

  

  • 1/16 (1)
  • 11/64 in (1)
  • 15/64 in (2)
  • 3/16 in (2)
  • 7/32 in (1)
  • Show More...

• Weight

  

  • 0.0001 lb/EA (1)
  • 0.0007 lb/EA (1)
  • 0.0038 lb/EA (1)
  • 0.0050 lb/EA (1)
  • 0.006 lb/EA (1)
  • 0.01 lb (1)
  • 0.01 lb/EA (1)
  • 0.010 lb/EA (1)
  • 0.014 lb/EA (1)
  • 0.017 lb/ft (1)
  • 0.0187 lb (1)
  • 0.0189 lb/EA (1)
  • 0.019 lb/EA (1)
  • 0.02 lb/EA (1)
  • 0.034 lb/EA (1)
  • 0.038 lb/EA (1)
  • 0.04 lb/EA (1)
  • 0.0419 lb (1)
  • 0.046 lb/EA (1)
  • 0.049 lb/EA (2)
  • 0.05 lb/EA (8)
  • 0.051 lb/EA (1)
  • 0.0513 lb/EA (1)
  • 0.0523 lb/EA (1)
  • 0.058 lb/EA (1)
  • 0.06 lb (1)
  • 0.06 lb/EA (1)
  • 0.061 lb (1)
  • 0.061 lb/EA (1)
  • 0.062 lb/EA (3)
  • 0.064 lb/EA (2)
  • 0.06821 lb (1)
  • 0.0696 lb/EA (1)
  • 0.07 lb/EA (2)
  • 0.076 lb/EA (2)
  • 0.08 lb (2)
  • 0.08 lb/EA (4)
  • 0.082 lb/EA (2)
  • 0.0839 lb/EA (1)
  • 0.085 lb/EA (2)
  • 0.09 lb (1)
  • 0.09 lb/EA (2)
  • 0.095 lb/EA (1)
  • 0.09597 lb (1)
  • 0.096 lb/EA (1)
  • 0.0984 lb/EA (1)
  • 0.1 lb (1)
  • 0.1 lb/EA (14)
  • 0.100 lb/EA (1)
  • 0.1016 lb/EA (1)
  • 0.102 lb/EA (1)
  • 0.108 lb/EA (1)
  • 0.109 lb/EA (1)
  • 0.11 lb (2)
  • 0.112 lb/EA (1)
  • 0.11525 lb (1)
  • 0.117 lb/EA (1)
  • 0.118 lb/EA (2)
  • 0.1289 lb/EA (1)
  • 0.130 lb/EA (1)
  • 0.1328 lb/EA (1)
  • 0.133 lb/EA (1)
  • 0.137 lb/EA (1)
  • 0.14 lb (1)
  • 0.14 lb/EA (2)
  • 0.144 lb/EA (1)
  • 0.15 lb (1)
  • 0.15 lb/EA (4)
  • 0.15759 lb (1)
  • 0.159 lb/EA (1)
  • 0.16 lb/EA (1)
  • 0.167 lb/EA (1)
  • 0.174 lb/EA (1)
  • 0.186 lb/EA (1)
  • 0.187 lb/EA (1)
  • 0.19 lb (2)
  • 0.193 lb/EA (1)
  • 0.19444 lb (1)
  • 0.2 lb/EA (4)
  • 0.208 lb/EA (1)
  • 0.21 lb/EA (1)
  • 0.22 (1)
  • 0.22 lb/EA (2)
  • 0.225 lb/EA (1)
  • 0.226 (1)
  • 0.228 (1)
  • 0.23 (2)
  • 0.23 lb (1)
  • 0.25 lb/EA (1)
  • 0.250 lb/EA (1)
  • 0.27 lb/EA (2)
  • 0.2779 lb/EA (1)
  • 0.286 lb/EA (1)
  • 0.29 lb/EA (1)
  • 0.30108 lb (1)
  • 0.31 lb/EA (1)
  • 0.320 lb/EA (1)
  • 0.34 lb/EA (2)
  • 0.35 lb (1)
  • 0.35 lb/EA (1)
  • 0.36 lb/EA (2)
  • 0.38 lb/EA (1)
  • 0.389 lb/EA (1)
  • 0.4 lb/EA (2)
  • 0.404 lb/EA (1)
  • 0.41 lb/EA (1)
  • 0.428 lb/EA (1)
  • 0.44 lb (1)
  • 0.48 lb/EA (1)
  • 0.5 lb/EA (1)
  • 0.500 lb/EA (1)
  • 0.51 lb/EA (2)
  • 0.52 lb/EA (2)
  • 0.55 lb (2)
  • 0.550 lb/EA (1)
  • 0.56 lb (1)
  • 0.575 lb/EA (1)
  • 0.59 lb (2)
  • 0.6 lb/EA (1)
  • 0.62 lb/EA (1)
  • 0.628 lb/EA (1)
  • 0.635 lb/EA (1)
  • 0.664 lb/EA (1)
  • 0.69 lb (1)
  • 0.72 lb (1)
