Vendor: Sylvania (SYL)
Elliott Catalog: F032741EC0
General Description: 32W, 48" MOL, T8 OCTRON fluorescent lamp, 4100K color temperature, rare earth phosphor, 75 CRI, suitable for IS or RS operation, ECOLOGIC

PRODUCT INFORMATION
Abbrev. With Packaging Info. FO32741ECO 30/CS 1/SKU
Actual Length (in) 47.78
Actual Length (mm) 1213.6
Average Rated Life (hr) 20000
Base Medium Bipin
Bulb T8
Color Rendering Index (CRI) 75
Color Temperature/CCT (K) 4100
Diameter (in) 1.10
Diameter (mm) 27.9
Family Brand Name Octron� 700, Ecologic
Industry Standards ANSI C78.81 - 2001
Initial Lumens at 25C 2800
Mean Lumens at 25C 2520
Nominal Length (in) 48
Nominal Wattage (W) 32.00
Value Added Product YES

ADDITIONAL PRODUCT INFORMATION
This Lamp meets minimum Federal efficiency standards.
This ECOLOGIC® lamp was designed to pass the Federal TCLP criteria for classification as non-hazardous waste in most states. Disposal regulations may vary; check local and state regulations.
This lamp is a High Color Rendering Lamp.
FOOTNOTES
  • Approximate initial lumens after 100 hours operation.
  • The life ratings of fluorescent lamps are based on 3 hr. burning cycles under specified conditions and with ballast meeting ANSI specifications. If burning cycle is increased, there will be a corresponding increase in the average hours life.
  • The life rating of OCTRON and OCTRON Curvalume lamps operated on magnetic rapid start ballasts is 20,000 hours. The life rating of OCTRON and OCTRON Curvalume lamps operated on instant start electronic ballasts is 15,000 hours.
  • Minimum starting temperature is a function of the ballast; consult the ballast manufacturer.
  • OCTRON lamps should be operated only with magnetic rapid start ballasts designed to operate 265 mA, T-8 lamps or high frequency (electronic) ballasts that are either instant start, or rapid start, or programmed rapid start specifically designed to operate T8 lamps. OCTRON lamps may be operated on instant start ballasts with ballast factors ranging from a minimum of 0.71 to a maximum of 1.20 at the nominal ballast input voltage. When OCTRON lamps are operated in the instant start mode, the two wires or two contacts of each socket should be connected to each other. They should then be connected to the appropriate ballast lead wire using National Electric Code techniques.
  • SYLVANIA ECOLOGIC fluorescent lamps are designed to pass the Federal Toxic Characteristic Leaching Procedure (TCLP)criteria for classificat ion as non-hazardous waste in most states. TCLP test results are available upon request. Lamp disposal regulations may vary, check your local & state regulations.