  • 0.768 lb/EA (1)
  • 0.8 lb/EA (1)
  • 0.85 lb/EA (1)
  • 0.87 lb/EA (1)
  • 0.9 lb/EA (2)
  • 1 lb/EA (2)
  • 1.01 lb/EA (1)
  • 1.08 lb (1)
  • 1.08 lb/EA (1)
  • 1.1 lb (2)
  • 1.12 lb (1)
  • 1.1239 lb/EA (1)
  • 1.1599 lb (1)
  • 1.16 lb (1)
  • 1.19 lb (2)
  • 1.2 lb/EA (1)
  • 1.36 lb/EA (1)
  • 1.4799 lb/EA (1)
  • 1.499 lb/EA (1)
  • 1.6 lb/EA (1)
  • 1.9599 lb/EA (1)
  • 10 kg/100;22 lb/100 (1)
  • 10 lb (1)
  • 10 lb/100 (6)
  • 10.3 kg/100;23 lb/100 (1)
  • 11.3 lb/100 (2)
  • 110.2 lb/100 (1)
  • 1100 lb/100 (1)
  • 12.5 lb/100 (2)
  • 121.3 lb/100 (1)
  • 1234.6 lb/100 (1)
  • 125 lb/100 (1)
  • 129 lb/100 (1)
  • 13 lb/100 (2)
  • 13 lb/100 ft (1)
  • 13.38 lb/100 (1)
  • 13.81 lb/100 (1)
  • 131.5 kg/100;290 lb/100 (1)
  • 14 lb/100 (7)
  • 15 lb (3)
  • 15 lb/100 (1)
  • 15.4 kg/100;34 lb/100 (1)
  • 152 lb/100 (1)
  • 155 lb/100 (2)
  • 16 lb/100 (1)
  • 160.5 lb/100 (1)
  • 17.5 lb/100 (1)
  • 17.6 lb/100 (1)
  • 17.7 kg/100;39 lb/100 (1)
  • 176.4 lb/100 (2)
  • 179.5 lb/100 (1)
  • 18 lb/100 (2)
  • 19 lb/100 (1)
  • 19.5 lb/100 (1)
  • 19.63 lb/100 (1)
  • 2.31 kg (1)
  • 2.35 lb/EA (1)
  • 2.5 lb/EA (1)
  • 2.56 lb/EA (1)
  • 2.68 lb (1)
  • 2.7 lb (2)
  • 20 lb/100 (2)
  • 20.5 lb/100 (1)
  • 204.1 kg/100;450 lb/100 (1)
  • 21 lb/100 (2)
  • 21 lb/EA (1)
  • 212.5 lb/100 (1)
  • 23 lb/100 (1)
  • 25 lb/100 (2)
  • 26.7 lb/100 (1)
  • 27.1 lb/100 (1)
  • 28.1 kg/100;62 lb/100 (1)
  • 28.7 lb/100 (2)
  • 28.9 lb/100 (1)
  • 3 lb (1)
  • 3 lb/EA (1)
  • 3.34 lb/EA (1)
  • 3.54 lb/EA (1)
  • 3.61 lb/EA (1)
  • 3.7 lb (1)
  • 31.1 lb/100 (1)
  • 32 lb/100 (2)
  • 32.88 lb/100 (1)
  • 33.13 lb/100 (1)
  • 334.5 lb/100 (1)
  • 361.5 lb/100 (1)
  • 363.8 lb/100 (1)
  • 37.5 lb/100 (6)
  • 38.1 kg/100;84 lb/100 (1)
  • 39.7 lb/100 (3)
  • 4 lb (2)
  • 4 lb/EA (1)
  • 4.5 lb/EA (1)
  • 44.1 lb/100 (2)
  • 44.30 lb;20.09 Kg (1)
  • 45 lb/EA (1)
  • 450 lb/100 (1)
  • 456.4 lb/100 (1)
  • 5 lb (4)
  • 5 lb/EA (1)
  • 51.7 kg/100;114 lb/100 (1)
  • 525 lb/100 (1)
  • 53 lb/100 (1)
  • 54.4 kg/100;120 lb/100 (1)
  • 6 lb/100 (1)
  • 6 lb/EA (2)
  • 6.8 kg/100;15 lb/100 (1)
  • 60 lb/100 (1)
  • 63.5 lb/100 (1)
  • 7 lb (3)
  • 7 lb/EA (1)
  • 70.5 lb/100 (1)
  • 700 lb/100 (1)
  • 74 lb/100 (1)
  • 74.5 lb/100 (1)
  • 74.8 kg/100;165 lb/100 (1)
  • 762.5 lb/100 (1)
  • 785.5 lb/100 (1)
  • 789.2 lb/100 (1)
  • 8 lb (1)
  • 8 lb/100 (1)
  • 859.8 lb/100 (1)
  • 96.1 lb/100 (1)
  • 96.5 lb/100 (1)
  • 99.2 lb/100 (1)
  • Show More...

• Cable Size

  

  • #10 to #8 AWG (1)
  • #3/0,#4/0 (1)
  • #4 and #2 Bare Copper (1)
  • (3) 1/0 to (3) 4/0 AWG (1)
  • .32"-.43" (.81-1.09) (1)
  • .43"-.54" (1.09-1.37) (1)
  • .43"-.56" (1.09-1.42) (1)
  • .50"-.62" (1.27-1.57) (2)
  • .54"-.73" (1.37-1.85) (1)
  • .56"-.73" (1.42-1.85) (1)
  • .63"-.74" (1.60-1.88) (1)
  • .73"-.85" (1.85-2.16) (1)
  • .73"-.97" (1.85-2.46) (1)
  • .75"-.99" (1.90-2.51) (1)
  • 0.430 To 0.560 In Diameter (1)
  • 0.560 To 0.690 In Diameter (1)
  • 0.85 TO 1 INCH (1)
  • 1 TO 1.25 INCH (1)
  • 1-1/4 to 3 in (2)
  • 12/4, 10/2, 10/3 (1)
  • 14/2 AWG;10/3 AWG;12/2 AWG;14/3 AWG (1)
  • 14/2 to 10/3 (2)
  • 14/2, 12/2 (1)
  • 14/2, 14/3, 12/2 (1)
  • 14/3, 12/3 (1)
  • 2/3 (1)
  • 8/3 AWG;6/3 AWG;14/2 AWG;8/2 AWG (1)
  • Cable Dia. Range: 0.250-0.360; Mesh Length: 5 (1)
  • Cable Dia. Range: 0.400-0.560; Mesh Length: 5.00 (1)
  • Cable Dia. Range: 0.410-0.560; Bale Length: 9; Mesh Length: 5.0 (1)
  • Cable Dia. Range: 0.500-0.610; Bale Length: 7; Mesh Length: 11 (1)
  • Cable Dia. Range: 0.520-0.730; Mesh Length: 9.00 (1)
  • Cable Dia. Range: 0.530-0.730; Bale Length: 9; Mesh Length: 6.5 (1)
  • Cable Dia. Range: 0.620-0.740; Bale Length: 8; Mesh Length: 11 (1)
  • Cable Dia. Range: 0.700-0.850; Bale Length: 9; Mesh Length: 8.5 (1)
  • Cable Dia. Range: 0.750-0.990; Bale Length: 8; Mesh Length: 14 (1)
  • Cable Dia. Range: 1.000-1.240; Bale Length: 9; Mesh Length: 15 (1)
  • Cable Dia. Range: 1.500-1.740; Bale Length: 12; Mesh Length: 18 (1)
  • Holds Up To (4) 14/2 - 10/2 AWG Flat (Any Combinat (1)
  • NPT Size: 1/2; Cable Dia. Range: 0.300-0.430 (1)
  • NPT Size: 1/2; Cable Dia. Range: 0.400-0.540 (1)
  • NPT Size: 1/2; Cable Dia. Range: 0.440-0.500 (1)
  • NPT Size: 1/2; Cable Dia. Range: 0.560-0.625 (1)
  • NPT Size: 1; Cable Dia. Range: 0.700-1.000 (1)
  • NPT Size: 1-1/4; Cable Dia. Range: 0.940-1.250 (1)
  • NPT Size: 3/4; Cable Dia. Range: 0.440-0.500 (1)
  • NPT Size: 3/4; Cable Dia. Range: 0.520-0.730 (1)
  • NPT Size: 3/4; Cable Dia. Range: 0.560-0.625 (1)
  • NPT Size: 3/4; Cable Dia. Range: 0.670-0.750 (1)
  • Show More...

• Height

  

  • 0.5 (1)
  • 0.545 (1)
  • 0.563 (1)
  • 0.57 (1)
  • 1.895 (1)
  • 1.92 (1)
  • 1-1/8 (1)
  • 4.934 in (1)
  • 5.160 in (1)
  • Show More...

• Cord Size

  

  • 0.43 TO 0.54 INCH (1)
  • 0.5 TO 0.625 INCH (1)
  • 0.625 TO 0.75 INCH (1)
  • Show More...

• Hub Size

  

  • 1-1/2" (1)
  • 2" (1)
  • Show More...

• Bend Radius

  

  • 3.25 in (1)
  • 4.25 in (1)
  • Show More...